kangsuper

Selasa, 01 November 2022

Firmware SHARP SH-C03 / SHARP_SH_C03_MT6765__TCL__A.210812.016__uze


 

Patch Level : SP1A.210812.016
Display ID : SP1A.210812.016 release-keys
SW Version : NAAC
Ver. CodeName : REL
Ver. Release : 12
Sec. Patch : 2021-11-05
Build Time : 11.01.2022
Product Info : cruze
SW : vnd_cruze-user 12 SP1A.210812.016 NAAC release-keys
Product Manfct : TCL
Product Board : MT6762
Board Platform : mt6765

MT6765__TCL__A.210812.016__uze
 

Bahan :
1. Download ROM Firmware Firmware SHARP SH-C03  Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 Log read Firmware SHARP SH-C03

 Operation : Read Firmware [ v2.37 ]
[+] ExtSparse
[-] ForceRead

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MTK USB Port (COM27)
MODE: BOOTROM
PORT: 27
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]

BROM: MEID: 26C0F31EB5F3A0D1A24838C89D3638DA
BROM: SecLevel: 0x000000E7
BROM: SecMode : SBC+SLA+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: AB671DCEE2D60800DDA630C39B9BA2DA349020FCCF8479C06EED0EB5A90C3437
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT231\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID: F40122426977696E201182AFBC1CA8E1
        EMMC: VEN: Biwin : OEM: 34 : ID: 426977696E20 : PRV: 0x11
        EMMC: VEN: Biwin : Biwin
        EMMC: SNN: 2192555036 ( 0x82AFBC1C ) MF: 10/2021

     EMI: FireFly preloader_cruze.bin with 7 memory type(s) supported
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID: F40122426977696E201182AFBC1CA8E1
        EMMC: VEN: Biwin : OEM: 34 : ID: 426977696E20 : PRV: 0x11
        EMMC: VEN: Biwin : Biwin
        EMMC: SNN: 2192555036 ( 0x82AFBC1C ) MF: 10/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x748000000 [ 29.13 GB ]

     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]
     RNID: E6CB2B578C14730CDEAF78A0E97662DF


DA: USB: HIGH-SPEED

Boot done

Info: Device support slots
Info: Active slot : a

Patch Level : SP1A.210812.016
Display ID : SP1A.210812.016 release-keys
SW Version : NAAC
Ver. CodeName : REL
Ver. Release : 12
Sec. Patch : 2021-11-05
Build Time : 11.01.2022
Product Info : cruze
SW : vnd_cruze-user 12 SP1A.210812.016 NAAC release-keys
Product Manfct : TCL
Product Board : MT6762
Board Platform : mt6765

MT6765__TCL__A.210812.016__uze

Read: preloader.bin
Read: oembin.img
Read: simlock.img
Read: persist.img
ExtSparse : Compression ratio : 58%
Read: tcdpersist.img
ExtSparse : Compression ratio : 93%
Read: minipersist.img
ExtSparse : Compression ratio : 99%
Read: lcmreserved.img
Read: proinfo.img
Read: efuse.img
Read: swversion.img
Read: nvram.bin
Read: oempersist.img
ExtSparse : Compression ratio : 96%
Read: smart.img
Read: logo.bin
Read: md1rom.img
Read: spmfw.img
Read: lcmparameter.img
Read: tinysys-scp.bin
Read: sspm.img
Read: gz.img
Read: lk.bin
Read: boot.img
Read: dtbo.img
Read: tz.img
Read: vbmeta.img
Read: vbmeta_system.img
Read: vbmeta_vendor.img
Read: super.img
ExtSparse : Compression ratio : 8%
Read: odm.img
ExtSparse : Compression ratio : 90%
Read: product.img
ExtSparse : Compression ratio : 1%
Read: vendor.img
ExtSparse : Compression ratio : 1%
Read: system.img
ExtSparse : Compression ratio : 1%
Read: preload.img
ExtSparse : Compression ratio : 1%
Read: oem.img
ExtSparse : Compression ratio : 15%
Read: userdata.img

FW Size: 19.71 GB
Android Info saved: _Android_info.txt
Scatter: MT6765_Android_scatter.txt
Saved to: E:\SHARP SH-C03\MT6765__TCL__A.210812.016__uze\
Verify firmware [MT6765__TCL__A.210812.016__uze]...
Finished
Verify device config...
Finished
Done
Elapsed: 00:35:31


