kangsuper

Rabu, 26 Januari 2022

Firmware OPPO A31 CPH2015 Scatter file Flashtool

 NO SS

patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 15.11.2021
Product Brand  : OPPO
Product Model  : CPH2015
Product Info   : CPH2015
Product Name   : CPH2015
Product Device : OP4C7D
SW OTA Version : CPH2015PUEX_11.A.59_0590_202111151459
Display ID     : CPH2015EX_11_A.59
Display ID     : CPH2015EX_11_A.59_211115
Kernel Info    : 4.9.117


MT6765__CPH2015_11_A.33_200526_1f227dce

Bahan :
1. Download ROM Firmware OPPO A31 CPH2015 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-


 


Operation : Read Firmware [ v2.29 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : CEBFF1708A790DD21ECEC29A299B6025
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : A67F272DF7F907ECA261561948150E8B1B00034C7F1CD1FE17E2B241FFB3A142
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19581.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 13014E53304A394B391017915D26175D
        EMMC: VEN : MICRON : OEM : 78 : ID : 53304A394B39
        EMMC: VEN : MICRON : S0J9K9
        EMMC: SNN : 395402534 ( 0x17915D26) , MF : 1/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 7F4A4369CC48DF4FF1DA145A60D723B8

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 15.11.2021
Product Brand  : OPPO
Product Model  : CPH2015
Product Info   : CPH2015
Product Name   : CPH2015
Product Device : OP4C7D
SW OTA Version : CPH2015PUEX_11.A.59_0590_202111151459
Display ID     : CPH2015EX_11_A.59
Display ID     : CPH2015EX_11_A.59_211115
Kernel Info    : 4.9.117


MT6765__CPH2015_11_A.33_200526_1f227dce

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 57%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 35%
Read : system.img
ExtSparse : Compression ratio : 55%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 3.66 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo a31 CPH2015\MT6765__CPH2015_11_A.33_200526_1f227dce\

Done!
Elapsed: 00:12:58






Firmware OPPO A15s CPH2179 Scatter file Flashtool

 No ss

Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020 release-keys
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-12-05
Build Time     : 26.11.2021
Product Info   : oppo6765

MT6765__CPH2179_11_A.21_210214_c79501ea

Bahan :
1. Download ROM Firmware OPPO A15s CPH2179 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 




Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 023609E206F0D8EFC191F7D21104F272
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : BFC8C46D6CF78F3627A63324CD08B5B099D4DF275C4CD88988D3C89DD0E5F2C7
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 000C
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 15010044483644414208CA8EDC03C70B
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444142
        EMMC: VEN : SAMSUNG : DH6DAB
        EMMC: SNN : 3398360067 ( 0xCA8EDC03) , MF : 12/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 46629749DAA1E60A66FDD49199A81EAE

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020 release-keys
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-12-05
Build Time     : 26.11.2021
Product Info   : oppo6765


MT6765__CPH2179_11_A.21_210214_c79501ea

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 82%
Read : opporeserve3.img
Read : oppo_custom.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 98%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : cdt_engineering.img
Read : ocdt.img
Read : special_preload.img
ExtSparse : Compression ratio : 99%
Read : my_custom.img
ExtSparse : Compression ratio : 99%
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 16%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 6.93 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\a15s\MT6765__CPH2179_11_A.21_210214_c79501ea\

Done!


 

Jumat, 21 Januari 2022

Firmware MAIMETE M3 PRO MT6572 | MT6572__alps__m3_pro__x6_v5_x50__4.4.2__X3-m3_pro-CPT

 


Brand     : alps
ProdName  : x6_v5_x50
ProdModel : m3 pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : X3-m3_pro-CPT

Bahan :
1. Download ROM Firmware MAIMETE M3 PRO Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 

 Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D00CC3003312131
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00CC3003312131
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA931556796244718974A3739CD05F239
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : m3 pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : X3-m3_pro-CPT

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info savedg
FW Size : 678 MiB
Scatter saved to : D:\New folder\MT6572__alps__m3_pro__x6_v5_x50__4.4.2__X3-m3_pro-CPT\

All done!

