kangsuper

Kamis, 28 Desember 2017

Flash & Hapus FRP Lava IRIS 600 ( Bypass akun Google )


FRP Lava IRIS 600  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : LAVA
ProdName  : iris 600
ProdModel : iris 600
Device    : lava72_sp51
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V1_LAVA6572.WE.L

Bahan :

pass : iris-600sip

  1. Download  Firmware Lava IRIS 600  + FRP ONLY  atau Download Disini (67KB)
  2. Download  Firmware FULL Lava IRIS 600  + FRP  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Lava IRIS 600, hanya centang pada tab FRP, lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

 Cara Flash Lava Iris 600 via Flash Tool

Log Read Firmware Lava Iris 600
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505073298A91923A3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505073298A91923A3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDD43EDC79AF96D62FE9A4E9ED
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : LAVA
ProdName  : iris 600
ProdModel : iris 600
Device    : lava72_sp51
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V1_LAVA6572.WE.L

[Read Ok] : preloader_lava72_sp51.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] :
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1583 MiB
Scatter saved to : D:\LAVA\IRIS 600\MT6572__LAVA__iris_600__lava72_sp51__5.1__ALPS.L1.MP6.V1_LAVA6572.WE.L\

All done!




Flash & Hapus FRP Alcatel 7049D BI / Bahasa Indonesia ( Akun Google )


FRP Alcatel 7049D  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : TCL
ProdName  : Alcatel_7049D
ProdModel : Alcatel_7049D
Device    : Lion-5
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : 7049D_APAC_AL_G50EN_V2.7_150918

Bahan :

  1.  Download  Firmware FULL Alcatel 7049D  + FRP  atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Alcatel 7049D, hanya centang pada tab FRP, lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Flash Alcatel 7049D via Flash Tool

Log Read Firmware Alcatel 7049D
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D313238B63E00429D2FBFDC
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42003EB6DCBF529D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD976BC8FEB3D13A033F55312E
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : TCL
ProdName  : Alcatel_7049D
ProdModel : Alcatel_7049D
Device    : Lion-5
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : 7049D_APAC_AL_G50EN_V2.7_150918

[Read Ok] : preloader_ze168.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6753 / V1.1.2 / ze168 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2185 MiB
Scatter saved to : D:\alcatel\7049D\MT6735__TCL__Alcatel_7049D__Lion-5__5.1__7049D_APAC_AL_G50EN_V2.7_150918\

All done!




Flash & Hapus FRP HIMAX M21i L107 / L109 / L111

FRP Himax M21i  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Himax
ProdName  : M21i
ProdModel : M21i
Device    : i6388
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : I6388_DI63881_HIMAX-M21I_L111

Bahan :
  1.  Download  Firmware Himax M21i L107 + FRP   atau Download Disini
  2.  Download  Firmware Himax M21i L109/L111 + FRP  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Himax M21i, hanya centang pada tab FRP, lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain


Cara Flash Himax M21i via flash tool


Log Read Firmware Himax M21i
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32584ED62D06423D31C5E0
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D42062DD6E0C5443D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDB8ED1484FD6A793D65E7FF43
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Himax
ProdName  : M21i
ProdModel : M21i
Device    : i6388
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : I6388_DI63881_HIMAX-M21I_L111

[Read Ok] : preloader_i6388.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / i6388 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3288 MiB
Scatter saved to : D:\himax\m21i\MT6737M__Himax__M21i__i6388__7.0__I6388_DI63881_HIMAX-M21I_L111\

All done!



Kamis, 21 Desember 2017

Flash Coolpad E560 via Fastboot & HS-9008 (MATOT)

COOLPAD E560
Brand     : Coolpad
ProdName  : cpkmini_g00
ProdModel : Coolpad E560
Device    : cpkmini_g00
AndroidVer: 5.1.1
Manufact. : Coolpad
QLMxCPU   : MSM8916

Bahan :

  • via Fastboot :
  1.      Download Fastboot Rom Coolpad E560  atau Download Disini
  2.      Download Tool dan Driver Coolpad E560 atau Download Disini (PASS YGDP : 369)
  3.      Untuk tutorial flash  bisa dilihat video dibawah
  • via EDL 9008 / CM2
  1.       Download Rom Coolpad E560 HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2 
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl
Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Cara Kerja :

1.    Matikan Coolpad E560 anda
2.    Tekan Volume up terus colok kabel USB, sehingga tampil seperti gambar dibawah

3.    Tekan Tobol Volume Up lagi, dan muncul tulisan seperti gambar dibawah

4.    Install driver dan Tool Coolpad E560 yang ada diatas
5.    Buka YGDP dengan Password 369
6.    Selanjutnya anda bisa lihat video dibawah

Video cara flash Coolpad E560

Log Read Firmware Coolpad E560
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0E813F4C
ID_BLOCK_I : 007050E1
ID_BLOCK_E : 00480000
ID_BLOCK_L : 98598B2F8FB813FB7CAE5AAE6B163EC4
ID_BLOCK_L : FA3D8AA8BB21D8D8AA2C7512E1C79892
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : Coolpad
ProdName  : cpkmini_g00
ProdModel : Coolpad E560
Device    : cpkmini_g00
AndroidVer: 5.1.1
Manufact. : Coolpad
QLMxCPU   : MSM8916

DevInfo : MSM8916__Coolpad__Coolpad__ANDR_v5.1.1__Coolpad_E560__cpkmini_g00__cpkmini_g00

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : param.cfg
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 1349 MiB
Done!