 

 

Senin, 31 Oktober 2022

Firmware Infinix X6812B / HOT 11S NFC

 

SW : Infinix/X6812B-OP/Infinix-X6812B:11/RP1A.200720.011/220715V465:user/release-keys
Product Brand : Infinix
Product Device : Infinix-X6812B
Product Model : Infinix X6812B
Product Name : X6812B-OP
Patch Level : RP1A.200720.011
Display ID : X6812B-H6912KL-R-OP-220715V465
SW Version : 220715V465
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-06-05
Build Time : 15.07.2022
CPU : arm64-v8a,armeabi-v7a,armeabi
CPU : armeabi-v7a,armeabi
CPU : arm64-v8a
Product Info : x6812_h6912
SW : vnd_x6812_h6912-user 11 RP1A.200720.011 18858 release-keys
Product Board : Infinix-X6812B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__nfinix_X6812B__2B-H6912KL-R-OP-220715V465__A.200720.011__812_h6912

Bahan :
1. Download ROM Firmware Infinix X6812B / HOT 11S NFC  Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 Log read ROM Firmware Infinix X6812B / HOT 11S NFC  Scatter File

 
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MTK USB Port (COM27)
MODE: BOOTROM
PORT: 27
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
     CODE: Talbot
     TYPE: MODERN [RAPHAEL]

BROM: MEID: D1F9E7C0804917E6C3677C41497BEBC4
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 55E99DCA04CBAACFF34A5648ADECBCFB4C59F37D8712A7373659631F6F0136A2
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT231\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID: 90014A68444561503303A26F63533871
        EMMC: VEN: Hynix : OEM: 74 : ID: 684445615033 : PRV: 0x03
        EMMC: VEN: Hynix : hDEaP3
        EMMC: SNN: 2725208915 ( 0xA26F6353 ) MF: 3/2021

     EMI: FireFly preloader_x6812_h6912.bin with 17 memory type(s) supported
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID: 90014A68444561503303A26F63533871
        EMMC: VEN: Hynix : OEM: 74 : ID: 684445615033 : PRV: 0x03
        EMMC: VEN: Hynix : hDEaP3
        EMMC: SNN: 2725208915 ( 0xA26F6353 ) MF: 3/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

     CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
     CODE: Talbot
     TYPE: MODERN [RAPHAEL]
     RNID: 1CBA3887B9A2A46D927DFC4C145905E8


DA: USB: HIGH-SPEED

Boot done

Info: Device support slots
Info: Active slot : a

SW : Infinix/X6812B-OP/Infinix-X6812B:11/RP1A.200720.011/220715V465:user/release-keys
Product Brand : Infinix
Product Device : Infinix-X6812B
Product Model : Infinix X6812B
Product Name : X6812B-OP
Patch Level : RP1A.200720.011
Display ID : X6812B-H6912KL-R-OP-220715V465
SW Version : 220715V465
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-06-05
Build Time : 15.07.2022
CPU : arm64-v8a,armeabi-v7a,armeabi
CPU : armeabi-v7a,armeabi
CPU : arm64-v8a
Product Info : x6812_h6912
SW : vnd_x6812_h6912-user 11 RP1A.200720.011 18858 release-keys
Product Board : Infinix-X6812B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__nfinix_X6812B__2B-H6912KL-R-OP-220715V465__A.200720.011__812_h6912

Read: preloader.bin
Read: proinfo.img
Read: vbmeta.img
Read: vbmeta_system.img
Read: vbmeta_vendor.img
Read: persist.img
ExtSparse : Compression ratio : 85%
Read: md1rom.img
Read: spmfw.img
Read: tinysys-scp.bin
Read: sspm.img
Read: gz.img
Read: lk.bin
Read: logo.bin
Read: boot.img
Read: dtbo.img
Read: tz.img
Read: nvram.bin
Read: super.img
ExtSparse : Compression ratio : 1%
Read: tranfs.img
Read: userdata.img

