kangsuper

Sabtu, 17 Februari 2018

Flash & Bypass FRP Himax M21 ~ Verifikasi Akun Google

FRP Himax M21  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx


Device Brand   : HIMAX
Device Model   : M21
Device CPU     : MT6737M
Device IntName : M21
Device Version : 7.0
Device Compile : 9/23/2017 9:00:18 AM
Device Project : HIMAX_M21_0.07_923
Device ExtInfo : M21

HIMAX M21 WARNA ABU-ABU = EMAS

Bahan :
  1. Download  Firmware Himax M21 BYPASS FRP ONLY  atau Download Disini (75KB)
  2. Download  Firmware FULL Himax M21  + FRP  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass WA / sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Cara Kerja :
1. Buat remove / bypass FRP verifikasi akun google  Himax M21, hanya centang pada tab FRP, lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

 Cara Flash  Himax M21 via Flash Tool Bypass FRP only

Cara Flash  Himax M21 via Flash Tool + Bypass FRP



Log Read Firmware Himax M21
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM6)
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6735M_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 2 GiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: QE13MB (0x514531334d42), rev: 0x0D, serial number: 0x827AD331
Manufacturing date: Aug 2017
CID: 15010051 4531334D 420D827A D3318429
Capacity: 14.57 GiB(15,646,851,072 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
USB speed: High-Speed
platform: MT6737M, cpu abi: arm64-v8a
manufacturer: HIMAX
board: M21, name: M21
brand: HIMAX, model: M21
build id: NRD90M, version: 7.0 Nougat (HIMAX_M21_0.07_923)
build description: M21-user 7.0 NRD90M 1506157220 release-keys
crypto state: encrypted
BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM6)
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6735M_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 2 GiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: QE13MB (0x514531334d42), rev: 0x0D, serial number: 0x827AD331
Manufacturing date: Aug 2017
CID: 15010051 4531334D 420D827A D3318429
Capacity: 14.57 GiB(15,646,851,072 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
USB speed: High-Speed
platform: MT6737M, cpu abi: arm64-v8a
manufacturer: HIMAX
board: M21, name: M21
brand: HIMAX, model: M21
build id: NRD90M, version: 7.0 Nougat (HIMAX_M21_0.07_923)
build description: M21-user 7.0 NRD90M 1506157220 release-keys
crypto state: encrypted
Reading preloader_kon6737m_d6_65_n.bin... Done.
Reading pgpt... Done.
Reading proinfo.bin... Done.
Reading nvram... Done.
Reading protect1... Done.
Reading protect2... Done.
Reading lk.bin... Done.
Reading para... Done.
Reading boot.img... Done.
Reading recovery.img... Done.
Reading logo.bin... Done.
Reading expdb... Done.
Reading seccfg... Done.
Reading oemkeystore... Done.
Reading secro.img... Done.
Reading keystore... Done.
Reading trustzone.bin... Done.
Reading trustzone.bin... Done.
Reading frp... Done.
Reading nvdata... Done.
Reading metadata... Done.
Reading flashinfo... Done.
Files saved to \\D:\himax\m21\banteng\




Flash Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT


Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2407_V5.2.10_20161223
Model Ext   : POLYTRON R2407

Bahan :

  1.  Download Firmware PAC Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Firmware Polytron R2407 versi lainnya :
 Error pada research download baca disini

Note :
1. Boot volume +/-
2. BYPASS FRP Polytron R2407 via research Download, Pastikan Polytron R2407 normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang


Cara Flash Polytron R2407 via Research Download


Log Read Firmware Polytron R2407 white gold zt
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2407_V5.2.10_20161223
Model Ext   : POLYTRON R2407

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
Skip [NID] : WFIXNV1
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
Skip [NID] : WCNFIXNV1
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.img
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2235 MiB
Saved to : E:\andro 1\polytron\r2407\r2407 white gold zt\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2407_V5.2.10_20161223_POLYTRON_R2407\
Done!  


Flash Asus Z010D ZC550KL via Fastboot 1 Klik


Bahan :

1. Download Firmware ASUS Z010D / ZC550KL 1KLIK Fastboot Mode atau Download Disini
2. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara kerja :
1.  Matikan Asus Z010D
2. Tekan volum up + on sampe muncul fastboot mode
3. Colokan Asus Z010d ke PC
4. Install driver Download Disini
5. Klik flashall.bat, selanjutnya lihat video
6. Flash done, auto restart, tunggu loading, biasanya lama habis flash
7. Bila tetep stuck, masuk recovery volume down + on, reset factory
8. Done

Baca Juga :

Video Cara Flash Asus Z010D 1klik fastboot mode





Sabtu, 03 Februari 2018

Flash Advan S5E 4GS SN: S5ESS32 & SN: S5ESSLD & BYPASS FRP / Lock Akun Google


FRP Advan S5E 4GS  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx


Model Name  : 5060
Model Brand : ADVAN
Model Device: ADVAN_5060
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
CompileDate : 8/24/2017 3:11:36 AM
Project Ver : S5E_4GS_LF5041AV_V1.0_20170824
Model Ext   : 5060