 


Minggu, 16 Januari 2022

Firmware Oppo A54 CPH2239 SCATTER FILE | REPAIR DEAD BOOT| MT6765__CPH2239_11_A.01_210317

 

Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020 release-keys
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-04-05
Build Time     : 17.04.2021
Product Info   : oppo6765
MT6765__CPH2239_11_A.01_210317_8f7e093b

Bahan :
1. Download ROM Firmware Oppo A54 CPH2239 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 

 


 

Operation : Read Firmware [ v2.29 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 4AB0679784DBB8D782294C2D522ED95A
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 16DF90422903E62D7C0065239E6D45DE1C564934524B618179DF732657C9EED3
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 13014E47314A395339100F0D198D2821
        EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339
        EMMC: VEN : MICRON : G1J9S9
        EMMC: SNN : 252516749 ( 0x0F0D198D) , MF : 2/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 7CDD0F167DEE65839505938CA396149C

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020 release-keys
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-04-05
Build Time     : 17.04.2021
Product Info   : oppo6765


MT6765__CPH2239_11_A.01_210317_8f7e093b

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 88%
Read : oppo_custom.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : cdt_engineering.img
Read : ocdt.img
Read : special_preload.img
ExtSparse : Compression ratio : 99%
Read : my_custom.img
ExtSparse : Compression ratio : 99%
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 42%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 4.86 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo a54 cph2239\MT6765__CPH2239_11_A.01_210317_8f7e093b\

Done!
Elapsed: 00:15:48


 

 

 

 

Sabtu, 15 Januari 2022

Firmware Samsung A015F QFIL Repair Dead boot

 

Software    : RP1A.200720.012.A015FXXU4BUD8, A015FXXU4BUD8 [Tue Apr 13 21:11:27 +07 2021]
Android Ver.    : 11
Patch Level    : 2021-04-01

Bahan :
1. Download ROM Firmware Samsung A015F QFIL / 9008 | QFIL QUALCOMM FILE ,

2. Tool pake UMT / UFI /HYDRA atau sejenisnya

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 Testpoin gambar diatas

 

 Operation    : Read Firmware
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00B00 [8937] 00002000
OPK_DATA    : 6C429E6D6583C49ADCAF169BD1A23255CCED44DF35B7F8A7A4F9795AED7AF713
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_044]...Done
Executing Loader...OK
Hardware    : 8937, EMMC, 16 GB
LU Count    : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
USERDATA    : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Software    : RP1A.200720.012.A015FXXU4BUD8, A015FXXU4BUD8 [Tue Apr 13 21:11:27 +07 2021]
Android Ver.    : 11
Patch Level    : 2021-04-01
Reading [sbl1]...Done
Reading [rpm]...Done
Reading [tz]...Done
Reading [devcfg]...Done
Reading [dsp]...Done
Reading [mdtp]...Done
Reading [sbl1bak]...Done
Reading [rpmbak]...Done
Reading [tzbak]...Done
Reading [devcfgbak]...Done
Reading [lksecapp]...Done
Reading [cmnlib]...Done
Reading [cmnlib64]...Done
Reading [keymaster]...Done
Reading [aboot]...Done
Reading [lksecappbak]...Done
Reading [cmnlibbak]...Done
Reading [cmnlib64bak]...Done
Reading [keymasterbak]...Done
Reading [abootbak]...Done
Reading [ddr]...Done
Reading [sec]...Done
Reading [splash]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [recovery]...Done
Reading [boot]...Done
Reading [modem]...Done
Reading [super]...Done
Reading [cache]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Reading [gpt_main1]...Done
Reading [gpt_back1]...DoneSevere Error!
Reading [gpt_main2]...Done
Reading [gpt_back2]...DoneSevere Error!
Saved to    : E:\SAMSUNG\_RP1A.200720.012.A015FXXU4BUD8_2021-04-01\
Operation Finished.
QcFire Ver. 7.4

 


Senin, 10 Januari 2022

Firmware Samsung A315G / A31 Scatter file | REPAIR DEAD BOOT

 

Product Brand  : samsung
Product Device : a31
Product Model  : SM-A315G
Product Name   : a31nsdx
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012.A315GDXU1CUG1
Build Time     : 02.07.2021
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-07-01
Product Info   : a31
Product Board  : k68v1_64_titan
Board Platform : mt6768
Product Manfct : samsung

MT6768__samsung__SM-A315G__11__RP1A.200720.012.A315GDXU1CUG1__RP1A.200720.012__a31

 