FW Size: 7.00 GB
Android Info saved: _Android_info.txt
Scatter: MT6768_Android_scatter.txt
Saved to: D:\infinix\x6812b\MT6768__INFINIX_MOBILITY_LIMITED__nfinix_X6812B__2B-H6912KL-R-OP-220715V465__A.200720.011__812_h6912\
Verify firmware [MT6768__INFINIX_MOBILITY_LIMITED__nfinix_X6812B__2B-H6912KL-R-OP-220715V465__A.200720.011__812_h6912]...
Finished
Verify device config...
Finished
Done
Elapsed: 00:13:07




 

 

Selasa, 25 Oktober 2022

Download Rom Firmware Blackberry PRIV STV100


 

BUAT Blackberry PRIV STV100

BARU TEST OK BUAT STV100-3

Bahan :
1. Download ROM Firmware  BlackBerry Priv,

2. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE:

  • FASTBOOT VOL DOWN + ON

CARA FLASH  BlackBerry PRIV STV100-1/2/3/4
1. masuk fastboot vol- on

2. Klik flash all.bat

3. done

 jangan lupa install driver bb

 

 

 

Sabtu, 08 Oktober 2022

Firmware infinix X6816 ROM MT6765___Infinix_X6816__11__X6816-XQ683AMNP-R-OP-220718V574__RP1A.200720.011__x6816_xq683

 NOSS

Product Brand  : Infinix
Product Device : Infinix-X6816
Product Model  : Infinix X6816
Product Name   : X6816-OP
Patch Level    : RP1A.200720.011
Display ID     : X6816-XQ683AMNP-R-OP-220718V574
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-06-05
Build Time     : 18.07.2022
Product Info   : x6816_xq683
Product Board  : Infinix-X6816
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X6816__11__X6816-XQ683AMNP-R-OP-220718V574__RP1A.200720.011__x6816_xq683

Bahan :
1. Download ROM Firmware X6816 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 
Operation : Read Firmware [ v2.35 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 8D585067AE02C0A5EEEB3F7AD23C4DC0
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 1C2665260E60EFFFF5E1C40A941C7DC7B75E28D389D8BEF5CAB752C958C0F7B6
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed
BROM : SEC : 0x000000E0
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID : D60103413341343432101D23A22249ED
        EMMC: VEN : UNKNOWN [0xD6] : OEM : 3 : ID : 413341343432 : PRV : 0x10
        EMMC: VEN : UNKNOWN [0xD6] : A3A442
        EMMC: SNN : 488874530 ( 0x1D23A222 ) , MF : 4/2022

     EMI : DEV : FireFly
     EMI : SRC : preloader_x6816_xq683.bin
     EMI : CNT : 0004
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : D60103413341343432101D23A22249ED
        EMMC: VEN : UNKNOWN [0xD6] : OEM : 3 : ID : 413341343432 : PRV : 0x10
        EMMC: VEN : UNKNOWN [0xD6] : A3A442
        EMMC: SNN : 488874530 ( 0x1D23A222 ) , MF : 4/2022

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1CCF000000 [ 115.23 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E51E1F4AD5BC5D494ADC0786D27640CC

DA : USB : HIGH-SPEED

Boot done

Info : Device support slots
Info : Active slot : a

Product Brand  : Infinix
Product Device : Infinix-X6816
Product Model  : Infinix X6816
Product Name   : X6816-OP
Patch Level    : RP1A.200720.011
Display ID     : X6816-XQ683AMNP-R-OP-220718V574
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-06-05
Build Time     : 18.07.2022
Product Info   : x6816_xq683
Product Board  : Infinix-X6816
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X6816__11__X6816-XQ683AMNP-R-OP-220718V574__RP1A.200720.011__x6816_xq683

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 84%
Read : nvram.bin
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : tkv.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 1%
Read : tranfs.img
Read : userdata.img

FW Size  : 6.55 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\infinix\x6816\MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X6816__11__X6816-XQ683AMNP-R-OP-220718V574__RP1A.200720.011__x6816_xq683\
Check firmware [MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X6816__11__X6816-XQ683AMNP-R-OP-220718V574__RP1A.200720.011__x6816_xq683]...
Can not check

Done
Elapsed: 00:12:01

 


 

