kangsuper

Kamis, 26 November 2020

Firmware Polytron P551S | Scatter File MT6753

 NO SS, CEK LOG


Patch Level    : O11019
Display ID     : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 02.11.2018
Product Model  : P551S
Product Brand  : Polytron
Product Name   : P551S
Product Device : P551S
Product Board  : mt6753
Product Manfct : Polytron
Product Info   : POLYTRON_P551S
Product Board  : k53v1_bsp
Board Platform : mt6753

Bahan :
1. Download Firmware Polytron P551S scatter file

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k




LOG READ FIRMWARE Polytron P551S

Operation : Read Firmware [ v2.16 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 90014A484247346132A56100409725FB
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 90014A484247346132A56100409715FB
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 826B25E7283A32364E00D12D925197CE

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 02.11.2018
Product Model  : P551S
Product Brand  : Polytron
Product Name   : P551S
Product Device : P551S
Product Board  : mt6753
Product Manfct : Polytron
Product Info   : POLYTRON_P551S
Product Board  : k53v1_bsp
Board Platform : mt6753

MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 41%
Read : cache.img
Read : userdata.img

FW Size  : 1.70 GB
Android Info saved : _Android_info.txt
Scatter  : MT6753_Android_scatter.txt
Saved to : E:\polytron\polytron p551s\MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S\

Done!
Elapsed: 00:07:55




Flash BlackBerry Aurora BBC100-1 | 1 Klick Flash Sangat Mudah

 
 
 
 FASTBOOT VOL DOWN + ON

Bahan :
1. Download ROM Firmware  BlackBerry Aurora BBC100-1,

2. Untuk tutorial silahkan lihat video dibawah

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE:

  • FASTBOOT VOL DOWN + ON

CARA FLASH  BlackBerry Aurora BBC100-1

1. masuk fastboot vol- on

2. klik unlock oem.bat

BB akan red blinking tunggu sampe msk fastboot lg
lanjutkan

3. flash all.bat

4. done

 





Kamis, 19 November 2020

Firmware iPhone 8+ Clone/Copy | MT6737__iPhone__8_Plus__iPhone__6.0__alps-mp-m0.mp1-V2.115_zechin6735m.35.m0_P45

 


platform: MT6737, cpu abi: armeabi-v7a
manufacturer: iPhone
board: , name: iPhone
brand: iPhone, model: 8_Plus
build id: MRA58K, version: 6.0 Marshmallow (MRA58K test-keys)
build description: full_zechin6735m_35_m0-user 6.0 MRA58K 1513039956 test-keys
build version: alps-mp-m0.mp1-V2.115_zechin6735m.35.m0_P45
screen resolution: 1280 x 720
main camera: imx237_mipi_raw imx149_mipi_raw
 lens: dw9714af dw9761_bu64241af
front camera: imx190_mipi_raw gc2035_s89_mipi_yuv ov9760_mipi_raw ov9762_mipi_raw
audio: amp_6323pmic_spk
touch: ft5x0x
modem: s89_lwgip

Brand     : iPhone
ProdName  : iPhone
ProdModel : 8_Plus
Device    : iPhone
AndroidVer: 6.0
MTKxCPU   : MT6737
MTKxPRJ   : alps-mp-m0.mp1-V2.115_zechin6735m.35.m0_P45
zechin6735m

Bahan :
1. Download ROM Firmware iPhone 8+ Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

Log Read Firmware Firmware iPhone 8+   Scatter File

 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB

cable...
 Hold the VOL DOWN to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM6)
 Connection status: EHCI:HUB:HUB:USB 2.0 Low-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6735M_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 1 GiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: K7XVMB (0x4b3758564d42), rev: 0x01, serial number: 0x165CD878
Manufacturing date: Mar 2014
CID: 1501004B 3758564D 4201165C D8783167
Capacity: 7.29 GiB(7,827,095,552 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 512 KiB
 User area: 7.28 GiB(7,818,182,656 bytes)
USB speed: High-Speed
platform: MT6737, cpu abi: armeabi-v7a
manufacturer: iPhone
board: , name: iPhone
brand: iPhone, model: 8_Plus
build id: MRA58K, version: 6.0 Marshmallow (MRA58K test-keys)
build description: full_zechin6735m_35_m0-user 6.0 MRA58K 1513039956 test-keys
build version: alps-mp-m0.mp1-V2.115_zechin6735m.35.m0_P45
screen resolution: 1280 x 720
main camera: imx237_mipi_raw imx149_mipi_raw
 lens: dw9714af dw9761_bu64241af
front camera: imx190_mipi_raw gc2035_s89_mipi_yuv ov9760_mipi_raw ov9762_mipi_raw
audio: amp_6323pmic_spk
touch: ft5x0x
modem: s89_lwg
crypto state: encrypted
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB

cable...
 Hold the VOL DOWN to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM6)
 Connection status: EHCI:HUB:HUB:USB 2.0 Low-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6735M_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 1 GiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: K7XVMB (0x4b3758564d42), rev: 0x01, serial number: 0x165CD878
Manufacturing date: Mar 2014
CID: 1501004B 3758564D 4201165C D8783167
Capacity: 7.29 GiB(7,827,095,552 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 512 KiB
 User area: 7.28 GiB(7,818,182,656 bytes)
USB speed: High-Speed
platform: MT6737, cpu abi: armeabi-v7a
manufacturer: iPhone
board: , name: iPhone
brand: iPhone, model: 8_Plus
build id: MRA58K, version: 6.0 Marshmallow (MRA58K test-keys)
build description: full_zechin6735m_35_m0-user 6.0 MRA58K 1513039956 test-keys
build version: alps-mp-m0.mp1-V2.115_zechin6735m.35.m0_P45
screen resolution: 1280 x 720
main camera: imx237_mipi_raw imx149_mipi_raw
 lens: dw9714af dw9761_bu64241af
front camera: imx190_mipi_raw gc2035_s89_mipi_yuv ov9760_mipi_raw ov9762_mipi_raw
audio: amp_6323pmic_spk
touch: ft5x0x
modem: s89_lwg
crypto state: encrypted
Reading preloader_zechin6735m_35_m0.bin... Done.
Reading pgpt... Done.
Reading proinfo.bin... Done.
Reading nvram... Done.
Reading protect1... Done.
Reading protect2... Done.
Reading lk.bin... Done.
Reading para... Done.
Reading boot.img... Done.
Reading recovery.img... Done.
Reading logo.bin... Done.
Reading expdb... Done.
Reading seccfg... Done.
Reading oemkeystore... Done.
Reading secro.img... Done.
Reading keystore... Done.
Reading trustzone1.bin... Done.
Reading trustzone2.bin... Done.
Reading frp... Done.
Reading nvdata... Done.
Reading metadata... Done.
Reading system.img... Done.
Reading cache.img... Done.
Reading userdata.img... Done.
Reading flashinfo... Done.
Files saved to \\%BACKUPS%\Xiaomi\Redmi%20S2,Redmi%20Y2(ysl)\MRA58K%20test-keys\iphone

%208%20plus%20copy\
Completed in 14 mins 56.950 s

 


 

Rabu, 18 November 2020

Flash & Firmware X27 | MT6572__alps__X27__x6_v5_x50__4.4.2__HY_W116_W17_3G_X27

 

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : X27
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_W17_3G_X27


Bahan :
1. Download ROM Firmware X27  Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

 

UNTUK X27 PLUS DISINI  https://kangsuper.blogspot.com/2020/12/flash-firmware-x27-plus-x-series-fake.html

 Cara Flash X27 XSERIES


Log Read Firmware Firmware X27  Scatter File

 Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D00DD2722E25FED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00DD2722E25FED
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA93155677318E814A961152C8FEF4D9A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : X27
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_W17_3G_X27

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 808 MiB
Scatter saved to : D:\New folder\New folder (5)\MT6572__alps__X27__x6_v5_x50__4.4.2__HY_W116_W17_3G_X27\

All done!

 


 

Jumat, 13 November 2020

Firmware RINO 3 PRO | RINO 3 | MTK6763 FAKE | MT6572 SCATER FILE

 

platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: x6_v5_x50, name: x6_v5_x50
brand: alps, model: rino3 pro()
build id: KOT49H, version: 4.4.2 Lollipop (HY_W116_M403_Z)
build description: x6_v5_x50-user 4.4.2 KOT49H eng.jjx.1594700373 test-keys
build version: HY_W116_M403_Z
lcd: st7701s_fwvga_dsi_vdo_w101v30 st7701_fwvga_dsi_vdo_cmi5012
screen resolution: 960 x 480
main camera: ov3660_yuv_w116_w7
 lens: sensordrive
front camera: ov3660sub_yuv_w116_w7
audio: amp_6323pmic_spk
touch: ft5206_qhd_notouch
modem: mbk72_wet_jb3_hspa_850

