kangsuper

Minggu, 25 Oktober 2020

Firmware HOTWAV SYMBOL MAX Scatter File

 

 Patch Level    : O11019
Display ID     : D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 1543481090
Product Model  : Symbol Max
Product Brand  : HOTWAV
Product Name   : Symbol_Max
Product Device : Symbol_Max
Product Manfct : HOTWAV
Product Info   : d3966_2g
Product Board  : d3966_2g
Board Platform : mt6739


Bahan :
1. Download Firmware HOTWAV SYMBOL MAX Scatter File


2. Tested Via CM2, SP-Flash-Tool blm test Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

TESTED CM2 V2.10 BASE _V1952

 Log Read Firmware HOTWAV SYMBOL MAX Scatter File

Operation : Read Firmware [ v2.10 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
BROM : SOCID : 18D614CB6DB62B6D0D30F509A26C7E198711BAA1404205F5DC2033E1700E8A03
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484147326550704D754056347
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG2e
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 9CCD730DF34B552ED6502BBE4086BABC

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 1543481090
Product Model  : Symbol Max
Product Brand  : HOTWAV
Product Name   : Symbol_Max
Product Device : Symbol_Max
Product Manfct : HOTWAV
Product Info   : d3966_2g
Product Board  : d3966_2g
Board Platform : mt6739

MT6739__HOTWAV__Symbol_Max__8.1.0__D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05__O11019__d3966_2g

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 45%
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img
Read : sdrpmb.img

FW Size  : 2.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\hot wave\symbol max\MT6739__HOTWAV__Symbol_Max__8.1.0__D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05__O11019__d3966_2g\

Done!
Elapsed: 00:05:19





Senin, 12 Oktober 2020

Firmware OPSSON S06_JHM_M032MD_m032_6.0_PJ003AC_JX_R23_P46_V09 PAC FILE

 


Device Brand   : Android
Device Model   : m032
Device CPU     : s06_jhm_m032md
Device IntName : m032b_4_x
Device Version : 6.0
Device Compile : 7/28/2020 11:52:46 AM
Device Project : PJ003AC_JX_R23_P46_V09_And_20200728
Device ExtInfo : P46

BISA JUGA UNTUK : S06_JHM_M032MD_m032_6.0_PJ003AC_JX_R23_P46_V12_And_20200926_P4

 

DOWNLOAD

  1.  DOWLOAD OPSSON S06_JHM_M032MD_m032_6.0_PJ003AC_JX_R23_P46_V09 PAC FILE
  2.  NV V12 & NV OPSSON V09
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms / WA only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

BOOT VOLUME +-

Log Read Firmware OPSSON S06_JHM_M032MD_m032_6.0_PJ003AC_JX_R23_P46_V09 PAC FILE

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : m032b_4_x
Model Brand : Android
Model Device: m032
AndrVersion : 6.0
BaseBand CPU: S06_JHM_M032MD
Project Ver : PJ003AC_JX_R23_P46_V09_And_20200728
Model Ext   : P46

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x960.bin
[Read Ok] : fblogo_480x960.bin
[Read Ok] : fbootlogo2.bin
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Read Ok] : fbootlogo6.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2139 MiB
Saved to : D:\ANDROID LAIN2\opsson\S06_JHM_M032MD_m032_6.0_PJ003AC_JX_R23_P46_V09_And_20200728_P46\
Done!




Kamis, 08 Oktober 2020

Firmware Novo BONVI Prime scatter file TESTED DONE!!!

 


Brand     : novo
ProdName  : t596_novo_37m35
ProdModel : Bonvi Prime
Device    : t596_novo_37m35
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : Bonvi-Prime.v06.mt6737m.35.n

Bahan :
1. Download Firmware Novo BONVI Prime scatter file


2. SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Log Read Firmware NOVO BONVI PRIME

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065314738246107056579E5DD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505076124DDE55265
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA93155676865DD472C40E0DF478D3324
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : novo
ProdName  : t596_novo_37m35
ProdModel : Bonvi Prime
Device    : t596_novo_37m35
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : Bonvi-Prime.v06.mt6737m.35.n

[Read Ok] : preloader_t596_tg_q19_n_novo_37m35.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / t596_tg_q19_n_novo_37m35 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3100 MiB
Scatter saved to : D:\New folder (2)\MT6737M__novo__Bonvi_Prime__t596_novo_37m35__7.0__Bonvi-Prime.v06.mt6737m.35.n\

All done!




Senin, 05 Oktober 2020

FIX Advan I5C Lite BLANK / LCD Garis2 Abis Flash

 FIX Advan I5C Lite BLANK / LCD Garis2 After Flash

 

    Download Tool : 
     
  1.  DOWLOAD FILE FIX Advan I5C Lite BLANK / LCD Garis2 Abis Flash
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms / WA only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 

 Tinggal Flash pake SPD UPGRADE TOOL

 


 

 

Jumat, 02 Oktober 2020

Firmware Nubio Lite N2 LS032I

 


Patch Level    : O11019
Display ID     : LS032I_ZH098_02B_V28_20180831
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 08.10.2018
Product Model  : LS032I
Product Brand  : Nubio_Lite
Product Name   : N2_Lite
Product Device : LS032I
Product Manfct : Fortune Ship
Product Info   : k39tv1_bsp
Product Board  : LS032I
Board Platform : mt6739

Bahan :
1. Download Firmware Nubio Lite N2 LS032I Scatter File


2. Tested Via CM2, SP-Flash-Tool blm test Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

  • CM2 V215 SET 0_BASE 1812

 

 Log Read Firmware Nubio Lite N2 LS032I Scatter File

Operation : Read Firmware [ v2.15 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM19)
MODE : PRELOADER PORT
PORT : 19
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Zion
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1812 | Manual : Disabled
BROM : SOCID : D8DD431B492A7242379790A5E13ADBB804C668301F3CCBF05592F0CD4593A000
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484247346132A56200280515C9
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 3F8A9C6B4B60B80BFD7BB84DC9615493

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : LS032I_ZH098_02B_V28_20180831
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 08.10.2018
Product Model  : LS032I
Product Brand  : Nubio_Lite
Product Name   : N2_Lite
Product Device : LS032I
Product Manfct : Fortune Ship
Product Info   : k39tv1_bsp
Product Board  : LS032I
Board Platform : mt6739

MT6739__Fortune_Ship__LS032I__8.1.0__LS032I_ZH098_02B_V28_20180831__O11019__k39tv1_bsp

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 61%
Read : system.img
ExtSparse : Compression ratio : 41%
Read : cache.img
Read : userdata.img

FW Size  : 2.07 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\nubia\lite\New folder (2)\MT6739__Fortune_Ship__LS032I__8.1.0__LS032I_ZH098_02B_V28_20180831__O11019__k39tv1_bsp\

Done!
Elapsed: 00:05:42