Firmware Infinix-X689 rom MT6768__Infinix_X689__11__X689-H696GHAa-R-GL-211011V435__RP1A.200720.011__x689_h696

 noss

Product Brand  : Infinix
Product Device : Infinix-X689
Product Model  : Infinix X689
Product Name   : X689-GL
Patch Level    : RP1A.200720.011
Display ID     : X689-H696GHAa-R-GL-211011V435
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 11.10.2021
Product Info   : x689_h696
Product Board  : Infinix-X689
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X689__11__X689-H696GHAa-R-GL-211011V435__RP1A.200720.011__x689_h696

Bahan :
1. Download ROM Firmware X689 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 


Operation : Read Firmware [ v2.35 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 5B7EE1AE4DAB0EFE7CAB6EC88678FDAF
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 7E38F37A2A418F582CD771D99653B509F316A1D48DE21A90CB834C086B616576
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found
BROM : SLA : Auth Passed
BROM : SEC : 0x000000E0
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID : 90014A68433961503301100AC10C5803
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 269140236 ( 0x100AC10C ) , MF : 5/2021

     EMI : DEV : FireFly
     EMI : SRC : pr
     EMI : CNT : 000E
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433961503301100AC10C5803
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 269140236 ( 0x100AC10C ) , MF : 5/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : ABBC5BB5D30C36DAC452E466FD88C094

DA : USB : HIGH-SPEED

Boot done

Info : Device support slots
Info : Active slot : a

Product Brand  : Infinix
Product Device : Infinix-X689
Product Model  : Infinix X689
Product Name   : X689-GL
Patch Level    : RP1A.200720.011
Display ID     : X689-H696GHAa-R-GL-211011V435
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 11.10.2021
Product Info   : x689_h696
Product Board  : Infinix-X689
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X689__11__X689-H696GHAa-R-GL-211011V435__RP1A.200720.011__x689_h696

Read : preloader.bin
Read : proinfo.img
Read : tkv.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : nvram.bin
Read : super.img
ExtSparse : Compression ratio : 1%
Read : tranfs.img
Read : userdata.img

FW Size  : 6.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6768_Android_scatter.txt
Saved to : D:\infinix\x689\MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X689__11__X689-H696GHAa-R-GL-211011V435__RP1A.200720.011__x689_h696\
Check firmware [MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X689__11__X689-H696GHAa-R-GL-211011V435__RP1A.200720.011__x689_h696]...
Can not check

Done
Elapsed: 00:12:09

 

 


 

 

Firmware infinix X-653C ROM Infinix_X653C__9__X653C-H6114GH-PGo-201015V247

 NOSS

 

Patch Level    : PPR1.180610.011
Display ID     : X653C-H6114GH-PGo-201015V247
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-10-05
Build Time     : 15.10.2020
Product Model  : Infinix X653C
Product Brand  : Infinix
Product Name   : H6114
Product Device : Infinix-X653C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x653c_h6114go
Product Board  : Infinix-X653C
Board Platform : mt6761

 

Bahan :
1. Download ROM Firmware X653c Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 Operation : Read Firmware [ v2.35 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MTK USB Port (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 44648E9BD84651150F8A7A241725802E
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA5F4820BF2004EE45D84928DD745743F2C1263CFE52C48BAFBB29B472E3B346
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed
BROM : SEC : 0x000000E0
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID : 90014A68423861503E039629E166C677
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 2519327078 ( 0x9629E166 ) , MF : 12/2019

     EMI : DEV : FireFly
     EMI : SRC : preloader_x653c_h6114go.bin
     EMI : CNT : 000E
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 90014A68423861503E039629E166C677
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 2519327078 ( 0x9629E166 ) , MF : 12/2019

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 228D5E43C4339440C99201D6DFED33BE

DA : USB : HIGH-SPEED

Boot done

Patch Level    : PPR1.180610.011
Display ID     : X653C-H6114GH-PGo-201015V247
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-10-05
Build Time     : 15.10.2020
Product Model  : Infinix X653C
Product Brand  : Infinix
Product Name   : H6114
Product Device : Infinix-X653C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x653c_h6114go
Product Board  : Infinix-X653C
Board Platform : mt6761

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go

Read : preloader.bin
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 42%
Read : system.img
ExtSparse : Compression ratio : 26%
Read : vbmeta.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : cache.img
Read : recovery.img
Read : tkv.img
Read : proinfo.img
Read : userdata.img