RINO 3 FILE SAMA RINO 3 PRO

FLASH SYSTEM,USERDATA,CACHE DULU SAJA


Bahan :
1. Download ROM RINO 3 PRO atau RINO 3  Scatter File, Silahkan coba yg paling cocok untuk RINO anda

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

NOTE :

  • Pake yg ke 3 joss _ RINO_3_PRO_MT6572_preloader_x6_v5_x50_ok_3
  • Untuk file rino ke2, install back button
  •  NOTE :

    1. BACKUP

    2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

    KLO GAK BISA BARU FLASH FULL

 

Log Read Firmware RINO 3 PRO via UFI

Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Hold the VOL UP to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM5)
 Connection status: EHCI:HUB:HUB:USB 2.0 Low-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: SJS00M (0x534a5330304d), rev: 0x00, serial number: 0x77EF708C
Manufacturing date: Jun 2012
CID: 15010053 4A533030 4D0077EF 708C6FE1
Capacity: 3.64 GiB(3,911,319,552 bytes)
 Boot1: 1024 KiB
 Boot2: 1024 KiB
 RPMB: 128 KiB
 User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: x6_v5_x50, name: x6_v5_x50
brand: alps, model: rino3 pro()
build id: KOT49H, version: 4.4.2 Lollipop (HY_W116_M403_Z)
build description: x6_v5_x50-user 4.4.2 KOT49H eng.jjx.1594700373 test-keys
build version: HY_W116_M403_Z
lcd: st7701s_fwvga_dsi_vdo_w101v30 st7701_fwvga_dsi_vdo_cmi5012
screen resolution: 960 x 480
main camera: ov3660_yuv_w116_w7
 lens: sensordrive
front camera: ov3660sub_yuv_w116_w7
audio: amp_6323pmic_spk
touch: ft5206_qhd_notouch
modem: mbk72_wet_jb3_hspa_850
Model: Oppo AX7 Pro
AUTH info: MTK, version: 1
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Hold the VOL UP to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM5)
 Connection status: EHCI:HUB:HUB:USB 2.0 Low-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: SJS00M (0x534a5330304d), rev: 0x00, serial number: 0x77EF708C
Manufacturing date: Jun 2012
CID: 15010053 4A533030 4D0077EF 708C6FE1
Capacity: 3.64 GiB(3,911,319,552 bytes)
 Boot1: 1024 KiB
 Boot2: 1024 KiB
 RPMB: 128 KiB
 User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: x6_v5_x50, name: x6_v5_x50
brand: alps, model: rino3 pro()
build id: KOT49H, version: 4.4.2 Lollipop (HY_W116_M403_Z)
build description: x6_v5_x50-user 4.4.2 KOT49H eng.jjx.1594700373 test-keys
build version: HY_W116_M403_Z
lcd: st7701s_fwvga_dsi_vdo_w101v30 st7701_fwvga_dsi_vdo_cmi5012
screen resolution: 960 x 480
main camera: ov3660_yuv_w116_w7
 lens: sensordrive
front camera: ov3660sub_yuv_w116_w7
audio: amp_6323pmic_spk
touch: ft5206_qhd_notouch
modem: mbk72_wet_jb3_hspa_850
Reading preloader_x6_v5_x50.bin... Done.
Reading mbr... Done.
Reading ebr1... Done.
Reading pro_info... Done.
Reading nvram... Done.
Reading protect_f... Done.
Reading protect_s... Done.
Reading seccfg... Done.
Reading uboot.bin... Done.
Reading bootimg.img... Done.
Reading recovery.img... Done.
Reading sec_ro.img... Done.
Reading misc... Done.
Reading logo.bin... Done.
Reading expdb... Done.
Reading android.img... Done.
Reading cache.img... Done.
Reading usrdata.img... Done.
Reading fat.img... Done.
Files saved to \\D:\New%20folder\New%20folder%20(3)\
Completed in 12 mins 5.813 s





Senin, 09 November 2020

FIRMWARE SM-J7 PRO CLONE/COPY | MT6580__Samsung__SM-J7_pro__SM-J7_pro__6.0__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

 

Brand     : Samsung
ProdName  : SM-J7 pro
ProdModel : SM-J7 pro
Device    : SM-J7 pro
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

preloader_aeon6580_weg_l_l19

Bahan :
1. Download ROM SAMSUNG SM-J7 PRO CLONE/COPY  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

 

 Untuk SM-J7 CORE Kesini https://kangsuper.blogspot.com/2020/11/firmware-j7-core-clonecopy.html

