Kangsuper

Jumat, 30 April 2021

Firmware & Flash Wearnes ZeusPhone ZP-452

Brand     : K450
ProdName : ZP_452
ProdModel : ZeusPhone ZP-452
Device    : ZP_452
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10
preloader_rjk301_w_k450_zp_82.bin

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-452 Scatter File

MT6582__K450__ZeusPhone_ZP-452__ZP_452__4.4.2__ALPS.KK1.MP1.V2.10

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Log read firmware Wearnes ZeusPhone ZP-452

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201CBC9CE12919D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201CBC9CE12919D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD82173AE34844DDA0025F5A71
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : K450
ProdName : ZP_452
ProdModel : ZeusPhone ZP-452
Device    : ZP_452
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_rjk301_w_k450_zp_82.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / rjk301_w_k450_zp_82 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 949 MiB
Scatter saved to : D:\ANDROID LAIN2\Wearnes\ZeusPhone_ZP-452\MT6582__K450__ZeusPhone_ZP-452__ZP_452__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Firmware & Flash Wearnes ZeusPhone ZP-541

Brand     : Wearnes
ProdName : ZeusPhone ZP-541
ProdModel : ZeusPhone ZP-541
Device    : ZeusPhone ZP-541
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ZP-541_1.0_4.4.2_20150602

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-541 Scatter File

Download Rom MT6582__Wearnes__ZeusPhone_ZP-541__ZeusPhone_ZP-541__4.4.2__ZP-541_1.0_4.4.2_20150602

Log read firmware Wearnes ZeusPhone ZP-541

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 89 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507AB72E85F324B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507AB72E85F324B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDF9A94BB2C05113A7D812DBE4
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Wearnes
ProdName : ZeusPhone ZP-541
ProdModel : ZeusPhone ZP-541
Device    : ZeusPhone ZP-541
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ZP-541_1.0_4.4.2_20150602

[Read Ok] : preloader_hexing82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hexing82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 955 MiB
Scatter saved to : D:\ANDROID LAIN2\Wearnes\ZeusPhone ZP-541\MT6582__Wearnes__ZeusPhone_ZP-541__ZeusPhone_ZP-541__4.4.2__ZP-541_1.0_4.4.2_20150602\

All done!

Rabu, 24 Maret 2021

Firmware & Flash Evercoss M55A ~ SP9836A ~ Via Infinity CM2 ONLY !!!

NO SS

Patch Level    : OPM2.171019.012
Display ID     : EVERCOSS_M55A_V11_8.1_09012019
Ver. Incmt     : 090119
Ver. CodeName : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-12-05
Build Time     : 08.01.2019
Product Model : M55A
Product Brand : EVERCOSS
Product Name   : M55A
Product Device : M55A
Product Manfct : EVERCOSS
Product Info   : M55A
Product Board : sp9863a_1h10
Board Platform : sp9863a

AndroidVer : 8
VlnrLevel : 0x02

SP9863A__EVERCOSS__M55A__8.1.0__EVERCOSS_M55A_V11_8.1_09012019__OPM2.171019.012__M55A

Bahan :
1. Download ROM Firmware Flash Evercoss M55A

2. File only tested via CM2 SPD v211

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

-BOOT VOLUME +

Log Read Firmware Evercoss M55A

Operation : Read FW [ v2.11 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : OPM2.171019.012
Display ID     : EVERCOSS_M55A_V11_8.1_09012019
Ver. Incmt     : 090119
Ver. CodeName : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-12-05
Build Time     : 08.01.2019
Product Model : M55A
Product Brand : EVERCOSS
Product Name   : M55A
Product Device : M55A
Product Manfct : EVERCOSS
Product Info   : M55A
Product Board : sp9863a_1h10
Board Platform : sp9863a

AndroidVer : 8
VlnrLevel : 0x02

SP9863A__EVERCOSS__M55A__8.1.0__EVERCOSS_M55A_V11_8.1_09012019__OPM2.171019.012__M55A

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : deltanv_l.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
ExtSparse : Compression ratio : 92%
Read : vendor.img
ExtSparse : Compression ratio : 83%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 38%
Read : phase.cfg
Read : u-boot-spl.bin

Firmware size : 0xCB6EB604 ( 3.18 GiB )
Android Info saved : _Android_info.txt

Kamis, 18 Februari 2021

Firmware & Flash STRAWBERRY SX ~ SPD SC9832E ~ via CM2 ONLY

NO SS

Patch Level    : OPM2.171019.012
Display ID     : sn15_SX_v07_20181227
Ver. Incmt     : 44415
Ver. CodeName : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 27.12.2018
Product Model : Strawberry SX
Product Brand : Strawberry
Product Name   : SX
Product Device : SX
Product Manfct : Strawberry
Product Info   : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e

Bahan :
1. Download ROM Firmware Flash STRAWBERRY SX

2. File only tested via CM2 SPD v211

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Log FLASH STRAWBERRY SX VIA INFINITY CM2 V211

Operation : Flash Firmware [ v2.11 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Skip update! Reason : FWRead has been not complete by user!

UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : ldsp_l.bin
CODE : gdsp_l.bin
CODE : modem_l.bin
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : pm_sys.bin
CODE : boot.img
CODE : recovery.img
FSIMG : persist.img
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : system.img
FSIMG : vendor.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
UBOOT : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:03:46

Selasa, 09 Februari 2021

Firmware Lenovo K320T PAC | SP9850KALENOVOK320t

Device info :
Patch Level    : NRD90M
Display ID     : K320t_S001_171027_CMCC
Ver. Incmt     : K320t_S001_171027_CMCC
Ver. CodeName : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1513940210
Product Model : Lenovo K320t
Product Brand : Lenovo
Product Name   : Lenovo_K320t
Product Device : Lenovo_K320t
Product Board : L505
Board Platform : sp9850ka
Product Info   : sp9850ka_2c20
Product Manfct : LENOVO

Bahan :
1. Download ROM Firmware Lenovo K320T PAC, ROM TANPA BAHASA INDONESIA

Download Rom Firmware Firmware Lenovo K320T PAC lenovo_k320t_s040_s001_171027CMCC

2. File only tested via CM2 SPD v205 , belum test via RSD

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Cara flash:

- LIHAT VIDEO GAN, BIAR SINYAL & IMEI tidak HILANG

-Tested juga buat Display ID : K320t_S006_180706_ROW

Cara Flash Lenovo K320T via cm2

Log Flash Lenovo K320T via cm2

Operation : Flash Firmware [ v2.05 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : lenovo_k320t_s040.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x1E
PMTMng : Update PMT Ok!

CODE : boot-sign.img
CODE : recovery-sign.img
FSIMG : sysinfo.img
FSIMG : system.img
FSIMG : userdata.img
CODE : sprd_720p_180_180.bmp
CODE : sprd_720p_180_180.bmp
FSIMG : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
CODE : tos-sign.bin
CODE : sml-sign.bin
FSIMG : persist.img
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:04:52

Jumat, 15 Januari 2021

Firmware CLONE Samsung G920F (HDC) | MT6582 FAKE | preloader_hedy72_w_kk.bin MT6572

Brand     : Samsung
ProdName : Lite
ProdModel : SM-G920F (HDC)
Device    : HDC
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : HDC.KK1.MP7.V1.22

preloader_hedy72_w_kk.bin

Bahan :
1. Download ROM Firmware CLONE Samsung G920F (HDC) Scatter File

Download Rom MT6582__Samsung__SM-G920F_(HDC)__HDC__5.0.2__HDC.KK1.MP7.V1.22

Read Firmware Flash Copy Samsung G920F (HDC)

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473AF00A23CD5263
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473AF00A23CD5263
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD2B0B4087F9563E30BE7DC92E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Samsung
ProdName : Lite
ProdModel : SM-G920F (HDC)
Device    : HDC
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : HDC.KK1.MP7.V1.22

[Read Ok] : preloader_hedy72_w_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hedy72_w_kk / EMMC
Android Info saved
HWConfig Info saved
FW Size : 824 MiB
Scatter saved to : D:\ANDROID LAIN2\samsung\New folder\MT6582__Samsung__SM-G920F_(HDC)__HDC__5.0.2__HDC.KK1.MP7.V1.22\

All done!

Jumat, 01 Januari 2021

Firmware & Flash HI CORE LENS DC1 | MT6580

Patch Level    : LMY47I
Display ID     : ALF_S4507_WZ_V195B-B_Lens DC1_V1.0.1_20160606
Ver. CodeName : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-03-01
Build Time     : 06.06.2016
Product Model : Lens DC1
Product Brand : alps
Product Name   : full_magc6580_we_l
Product Device : magc6580_we_l
Product Manfct : alps
Board Platform : mt6580
Product Info   : magc6580_we_l

Bahan :
1. Download ROM Firmware HI CORE LENS DC1 Scatter File

Download Rom MT6580__alps__Lens_DC1__5.1__ALF_S4507_WZ_V195B-B_Lens_DC1_V1.0.1_20160606__LMY47I__magc6580_we_l

Read Firmware Flash HI CORE LENS DC1 | MT6580

Log read firmware

Operation : Read Firmware [ v2.16 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 44000145313031532DA801360B33B04D
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 45010044533130313601A82D4DB0330B
        EMMC: VEN : SANDISK | OEM : 01 | DEV : DS1016
        EMMC:
              BOOT1 : 0x00400000 [ 4.00 MB ]
              BOOT2 : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : BB86D488D289AEEF5442AA617CF32E5

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : LMY47I
Display ID     : ALF_S4507_WZ_V195B-B_Lens DC1_V1.0.1_20160606
Ver. CodeName : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-03-01
Build Time     : 06.06.2016
Product Model : Lens DC1
Product Brand : alps
Product Name   : full_magc6580_we_l
Product Device : magc6580_we_l
Product Manfct : alps
Board Platform : mt6580
Product Info   : magc6580_we_l

MT6580__alps__Lens_DC1__5.1__ALF_S4507_WZ_V195B-B_Lens_DC1_V1.0.1_20160606__LMY47I__magc6580_we_l

Read : preloader.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img

FW Size : 1.80 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\hi core\New folder (2)\MT6580__alps__Lens_DC1__5.1__ALF_S4507_WZ_V195B-B_Lens_DC1_V1.0.1_20160606__LMY47I__magc6580_we_l\

Done!