FW Size  : 2.23 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\x653c\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go\
Check firmware [MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go]...
Can not check

Done
Elapsed: 00:05:03


 

Selasa, 14 Juni 2022

Firmware Infinix X688B ~ Infinix_X688B__11__X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527

 NO SS


Product Brand  : Infinix
Product Device : Infinix-X688B
Product Model  : Infinix X688B
Product Name   : X688B-GL
Patch Level    : RP1A.200720.011
Display ID     : X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-04-05
Build Time     : 18.04.2022
Product Info   : x688b_h659
Product Board  : Infinix-X688B
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED


Bahan :
1. Download ROM Firmware X688B Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k


 

 Operation : Read Firmware [ v2.34 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : C964DD8EF6E14EFBA2CFA986F46CDCE6
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6BD5C565BDC4DBE9D3BF1C6AACDB14C3781730231E05471CE00035214CFE8946
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 1501004448364441420288F59074884B
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444142 : PRV : 0x02
        EMMC: VEN : SAMSUNG : DH6DAB
        EMMC: SNN : 2297794676 ( 0x88F59074 ) , MF : 8/2021

     EMI : DEV : FireFly
     EMI : SRC : preloader_x688b_h659.bin
     EMI : CNT : 0014
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 1501004448364441420288F59074884B
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444142 : PRV : 0x02
        EMMC: VEN : SAMSUNG : DH6DAB
        EMMC: SNN : 2297794676 ( 0x88F59074 ) , MF : 8/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 91B3D7863DB6002671F9B9BB366D8E8F

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X688B
Product Model  : Infinix X688B
Product Name   : X688B-GL
Patch Level    : RP1A.200720.011
Display ID     : X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-04-05
Build Time     : 18.04.2022
Product Info   : x688b_h659
Product Board  : Infinix-X688B
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X688B__11__X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527__RP1A.200720.011__x688b_h659

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 98%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 6%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 5.81 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\infinix\x688b\MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X688B__11__X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527__RP1A.200720.011__x688b_h659\

Done!

 


Minggu, 12 Juni 2022

Firmware i12 MAX CLONE | MT6572__alps__i12_max__x6_v5_x50__4.4.2__N26-i12max_HSD-XY

 


Brand     : alps
ProdName  : x6_v5_x50
ProdModel : i12 max
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : N26-i12max_HSD-XY

 

 Bahan :
1. Download ROM Firmware i12 max | MT6572  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 


Chinese Miracle II  [MTK module] v 1.58

Start  at : [6/11/2022 / 1:59:58 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 15010053355530304D02A380B631C0D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 15010053355530304D02A380B631C0D9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567A488287DB3B8B32BBFECEB0D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : i12 max
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : N26-i12max_HSD-XY

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 808 MiB
Scatter saved to : E:\New folder\MT6572__alps__i12_max__x6_v5_x50__4.4.2__N26-i12max_HSD-XY\

All done!
 

 


 

Minggu, 22 Mei 2022

Firmware COPY SAMSUNG G960U S9+ MT6580__samsung__SM-G960U__hero2qltechn

 


Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G960U
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

Bahan :
1. Download ROM Firmware SAMSUNG G960U S9+ | MT6580  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k


Log Read info Firmware SAMSUNG G960U S9+ | MT6580

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464531324D420D55309BE3542F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM21E
[eMMC] : FLASH_CID : 150100464531324D420D55309BE3542F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xA931556757DE1519031FDD73695CB5A8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G960U
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1697 MiB
Scatter saved to : F:\111NEW ANDRO\ANDROID LAIN2\sam kopyor\MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\

All done!