NOTE :  cek dibawah imei ; SN: S5ESS32 & SN: S5ESSLD

Bahan :

*) BYPASS FRP ONLY / BYPASS AKUN GOOGLE
Cara Kerja :
  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (+)
    BYPASS FRP  ADVAN S5E 4GS, Silahkan menggunakan File PAC BYPASS FRP ONLY, ukuran man 1MB


 *) FIRMWARE PAC FULL
1. Advan Advan S5E 4GS & Tool STICKER SN : S5ESSLD


2. Advan S5E 4GS & Tool STICKER  SN: S5ESS32

3. Driver SPD by InfinityBox

4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note : HARAP DIBACA
1. cek dibawah imei ;  SN: S5ESS32 & SN: S5ESSLD
bila sticker hilang, untuk mengetahui versi yg mana, silahkan lakukan flashing via Research download atau QGDP, bila gak jalan berarti versi satunya
2. S5E 4GS  SN : S5ESSLD flash via Research Download
3. S5E 4GS   SN: S5ESS32 flash via QGDP (PASS QGDP : 369)
4. BOOT vol+

Cara Flash Advan S5E 4GS via QGDP tool

Log Read Info Firmware Advan S5E 4GS
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : 5060
Model Brand : ADVAN
Model Device: ADVAN_5060
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
CompileDate : 8/24/2017 3:11:36 AM
Project Ver : S5E_4GS_LF5041AV_V1.0_20170824
Model Ext   : 5060

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:24


Cara Flash & Firmware Mito A230 V2 T06 & T02


Model Name  : A230
Model Brand : MITO
Model Device: A230
AndrVersion : 5.1
BaseBand CPU: C7368_FWVGA
CompileDate : 5/8/2017 4:00:58 AM
Project Ver : MITO_A230_20170508_324_T06
Model Ext   : MITO A230

Bahan :

  1.  Download Firmware PAC Mito A230 T06 / T02 atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass WA / sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
 Error pada research download baca disini


Cara Flash Mito A230 via Research Download


Log Info Mito A230 V2
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : A230
Model Brand : MITO
Model Device: A230
AndrVersion : 5.1
BaseBand CPU: C7368_FWVGA
CompileDate : 5/8/2017 4:00:58 AM
Project Ver : MITO_A230_20170508_324_T06
Model Ext   : MITO A230

Loading    : MITO_A230_20161103_324_T02_V2.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : T02
FastCheck  : 0x006ED7CE20

Loading files ...

File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731C_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
File : logo_480x854.bin
File : fblogo_480x854.bin
File : boot.img
File : system.img
File : oem.img
File : sysinfo.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin
File : SC77xx.xml

Load Ok!



Flash Mito A880 Black / White SC7731C & Bypass FRP akun Google


FRP Mito A880  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Model Name  : MITO A880
Model Brand : MITO
Model Device: MITO-A880
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MITO_A880_12092017_V04
Model Ext   : MITO A880

Bahan :

A. BYPASS FRP ONLY / BYPASS AKUN GOOGLE
B. Download Firmware PAC FULL


C. BYPASS FRP via SDCARD Download APK buat BYPASS FRP Mito A880 atau Download Disini 

D. Tool
  1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2.  Driver SPD by InfinityBox
  3.  Tutorial Flash via research here
  4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Cara Kerja :
  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bypass FRP via APK /SDCARD tutor dibawah
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (-)
  • Flash  Mito A880 via research Download, flash aja dgn rom diatas + BYPASS FRP
    BYPASS FRP  Mito A880, hanya centang pada FDL1, FDL 2, dan persist



Cara Flash Mito A880 via Research Download


Cara Bypass FRP Mito A880 Via MMC / SDCARD
1. Sudah konek WIFI atau pake paket data, apk dah dicopy ke mmc, pasang ke mito A880
2. Ketikan huruf di wifi pada sandi, blok kata tsb
3. pilih bantuan
4. masuk google ketikan file manager
5. Install Google Akun Manager V6
6. Install  quickshortcutmaker dan jalankan
6. pilih/cari Pengelola Akun Google => Pilih Ketikan Email & sandi=>COBA
7. sentuh titik 3 di pojok kanan atas => masuk browser
8. masukkan email gmail dan sandi
9. Restart
10. tinggal next-2 sampai masuk menu, aktifkan ADB, RESET FACTORY
11. Done
Note : harap dikasih sim waktu reset Mito A880
Video BYPASS FRP Mito A880


Log Read Firmware Mito A880
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : MITO A880
Model Brand : MITO
Model Device: MITO-A880
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MITO_A880_12092017_V04
Model Ext   : MITO A880

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1940 MiB
Saved to : E:\mito\mito a880\SP7731CEA_MITO-A880_6.0_MITO_A880_12092017_V04_MITO_A880\
Done!