Rabu, 13 Desember 2017

Flash Advan S4T SC7731 & SC7731C

Model Name  : S4T
Model Brand : ADVAN
Model Device: S4T
AndrVersion : 5.1.2
BaseBand CPU: S4T
Project Ver : S4T_WG4036_V0.5_20160406
Model Ext   : S4T

Bahan :

  1.  Download Firmware PAC ADVAN S4T V0.5 atau  Download Disini
  2.  Download Firmware PAC ADVAN S4T V1.2 atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Note :
1. Boot Volume UP
2. Buat cek versi V05 atau V1.2 flash saja, bila tidak jalan berarti versi satunya

Cara Flash Advan S4T via Research Download


Log Read Firmware Advan S4T
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : S4T
Model Brand : ADVAN
Model Device: S4T
AndrVersion : 5.1.2
BaseBand CPU: S4T
Project Ver : S4T_WG4036_V0.5_20160406
Model Ext   : S4T

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1276 MiB
Saved to : F:\ADVAN\ADVAN S4T\v05 ok\S4T_S4T_5.1.2_S4T_WG4036_V0.5_20160406_S4T\
Done!




Selasa, 12 Desember 2017

Flash & Hapus FRP Attila Mate8 Plus MT6572 & MT6580


Attila Mate 8+   Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : ATTILA
ProdName  : full_w825_648_ax_xxh_t1_att
ProdModel : attila MATE8 PLUS
Device    : w825_648_ax_xxh_t1_att
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : w825_648_ax_xxh_t1_att_v1.6

Bahan :
  1.  Download  Firmware MT6580 Attila Mate 8 plus + FRP Lolypop 5.1 atau Download Disini
  2.  Download  Firmware MT6572 Attila Mate 8 plus Kitkat 4.4 atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Cara Kerja :
1. Buat remove verifikasi akun google Attila mate 8+ tinggal pake CENTANG FRP only, hanya centang pada tab FRP saja

Cara Flash aTTILA MATE 8+   via Flash Tool




Log Read Firmware Attila Mate 8+
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454838434538011E9EB5A063BB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 8EC8H
[eMMC] : FLASH_CID : 700100454838434538011E9EB5A063BB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDED5DDB51D2AB7E2A45BA2077
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!

Brand     : ATTILA
ProdName  : full_w825_648_ax_xxh_t1_att
ProdModel : attila MATE8 PLUS
Device    : w825_648_ax_xxh_t1_att
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : w825_648_ax_xxh_t1_att_v1.6

[Read Ok] : preloader_w825_648_ax_xxh_t1_att.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w825_648_ax_xxh_t1_att / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1777 MiB
Scatter saved to : D:\New folder\MT6580__ATTILA__attila_MATE8_PLUS__w825_648_ax_xxh_t1_att__5.1__w825_648_ax_xxh_t1_att_v1.6\

All done!




Flash Mito A260 Kitkat & Lolypop


Model Name  : MITO_A260
Model Brand : MITO
Model Device: MITO_A260
AndrVersion : 4.4.2
BaseBand CPU: H620
Project Ver : MITO_A260_20150612_T04
Model Ext   : MITO_A260

Mito A260 KitKat T04 Disticker backcasing V3
Mito A260 KitKat T07 Disticker backcasing V2



Bahan :

  1.  Download Firmware PAC Mito A260 KitKat T04 atau  Download Disini
  2.  Download Firmware PAC Mito A260 KitKat T07 atau  Download Disini
  3.  Download Firmware PAC Mito A260 Lolypop T09 atau  Download Disini
  4.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  5.  Driver SPD by InfinityBox
  6.  Tutorial Flash via research here
  7.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Note :
1. Boot Volume DOWN

Cara Flash Mito A260 via Research Download


Log Read Firmware Mito A260
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : MITO_A260
Model Brand : MITO
Model Device: MITO_A260
AndrVersion : 4.4.2
BaseBand CPU: H620
Project Ver : MITO_A260_20150612_T04
Model Ext   : MITO_A260
[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.50_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 907 MiB
Saved to : E:\andro 1\mito\MITO A260\H620_MITO_A260_4.4.2_MITO_A260_20150612_T04_MITO_A260\
Done!