 


 

 

Rabu, 18 Mei 2022

Firmware Samsung A037F A03s Scatter File

 


Test poin SAMSUNG A037F

Product Brand  : samsung
Product Device : a03s
Product Model  : SM-A037F
Product Name   : a03snnxx
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012.A037FXXU1AVC1
Build Time     : 29.03.2022
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-04-01
Product Info   : a03s
Product Board  : hs03s
Board Platform : mt6765
Product Manfct : samsung

Bahan :
1. Download ROM Firmware Samsung A037F A03s Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot testpoin gambar diatas


Operation : Read Firmware [ v2.33 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : A649EFCF5C08DD2C2828298147A1CC82
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3F4730BC6AB784DE7FDDFCD8901AB9E0CED24702E84F97DDF33F0D04853E41F0
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 15010052503634414200B964CCD29851
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525036344142 : PRV : 0x00
        EMMC: VEN : SAMSUNG : RP64AB
        EMMC: SNN : 3110390994 ( 0xB964CCD2 ) , MF : 9/2021

     EMI : DEV : FireFly
     EMI : SRC : preloader_hs03s.bin
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 15010052503634414200B964CCD29851
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525036344142 : PRV : 0x00
        EMMC: VEN : SAMSUNG : RP64AB
        EMMC: SNN : 3110390994 ( 0xB964CCD2 ) , MF : 9/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 46846FC1CC942B058BE010D100A2894

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Device : a03s
Product Model  : SM-A037F
Product Name   : a03snnxx
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012.A037FXXU1AVC1
Build Time     : 29.03.2022
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-04-01
Product Info   : a03s
Product Board  : hs03s
Board Platform : mt6765
Product Manfct : samsung

MT6765__samsung__SM-A037F__11__RP1A.200720.012.A037FXXU1AVC1__RP1A.200720.012__a03s

Read : preloader.bin
Read : efs.img
ExtSparse : Compression ratio : 41%
Read : sec_efs.img
ExtSparse : Compression ratio : 30%
Read : steady.img
Read : nvram.bin
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : tz.img
Read : tzar.img
Read : gz.img
Read : lk.bin
Read : dtbo.img
Read : vbmeta.img
Read : btd.img
Read : persistent.img
Read : proinfo.img
Read : md1rom.img
Read : param.img
Read : up_param.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : boot.img
Read : recovery.img
Read : vbmeta_system.img
Read : efuse.img
Read : super.img
ExtSparse : Compression ratio : 12%
Read : prism.img
ExtSparse : Compression ratio : 63%
Read : optics.img
ExtSparse : Compression ratio : 98%
Read : cache.img
Read : omr.img
Read : userdata.img

FW Size  : 5.35 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\samsung mtk\New folder\MT6765__samsung__SM-A037F__11__RP1A.200720.012.A037FXXU1AVC1__RP1A.200720.012__a03s\

Done!
Elapsed: 00:11:36



Firmware Aldo S12 ~ MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+

 


Patch Level    : MRA58K
Display ID     : HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2017-11-05
Build Time     : 22.10.2020
Product Model  : S12
Product Brand  : S12
Product Name   : full_y3be_v11_f_hy_x15
Product Device : y3be_v11_f_hy_x15
Product Manfct : ALDO
Board Platform : mt6737m
Product Info   : y3be_v11_f_hy_x15

MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15

Bahan :
1. Download ROM Firmware Welcome Oppo P48pro Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar  SHOPEE PAY / GOPAY 20k


 
Operation : Read Firmware Aldo S12 [ v2.33 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 13014E51334A3937561006F35219869F
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: CID : 13014E51334A3937561006F35219749F
        EMMC: VEN : MICRON : OEM : 78 : ID : 51334A393756 : PRV : 0x10
        EMMC: VEN : MICRON : Q3J97V
        EMMC: SNN : 116609561 ( 0x06F35219 ) , MF : 7/2017

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 378AACE7AC6BDA36EFE5DFCACAB0775F

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2017-11-05
Build Time     : 22.10.2020
Product Model  : S12
Product Brand  : S12
Product Name   : full_y3be_v11_f_hy_x15
Product Device : y3be_v11_f_hy_x15
Product Manfct : ALDO
Board Platform : mt6737m
Product Info   : y3be_v11_f_hy_x15

MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 2.12 GB
Android Info saved : _Android_info.txt
Scatter  : MT6737M_Android_scatter.txt
Saved to : E:\New folder\MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15\

Done!