Bahan :
1. Download ROM Firmware Samsung A315G / A31 Scatter file,

2. Tool pake Infinity CM2 atau Flasher sejenis

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

TESTPOIN GAMBAR DIATAS

 

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 266D7B11292C58997BA49FFFA6E01696
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 565538BCCF73EFDC218E800352B6C82CD32BDF3665640F412955AE0B06F842CF
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k68v1_64_titan.bin
     EMI : CNT : 000C
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 150100335636434D42000241DCD1371F
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 335636434D42
        EMMC: VEN : SAMSUNG : 3V6CMB
        EMMC: SNN : 37870801 ( 0x0241DCD1) , MF : 3/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 98E240E23A4A2D1D19836B6DCB4FD92

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Device : a31
Product Model  : SM-A315G
Product Name   : a31nsdx
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012.A315GDXU1CUG1
Build Time     : 02.07.2021
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-07-01
Product Info   : a31
Product Board  : k68v1_64_titan
Board Platform : mt6768
Product Manfct : samsung

MT6768__samsung__SM-A315G__11__RP1A.200720.012.A315GDXU1CUG1__RP1A.200720.012__a31

Read : preloader.bin
Read : efs.img
ExtSparse : Compression ratio : 79%
Read : sec_efs.img
ExtSparse : Compression ratio : 23%
Read : param.img
Read : up_param.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : persistent.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : efuse.img
Read : nvram.bin
Read : vbmeta.img
Read : vbmeta_samsung.img
Read : boot.img
Read : dtbo.img
Read : steady.img
Read : gz.img
Read : lk.bin
Read : uh.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 36%
Read : prism.img
ExtSparse : Compression ratio : 67%
Read : optics.img
ExtSparse : Compression ratio : 91%
Read : cache.img
Read : omr.img
Read : spu.img
ExtSparse : Compression ratio : 100%

FW Size  : 4.53 GB
Android Info saved : _Android_info.txt
Scatter  : MT6768_Android_scatter.txt
Saved to : D:\New folder\MT6768__samsung__SM-A315G__11__RP1A.200720.012.A315GDXU1CUG1__RP1A.200720.012__a31\

Done!
Elapsed: 00:13:17

 


Sabtu, 08 Januari 2022

Firmware VIVO V2043 PD2036DF Scatter File | | REPAIR DEAD BOOT| PD2036DF_EX_A_6.11.0





VIVO V2043 PD2036DF

Product Brand  : vivo
Product Device : 2026
Product Model  : V2026
Product Name   : 2026
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012 release-keys
Product Info   : k65v1_64_bsp
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-01
Build Time     : 12.10.2021
Product Board  : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo

VIVO V2043 PD2036DF_MT6765__vivo__V2026__11__RP1A.200720.012__k65v1_64_bsp

VIVO V2043 PD2036DF pada tool CM2 terbaca vivo v2026

Bahan :
1. Download ROM Firmware Vivo V23e V2116 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-



Operation : Read Firmware VIVO V2043 PD2036DF [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B80885FBF441658318BAA4220158A84B
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FBA6AF9A3C50B8A4FA8A8BB724707E6E89F03285E57DF8509012CE3689ECB04A
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k65v1_64_bsp.bin
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A684339615033011028866B181F
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 271091307 ( 0x1028866B) , MF : 1/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 5275C828CFD8BE55F27933D06E86CC02

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : vivo
Product Device : 2026
Product Model  : V2026
Product Name   : 2026
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012 release-keys
Product Info   : k65v1_64_bsp
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-01
Build Time     : 12.10.2021
Product Board  : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo

MT6765__vivo__V2026__11__RP1A.200720.012__k65v1_64_bsp

Read : preloader.bin
Read : recovery.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : backup.img
Read : survival.img
Read : reserved.img
Read : cust.img
ExtSparse : Compression ratio : 95%
Read : vgc.img
ExtSparse : Compression ratio : 99%
Read : persist.img
ExtSparse : Compression ratio : 71%
Read : proinfo.img
Read : efuse.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 16%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.55 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\vivo\VIVO V2043 PD2036DF \MT6765__vivo__V2026__11__RP1A.200720.012__k65v1_64_bsp\

