kangsuper

Rabu, 30 September 2020

Download FIRMWARE SONY SETOOL BOX / FUSION BOX

 FIRMWARE SONY SETOOL BOX / FUSION BOX

Firmware hanya buat box fusion/setool

Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 

502SO

A.

B.

C.

D.

E.

F.

G.

H.

I.

J.

K.

L.

M.

N.

O.

P.

Q.

 

R. 

Selasa, 22 September 2020

Firmware File Meizu M6 Scatter File

 no ss

 

Patch Level    : NRD90M
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2019-03-01
Build Time     : 1554686821
Board Platform : mt6750
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 7.1.2.0G
Product Model  : MEIZU M6
Product Name   : meizu_M6
Product Device : meizu_M6
Product Board  : M6
Product Info   : M6

 

 

Bahan :
1. Download Firmware Meizu M6 Scatter File

2. Tested Via CM2, SP-Flash-Tool blm test Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 

 

 Log Read Firmware Meizu M6 Scatter File

 Operation : Read Firmware [ v2.10 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
MODE : Meizu : M3s_M5n_U10 | Manual : Disabled
BROM : Change Configuration settings for target
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 450100444634303136016A2ECD3B94A7
        EMMC: VEN : SANDISK | OEM : 01 | DEV : DF4016
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 7BFF3278592F530122760C5A1B965EFE

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : NRD90M
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2019-03-01
Build Time     : 1554686821
Board Platform : mt6750
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 7.1.2.0G
Product Model  : MEIZU M6
Product Name   : meizu_M6
Product Device : meizu_M6
Product Board  : M6
Product Info   : M6

MT6750__Meizu__MEIZU_M6__7.0__Flyme_7.1.2.0G__NRD90M__M6

Read : preloader.bin
Read : recovery.img
Read : custom.img
ExtSparse : Compression ratio : 96%
Read : proinfo.img
Read : devinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 11%
Read : cache.img
Read : userdata.img

FW Size  : 2.37 GB
Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : F:\meizu\m6 m711h\meizu m6\MT6750__Meizu__MEIZU_M6__7.0__Flyme_7.1.2.0G__NRD90M__M6\

 


Firmware Wiko TOMMY 3 Android 7 & 8

 

 

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

 

Bahan :
1. Download Firmware Wiko TOMMY 3   Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 


 

Operation : Read Firmware Wiko TOMMY 3
ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
BROM : SOCID : C3938EA812AC5827BB680B6D94C6BEA4738886B3148C5C69E46DEA5371E1FF73
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: 150100464536324D420365ADF2EB8521
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : A89DCC1BDB59F641EDD63BCB719C87E3

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

MT6739__TINNO__K600AG__8.1.0__O11019__k600_go

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : misc.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 21%
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 1.41 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\wiko\tommy 3\MT6739__TINNO__K600AG__8.1.0__O11019__k600_go\

 


 

Selasa, 15 September 2020

Firmware & Flash UNIHERTZ JELLY PRO Android 7.0

 


Brand     : Unihertz
ProdName  : Jelly-Pro
ProdModel : Jelly-Pro
Device    : Jelly-Pro
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.19_even6737m.65.n

Bahan :
1. Download UNIHERTZ JELLY PRO  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Log Read Firmware UNIHERTZ JELLY PRO

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4400014531303446230A01369DCA2ACB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6104F
[eMMC] : FLASH_CID : 450100444634303136010A23CB2A449D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD8077334C7293DA9199CF0BF1
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Unihertz
ProdName  : Jelly-Pro
ProdModel : Jelly-Pro
Device    : Jelly-Pro
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.19_even6737m.65.n

[Read Ok] : preloader_c223v37m_dfl.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / c223v37m_dfl / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3488 MiB
Scatter saved to : D:\ANDROID LAIN2\jelly pro\MT6737M__Unihertz__Jelly-Pro__Jelly-Pro__7.0__alps-mp-n0.mp1-V1.19_even6737m.65.n\

All done!




Senin, 07 September 2020

Firmware & NVRAM Infinix X650C via BEST CM2

 


Patch Level    : PPR1.180610.011
Display ID     : X650C-H626DEJ-P-191226V271
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-01-05
Build Time     : 26.12.2019
Product Model  : Infinix X650C
Product Brand  : Infinix
Product Name   : H626
Product Device : Infinix-X650C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x650c_h626
Product Board  : Infinix-X650C
Board Platform : mt6765
INFINIX-Hot-8-X650C-H626DEJ-P-200917V304
MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X650C__9__X650C-H626DEJ-P-191226V271__PPR1.180610.011__x650c_h626

Bahan :
1. Download Firmware & NVRAM Infinix X650C via BEST CM2

2. TOOL pake INFINITY CM2
3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k


Read Firmware  Infinix X650C 

INFINIX-Hot-8-X650C-H626DEJ-P-200917V304

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.15

Load IDBase v729152 Ok!


Operation : Read Firmware [ v2.15 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
BROM : SOCID : 7427452E22DFF44A0FE240784F47C29095805DC893BFDCAF78A47DA8200C3DB4
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: 150100444436384D42020E0DC484854B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DD68MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 5ED4628D30F775C8B2EA2A8E581D55B8

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Display ID     : X650C-H626DEJ-P-191226V271
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-01-05
Build Time     : 26.12.2019
Product Model  : Infinix X650C
Product Brand  : Infinix
Product Name   : H626
Product Device : Infinix-X650C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x650c_h626
Product Board  : Infinix-X650C
Board Platform : mt6765

MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X650C__9__X650C-H626DEJ-P-191226V271__PPR1.180610.011__x650c_h626

Read : preloader.bin
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : tinysys-sspm.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 43%
Read : system.img
ExtSparse : Compression ratio : 17%
Read : vbmeta.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : cache.img
Read : recovery.img
Read : tkv.img
Read : proinfo.img
Read : tranfs.img
Read : userdata.img

FW Size  : 3.93 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\infinix\X650c\MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X650C__9__X650C-H626DEJ-P-191226V271__PPR1.180610.011__x650c_h626\

Done!
Elapsed: 00:07:59