 

 

 

Firmware NOWA 7 PRO | MT6572__alps__nowa_7_pro__4.4.2

 NO SS


Patch Level    : KOT49H
Display ID     : ALPS.KK1.MP7.Band1.2.5.V1.3-2020-10-14_11-54
Ver. CodeName  : REL
Ver. Release   : 4.4.2
Build Time     : 14.10.2020
Product Model  : nowa 7 pro
Product Name   : nowa 7 pro
Product Device : zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl
Product Board  : zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl
Product Brand  : welcome
Product Manfct : alps
Product Info   : zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl

 Bahan :
1. Download ROM Firmware NOWA 7 PRO | MT6572  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k


Operation : Read Firmware NOWA 7 PRO[ v2.29 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : CHANGE : v2012
AGENT : Found MT6572
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 53000115303055359AE70A4D65C06DB6
DAInf: 4 : 2 : 136
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: CID : 15010053355530304D0AE79AB66DC065
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 53355530304D
        EMMC: VEN : SAMSUNG : S5U00M
        EMMC: SNN : 3885676141 ( 0xE79AB66D) , MF : 12/2013

        EMMC:
              BOOT1  : 0x00200000 [ 2.00 MB ]
              BOOT2  : 0x00200000 [ 2.00 MB ]
              RPMB   : 0x00020000 [ 128.00 KB ]
              USER   : 0xE9000000 [ 3.64 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C9CEAF82F8DC328410435444D55351

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : KOT49H
Display ID     : ALPS.KK1.MP7.Band1.2.5.V1.3-2020-10-14_11-54
Ver. CodeName  : REL
Ver. Release   : 4.4.2
Build Time     : 14.10.2020
Product Model  : nowa 7 pro
Product Name   : nowa 7 pro
Product Device : zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl
Product Board  : zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl
Product Brand  : welcome
Product Manfct : alps
Product Info   : zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl

MT6572__alps__nowa_7_pro__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3-2020-10-14_11-54__KOT49H__zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl

Read : preloader.bin
Read : mbr.img
Read : ebr.img
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : secro.img
Read : logo.bin
Read : system.img
ExtSparse : Compression ratio : 30%
Read : cache.img
Read : userdata.img

FW Size  : 538.85 MB
Android Info saved : _Android_info.txt
Scatter  : MT6572_Android_scatter.txt
Saved to : E:\New folder\MT6572__alps__nowa_7_pro__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3-2020-10-14_11-54__KOT49H__zl9e_ctx_jr201_p139_nowa7_pro_zll_emmc32_4_ddr1_b15_hd_fl\

Done!
Elapsed: 00:03:46






Senin, 16 Mei 2022

Firmware Infinix HOT 10 X682C & X682B

 

Product Brand  : Infinix
Product Device : Infinix-X682B
Product Model  : Infinix X682B
Product Name   : X682B-GL
Patch Level    : QP1A.190711.020
Display ID     : X682B-H694ABT-Q-GL-210831V339
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-09-05
Build Time     : 31.08.2021
Product Info   : x682b_h694
Product Board  : Infinix-X682B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X682B__10__X682B-H694ABT-Q-GL-210831V339__QP1A.190711.020__x682b_h694

 

Bahan :
1. Download ROM Firmware HOT 10  Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 NOTE :

 boot vol + /-

 


Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 209E867D72374342E3A08B0E53A6F017
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 5C0A36ED9F98B9D6352E9B403B8149E5CB7FFA11076AEA1C4BDE71FEF84FE20D
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x682b_h694.bin
     EMI : CNT : 000E
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433861503E028EC9DFB1670B
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
        EMMC: VEN : HYNIX : hC8aP>
        EMMC: SNN : 2395594673 ( 0x8EC9DFB1) , MF : 6/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : E1B96354D1D5C05779F71CF7C766316C

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X682B
Product Model  : Infinix X682B
Product Name   : X682B-GL
Patch Level    : QP1A.190711.020
Display ID     : X682B-H694ABT-Q-GL-210831V339
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-09-05
Build Time     : 31.08.2021
Product Info   : x682b_h694
Product Board  : Infinix-X682B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X682B__10__X682B-H694ABT-Q-GL-210831V339__QP1A.190711.020__x682b_h694

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 8%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 4.71 GB
Android Info saved : _Android_info.txt
Scatter  : MT6768_Android_scatter.txt
Saved to : D:\infinix\x682b\MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X682B__10__X682B-H694ABT-Q-GL-210831V339__QP1A.190711.020__x682b_h694\

Done!
Elapsed: 00:09:25