Done!
Elapsed: 00:12:04




Firnware Vivo 1929 Y1S PD2014F Scatter File | REPAIR DEAD BOOT

 NO SS

VIVO 1929 Y1S PD2014F_EX_A_1.13.7

Product Brand  : vivo
Product Device : k65v1_64_bsp
Product Model  : vivo 2015
Product Name   : full_k65v1_64_bsp
Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020 release-keys
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-06-01
Build Time     : 29.06.2021
Product Info   : k65v1_64_bsp
Product Board  : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo
vivo 1929 Y1S PD2014F_EX_A_1.13.7
MT6765__vivo__vivo_2015__10__QP1A.190711.020__k65v1_64_bsp

 

Bahan :
1. Download ROM Firmware Vivo 1929 Y1S PD2014F Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 



 Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 7C6234D59C4741410445F218D05D8139
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : EBAA54A4DBAED33F1D64106043570FEE0DFC750B21F9487B41F000DB6E8323DE
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k65v1_64_bsp.bin
     EMI : CNT : 0005
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 1501003458364B4D4209C2A2CE587747
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 3458364B4D42
        EMMC: VEN : SAMSUNG : 4X6KMB
        EMMC: SNN : 3265449560 ( 0xC2A2CE58) , MF : 7/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : F7D24F68352B595347881DB53D073B79

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : vivo
Product Device : k65v1_64_bsp
Product Model  : vivo 2015
Product Name   : full_k65v1_64_bsp
Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020 release-keys
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-06-01
Build Time     : 29.06.2021
Product Info   : k65v1_64_bsp
Product Board  : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo

MT6765__vivo__vivo_2015__10__QP1A.190711.020__k65v1_64_bsp

Read : preloader.bin
Read : recovery.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : backup.img
Read : survival.img
Read : reserved.img
Read : cust.img
ExtSparse : Compression ratio : 93%
Read : vgc.img
ExtSparse : Compression ratio : 99%
Read : persist.img
ExtSparse : Compression ratio : 68%
Read : proinfo.img
Read : efuse.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 18%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.02 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\vivo\vivo 1929 Y1S\MT6765__vivo__vivo_2015__10__QP1A.190711.020__k65v1_64_bsp\

Done!

 


Selasa, 04 Januari 2022

Firmware Vivo V23e V2116 PD2150F Scatter File / Flashtool | REPAIR DEAD BOOT| Vivo_V23E_MT6781__vivo__V2116__11__RP1A.200720.012__k6781v1_64

 

Vivo V23e V2116 PD2150F

Product Brand  : vivo
Product Device : 2116
Product Model  : V2116
Product Name   : 2116
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012 release-keys
Product Info   : k6781v1_64
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-09-01
Build Time     : 20.10.2021
Product Board  : k6781v1_64
Board Platform : mt6781
Product Manfct : vivo
Vivo V23e V2116 PD2150F
MT6781__vivo__V2116__11__RP1A.200720.012__k6781v1_64

 

Bahan :
1. Download ROM Firmware Vivo V23e V2116 PD2150F Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Hapus Demo Vivo V23E V2116

 NOTE :

 boot vol + /-

 

 





Operation : Read Firmware Vivo V23e V2116 Scatter File
ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6781 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Lagrange
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 2DC253E84A6E479074B6ACFC881D299E
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : EA532F9AA11752C0C35511A6B8939E9A5C4D9CD8CA4976716ACEA23D4755DA94
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6781
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k6781v1_64.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00060000 [ 384.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: CE014B4D3856393030314A4D2D423831
        UFS:
             VEN  : 0x01CE
             VID  : KM8V9001JM-B81
             IFW  : 0100
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCAC00000 [ 119.17 GB ]
             FSN  : 55e9a815cd33
             REG  : 0x101010000

        CHIP : MT6781 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 374708FFF7719DD5979EC875D56CD228

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : vivo
Product Device : 2116
Product Model  : V2116
Product Name   : 2116
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012 release-keys
Product Info   : k6781v1_64
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-09-01
Build Time     : 20.10.2021
Product Board  : k6781v1_64
Board Platform : mt6781
Product Manfct : vivo

MT6781__vivo__V2116__11__RP1A.200720.012__k6781v1_64

Read : preloader.bin
Read : recovery.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : backup.img
Read : reserved.img
Read : vbmeta_oem.img
Read : vbmeta_vgc.img
Read : factory.img
ExtSparse : Compression ratio : 85%
Read : storage.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : proinfo.img
Read : efuse.img
Read : nvram.bin
Read : md1rom.img
Read : spmfw.img
Read : audio_dsp.img
Read : pi_img.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 50%
Read : cache.img
Read : userdata.img

