kangsuper

Minggu, 20 Maret 2016

Flash Mito A77


Buat yang salah versi jadi matot, ada dua versi JB dan KK, All tested OK, silahkan:

  1.  Download firmwarenya Mito A77 JB dan Mito A77 KK
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Flash Mito A77 via SP Flash Tool

Video

Mito A77 JB


Mito A77 KK


Log read Mito A77 JB

Start  at : [3/14/2016 / 5:58:21 PM]
Operation : Check / Read Info [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3557564D42012018D8463105
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42012018D8463105
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 882AB435C79BA997BE85020EE4D34BFD
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : MITO
ProdName  : ratech72_wet_rlk_jb3
ProdModel : MITO A77
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

EXTRA :
LCD [0] : sh1282_dsi
LCD [1] : rm68171_dsi
LCD Res : 854x480
TOUCH [0] : ft5206
CAM [0] : ov5650_mipi_yuv
CAM [1] : gc0329_yuv
MODEM : ratech72_wet_rlk_jb3_hspa_2band
LOCALE : in_ID zh_CN en_US hdpi

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

Finish at : [3/14/2016 / 5:58:34 PM]


Start  at : [3/14/2016 / 6:34:52 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3557564D42012018D8463105
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42012018D8463105
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : MITO
ProdName  : ratech72_wet_rlk_jb3
ProdModel : MITO A77
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_ratech72_wet_rlk_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_jb3 / EMMC
FW Size : 678 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__MITO__MITO_A77__ratech72_wet_rlk_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:03:38
Reconnect Power/Cable!

Finish at : [3/14/2016 / 6:38:30 PM]


Log read Mito A77 KK

Start  at : [12/22/2015 / 6:39:40 PM]
Operation : Check / Read Info [ v1.39 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3558564D42017A4FD685411D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX5
[eMMC] : FLASH_CID : 1501004B3558564D42017A4FD685411D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : MITO
ProdName  : ratech72_we_72_rlk_kk
ProdModel : A77
Device    : ratech72_we_72_rlk_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

MODEM :
BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_1_wg_n

EXTRA :
LCD [0] : sh1282_dsi
LCD [1] : rm68171_dsi
LCD Res : 854x480
TOUCH [0] : ft5206
CAM [0] : ov5650_mipi_yuv
CAM [1] : gc0329_yuv
MODEM : ratech72_we_72_rlk_kk_hspa
LOCALE : in_ID zh_CN en_US

Done!
Elapsed: 00:00:24
Reconnect Power/Cable!

Finish at : [12/22/2015 / 6:40:05 PM]



Start  at : [12/28/2015 / 6:10:19 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3558564D42017A4FD685411D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX5
[eMMC] : FLASH_CID : 1501004B3558564D42017A4FD685411D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : MITO
ProdName  : ratech72_we_72_rlk_kk
ProdModel : A77
Device    : ratech72_we_72_rlk_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_ratech72_wet_rlk_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_jb3 / EMMC
FW Size : 687 MiB
Scatter saved to : G:\andro3\mito a77\MT6572__MITO__A77__ratech72_we_72_rlk_kk__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:03:47
Reconnect Power/Cable!




9 komentar:

  1. um ane minta password firmware nya dong? ane mahar deh , penting um

    BalasHapus
    Balasan
    1. sms nomor didalam zip gan, mito a77 mahar pulsa 10k, thx

      Hapus
  2. OM PASWORT NYA KAH DARURAT NI,MASALAH MAHAR GAMPANG

    BalasHapus
  3. password.a apa um???,,masalah mahar gampang

    BalasHapus
    Balasan
    1. Konfirmasi pass sms 0896-1384-0593 Mahar pulsa 10k

      Hapus
  4. password rar nya donk gan.. ane kasih mahar pulsa..

    BalasHapus
  5. Goyangke polpene kang, nota-nota, salah flash ke jb jadi matot, qiqiqii, akhirnya ketemu file aslinya, nyala lagi.. suwon kang

    BalasHapus
  6. makasih gan frimwarenya mito saya hidup lagi!!
    posting frimware lain ya gan!!

    BalasHapus

Poskan Komentar