Log Read Info SM-J7 PRO CLONE/COPY

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034474530018F6235ED12CB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 110100303034474530018F6235ED12CB
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xA93155671CF68A2E868639B4BF0AA439
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Samsung
ProdName  : SM-J7 pro
ProdModel : SM-J7 pro
Device    : SM-J7 pro
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

SECURITY :
IMEI_SW [1] : 35302707cccccc
IMEI_SW [2] : 35302707xccccc
BTMAC Addr  : BE8F4665803C
WiFi MAC    : E8D541A78A38

MODEM :
BaseBand  : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P11_1_2g_n

EXTRA :
LCD [0] : STOM_KERNEL_LCM=ili9807_qhd_dsi_vdo_ivo_546_hanlong_lyx
LCD [1] : jd9261_qhd_dsi_vdo_ivoips_55_qicai_lyx
LCD [2] : jd9522z_qhd_dsi2l_vdo_cm_ips_55_suojia_lyx_fhd
LCD Res : 960x540
TOUCH [0] : STOM_KERNEL_TOUCHPANEL=focaltech
CAM [0] : imx179_mipi_raw
MODEM : L19_b125_coclk_simhotplug L11_gprs_coclk_simhot
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!






FIRMWARE J7 CORE CLONE/COPY | MT6580__Samsung__SM-J7_Core__SM-J7_Core__7.0__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

 
Brand     : Samsung
ProdName  : SM-J7 Core
ProdModel : SM-J7 Core
Device    : SM-J7 Core
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
preloader_aeon6580_weg_l_l19

Bahan :
1. Download ROM SAMSUNG J7 CORE CLONE/COPY  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL


 Untuk J7 PRO KESINI Download ROM SAMSUNG SM-J7 PRO CLONE/COPY  Scatter File

Log Read Info FIRMWARE J7 CORE CLONE/COPY | MT6580__Samsung__SM-J7_Core__SM-J7_Core__7.0__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034474530018F6235ED12CB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 110100303034474530018F6235ED12CB
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xA93155671CF68A2E868639B4BF0AA439
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Samsung
ProdName  : SM-J7 Core
ProdModel : SM-J7 Core
Device    : SM-J7 Core
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

preloader_aeon6580_weg_l_l19

SECURITY :
BTMAC Addr  : 000046658001
WiFi MAC    : E8D541A78A38

MODEM :
BaseBand  : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P11_1_2g_n

EXTRA :
LCD [0] : STOM_KERNEL_LCM=ili9807_qhd_dsi_vdo_ivo_546_hanlong_lyx
LCD [1] : jd9261_qhd_dsi_vdo_ivoips_55_qicai_lyx
LCD [2] : jd9522z_qhd_dsi2l_vdo_cm_ips_55_suojia_lyx_fhd
LCD [3] : ili9885u_qhd_dsi_vdo_sharp_55_weisicheng_lyx
LCD Res : 960x540
TOUCH [0] : STOM_KERNEL_TOUCHPANEL=focaltech
CAM [0] : imx179_mipi_raw
MODEM : L19_b125_coclk_simhotplug L11_gprs_coclk_simhot
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

 


 

 

 

Minggu, 08 November 2020

Firmware SAMSUNG SM-G950 CLONE / COPY | MT6580__samsung__SM-G950__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

 NO SS LUPA BUAT Cek log read info aja

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G950
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

preloader_hct6580_weg_a_l.bin

Bahan :
1. Download ROM SAMSUNG SM-G950 CLONE  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL


Log Read Firmware Firmware SM-G950 CLONE / COPY | MT6580__samsung__SM-G950__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

 Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040503A221DE2243
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040503A221DE2243
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDD97B0EDCEB5BEA6C24995C4B
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G950
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
preloader_hct6580_weg_a_l.bin
SECURITY :
IMEI_SW [1] : 3553284fffff
IMEI_SW [2] : 3555325fffff
BTMAC Addr  : 044BFF32275A
WiFi MAC    : 044BFF5013DA

MODEM :
BaseBand  : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P8_1_wg_n

EXTRA :
LCD : Not info available :(
LCD Res : 1080x540
TOUCH [0] : ft5206
TOUCH [1] : gslX68X
CAM [0] : sp2509_mipi_raw
CAM [1] : gc2365mipi_raw
CAM [2] : gc2385mipi_raw
CAM [3] : a5142_mipi_raw
CAM [4] : gc5005mipi_raw
CAM [5] : gc5025mipi_raw
CAM [6] : gc8024mipi_raw
CAM [7] : imx219_mipi_raw
MODEM : hct6580_we_a_l_hspa hct6580_we_a_l_gprs
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:08