FW Size  : 7.02 GB
Android Info saved : _Android_info.txt
Scatter  : MT6781_Android_scatter.txt
Saved to : D:\vivo\v23e\MT6781__vivo__V2116__11__RP1A.200720.012__k6781v1_64\

Done!
Elapsed: 00:23:01

 


 

 

REMOVE / UNLOCK / Hapus Demo Vivo V23E V2116

 

 


 UNLOCK DEMO  Vivo V23E V2116 Tanpa BOX

Bahan :

1. Download TOOL UNLOCK DEMO  Vivo V23E V2116
2. Driver bila belum punya instal dulu driver mtknya disini

3. Flashtool  SP_Flash_Tool_v5.2136_Win

4. BYPASS AUTH / DISABLE AUTH
5. Konfirmasi pass sms / wa only 0822-1163-1565 , Mahar SHOPEE PAY / GOPAY 20k

Firmware Vivo V23e V2116 Scatter File

Cara Kerja :

Lihat video

done

 

 


 


Minggu, 02 Januari 2022

Firmware Infinix X657B Smart 5 | MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B

 


Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

 

Bahan :
1. Download ROM Firmware Infinix X657B SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-


 

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 9E379253896D0E62883C5030B80DF3B8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA37166FA857A38B35ED1992D66CFB88D208EB05A3CCE2A9F845DABD87AC04DD
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 700100443236303332102E097FDAC7CF
        EMMC: VEN : KINGSTON : OEM : 0 : ID : 443236303332
        EMMC: VEN : KINGSTON : D26032
        EMMC: SNN : 772374490 ( 0x2E097FDA) , MF : 12/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x750000000 [ 29.25 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED4F09CDD019FF2FAEDBD75E63C000D3

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 17%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.87 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\X657B\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117\

Done!
Elapsed: 00:06:42

 


 

Sabtu, 01 Januari 2022

Firmware Oppo A11K CPH2071 Scatter File | OPPO_A11K_CPH2071_MT6765__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011

NO SS


Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-07-05
Product Manfct : OPPO
Build Time     : 01.07.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.59_0590_202107012325
Display ID     : CPH2083EX_11_A.59
Display ID     : CPH2083EX_11_A.59_210701
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083

Bahan :
1. Download ROM Firmware Oppo A11K CPH2071 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-


Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 2C1117FDAA073A108524769B16B5F6D0
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 12D10C70EAC403BF3E84873D4FB769D3089BCC14B4B8D435372A13ED75E786E8
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19451.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 1501003458364B4D42032A95CA908783
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 3458364B4D42
        EMMC: VEN : SAMSUNG : 4X6KMB
        EMMC: SNN : 714459792 ( 0x2A95CA90) , MF : 8/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : CED260663574BE2FD3BDB2A1809A079F

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-07-05
Product Manfct : OPPO
Build Time     : 01.07.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.59_0590_202107012325
Display ID     : CPH2083EX_11_A.59
Display ID     : CPH2083EX_11_A.59_210701
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 74%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 28%
Read : system.img
ExtSparse : Compression ratio : 25%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo a11k cph2083 menu cph2071\MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083\

Done!
Elapsed: 00:14:23




Firmware Oppo A12 CPH2083 Scatter File | OPPO_A12_MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

 



Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 09.11.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.65_0650_202111091923
Display ID     : CPH2083EX_11_A.65
Display ID     : CPH2083EX_11_A.65_211109
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

Bahan :
1. Download ROM Firmware Oppo A12 CPH2083 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 


Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 957F16CB437410A86C0F670E83CE2ED9
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 46FA856F59FCF471DC94D696E94B75391DCD79B5329AD327F46397028D39C360
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19451.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68423861503E032047D8EA37B1
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 541579498 ( 0x2047D8EA) , MF : 3/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 1B4EF74BA222E12F363B1961D715FB01

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 09.11.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.65_0650_202111091923
Display ID     : CPH2083EX_11_A.65
Display ID     : CPH2083EX_11_A.65_211109
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 68%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 28%
Read : system.img
ExtSparse : Compression ratio : 25%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.59 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo A12 CPH2083\MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083\

Done!
Elapsed: 00:13:30