kangsuper

Senin, 28 Oktober 2019

BYPASS FRP & FLASH Advan i7U G711A_L68




FRP Advan i7u ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model  : i7U
Product Brand  : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board  : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10


A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware PAC_Advan i7U_BYPASS_FRP_only  atau  Download Disini (1MB)
 B. Firmware PAC FULL
  1. Download FULL PAC sp9850ka_1h10_Advan_i7U_SL718A_V1.0_20180508 atau Download disini


Tool :
  1. Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass WA / sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Cara Kerja :
  • Untuk FRP Evercoss Advan i7U tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+/-)

 Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : sp9850ka_1h10_Advan_i7U_BYPASS_FRP_LOCK.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model  : i7U
Product Brand  : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board  : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10




Done!
Elapsed: 00:06:31




Minggu, 27 Oktober 2019

Flash & Firmware Sharp Pi IF9007 MT6737

Patch Level    : NRD90M
Display ID     : 105D_00ID_A01
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-11-05
Build Time     : 1512996176
Product Model  : IF9007
Product Brand  : Sharp
Product Name   : IF9007_ID
Product Device : AG3
Product Manfct : FIH
Board Platform : mt6737m
Product Info   : AG3

Bahan :
1. Download Firmware

2. Download SP-Flash-Tool Wajib pake versi SP_Flash_Tool_v5.1824_Win Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass WA / sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k


NOTE :
  • cek versi, seri harware, backup dulu cocokkan, FLASH

Cara Flash Sharp Pi IF9007  via Flash Tool



Log Read Firmware Sharp Pi

Operation : Read Firmware [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 150100514531334D420DD40BB8CA326B
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100514531334D420DD40BB8CAC46B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE13MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D2F4E7E2D8A297FBEAE54C1A95CED57

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : NRD90M
Display ID     : 105D_00ID_A01
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-11-05
Build Time     : 1512996176
Product Model  : IF9007
Product Brand  : Sharp
Product Name   : IF9007_ID
Product Device : AG3
Product Manfct : FIH
Board Platform : mt6737m
Product Info   : AG3

MT6737M__FIH__IF9007__7.0__105D_00ID_A01__NRD90M__AG3


SecureDevice : Plain

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : teeinfo.img
Read : system.img
ExtSparse : Compression ratio : 21%
Read : cache.img
Read : userdata.img

FW Size  : 2.55 GB
Android Info saved : _Android_info.txt
Scatter  : MT6737_Android_scatter.txt
Saved to : F:\sharp\pi\New folder\MT6737M__FIH__IF9007__7.0__105D_00ID_A01__NRD90M__AG3\

Done!
Elapsed: 00:07:47


Jumat, 25 Oktober 2019

Firmware & Flash HYVE Pryme 01 ~scatter file




Brand     : Hyve
ProdName  : pryme01
ProdModel : Pryme 01
Device    : pryme01
AndroidVer: 6.0
MTKxCPU   : MT6797
MTKxPRJ   : alps-mp-m0.mp9-V1.33_wtk6797.5u

Bahan :
1. Download Firmware

2. Download SP-Flash-Tool Wajib pake versi SP_Flash_Tool_v5.1824_Win Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms/wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k


Cara Flash HYVE Pryme 01  via Flash Tool



 Log Read Firmware HYVE Pryme 01
 Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6797
BB_CPU_NME : [MediaTek] Helio[X20]|MT6797_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R4BNJ
[eMMC] : FLASH_CID : 150100424A4E42345207002FEC048339
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xFCC4CFBD76C3525EA6605EE815A5B0AE
INT RAM    : 0x00000000
EXT RAM    : 0xC0000000 [3 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Hyve
ProdName  : pryme01
ProdModel : Pryme 01
Device    : pryme01
AndroidVer: 6.0
MTKxCPU   : MT6797
MTKxPRJ   : alps-mp-m0.mp9-V1.33_wtk6797.5u

[Read Ok] : preloader_x6028_hyve_5u.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : scp1.img
[Read Ok] : scp2.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6797 / V1.1.2 / x6028_hyve_5u / EMMC
Android Info saved
HWConfig Info saved
FW Size : 4160 MiB
Scatter saved to : F:\New folder\MT6797__Hyve__Pryme_01__pryme01__6.0__alps-mp-m0.mp9-V1.33_wtk6797.5u\

All done!

Done!



Senin, 14 Oktober 2019

Flash & Bypass FRP Evercoss GENPRO S55B


 FRP Evercoss S55B ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Loading    : sp9850ka_1h10_Evercoss_S55B_7.0_V06_20180201.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : sp9850ka_1h10
PacVersion : V06_20180201
FastCheck  : 0x00BACB0394


A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware Evercoss_S55B_BYPASS_FRP_plus_lock  atau  Download Disini (1MB)
 B. Firmware PAC FULL
  1. Download FULL PAC Evercoss_S55B_7.0_V06_20180201 atau Download disini


Tool :
  1. Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms/wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Cara Kerja :
  • Untuk FRP Evercoss GENPRO S55B tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+-)


 Loading    : sp9850ka_1h10_Evercoss_S55B_7.0_V06_20180201.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : sp9850ka_1h10
PacVersion : V06_20180201
FastCheck  : 0x00BACB0394

Loading files ...

File : fdl1-sign.bin
File : fdl2-sign.bin
File : sharkl2_pubcp_nvitem.bin
File : prodnv.img
File : u-boot-spl-16k-sign.bin
File : SC9600_sharkl2_pubcp_modem-sign.dat
File : sharkl2_pubcp_deltanv.bin
File : sharkl2_pubcp_LTEA_DSP-sign.bin
File : sharkl2_pubcp_DM_DSP-sign.bin
File : sharkl2_arm7-sign.bin
File : EXEC_KERNEL_IMAGE.bin
File : boot-sign.img
File : recovery-sign.img
File : sysinfo.img
File : system.img
File : userdata.img
File : FWVGA_logo_256_td.bmp
File : fastboot_FWVGA_logo_256_td.bmp
File : cache.img
File : tos-sign.bin
File : sml-sign.bin
File : u-boot-sign.bin
File : persist.img
File : sp9850ka_1h10.xml

Load Ok!