Firmware infinix X-653C ROM Infinix_X653C__9__X653C-H6114GH-PGo-201015V247

 NOSS

 

Patch Level    : PPR1.180610.011
Display ID     : X653C-H6114GH-PGo-201015V247
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-10-05
Build Time     : 15.10.2020
Product Model  : Infinix X653C
Product Brand  : Infinix
Product Name   : H6114
Product Device : Infinix-X653C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x653c_h6114go
Product Board  : Infinix-X653C
Board Platform : mt6761

 

Bahan :
1. Download ROM Firmware X653c Scatter File,

• Download Rom Firmware Infinix X653c | MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 Operation : Read Firmware [ v2.35 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MTK USB Port (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 44648E9BD84651150F8A7A241725802E
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA5F4820BF2004EE45D84928DD745743F2C1263CFE52C48BAFBB29B472E3B346
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed
BROM : SEC : 0x000000E0
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID : 90014A68423861503E039629E166C677
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 2519327078 ( 0x9629E166 ) , MF : 12/2019

     EMI : DEV : FireFly
     EMI : SRC : preloader_x653c_h6114go.bin
     EMI : CNT : 000E
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 90014A68423861503E039629E166C677
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 2519327078 ( 0x9629E166 ) , MF : 12/2019

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 228D5E43C4339440C99201D6DFED33BE

DA : USB : HIGH-SPEED

Boot done

Patch Level    : PPR1.180610.011
Display ID     : X653C-H6114GH-PGo-201015V247
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-10-05
Build Time     : 15.10.2020
Product Model  : Infinix X653C
Product Brand  : Infinix
Product Name   : H6114
Product Device : Infinix-X653C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x653c_h6114go
Product Board  : Infinix-X653C
Board Platform : mt6761

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go

Read : preloader.bin
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 42%
Read : system.img
ExtSparse : Compression ratio : 26%
Read : vbmeta.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : cache.img
Read : recovery.img
Read : tkv.img
Read : proinfo.img
Read : userdata.img

FW Size  : 2.23 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\x653c\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go\
Check firmware [MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X653C__9__X653C-H6114GH-PGo-201015V247__PPR1.180610.011__x653c_h6114go]...
Can not check

Done
Elapsed: 00:05:03

 

Firmware MAIMETE M3 PRO MT6572 | MT6572__alps__m3_pro__x6_v5_x50__4.4.2__X3-m3_pro-CPT

 

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : m3 pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : X3-m3_pro-CPT

Bahan :
1. Download ROM Firmware MAIMETE M3 PRO Scatter File

• Firmware MAIMETE M3 PRO MT6572 | MT6572__alps__m3_pro__x6_v5_x50__4.4.2__X3-m3_pro-CPT
  

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 

 Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D00CC3003312131
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00CC3003312131
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA931556796244718974A3739CD05F239
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : m3 pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : X3-m3_pro-CPT

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info savedg
FW Size : 678 MiB
Scatter saved to : D:\New folder\MT6572__alps__m3_pro__x6_v5_x50__4.4.2__X3-m3_pro-CPT\

All done!

 

Firmware Maimete M10 PLUS

 

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : m10 Plus
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_Q906A-m10_Plus-QB

Bahan :
1. Download ROM Firmware Maimete M10 PLUS  Scatter File

• MT6572__alps__m10_Plus__x6_v5_x50__4.4.2__HY_W116_Q906A-m10_Plus-QB-MAIMETE_M10_Plus

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

  NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

 

Log read firmware Maimeite M10 PLUS

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594816A17920D0603F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A17920D0603F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567BEDEE1850A62DABAABC610F3
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : m10 Plus
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_Q906A-m10_Plus-QB

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : D:\ANDROID LAIN2\MAIMEITE\maimete m10 plus\MT6572__alps__m10_Plus__x6_v5_x50__4.4.2__HY_W116_Q906A-m10_Plus-QB\

All done! 

 

Download Firmware NOVO Vi Note scatter file

 
 

 

Brand     : NOVO
ProdName  : Vi_Note
ProdModel : Vi_Note
Device    : Vi_Note
AndroidVer: 7.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-n0.mp7-V1_vz6750.65.i.n_P175

Bahan :
1. Download Firmware  NOVO Vi Note scatter file

•  Download Rom Firmware MT6755__NOVO__Vi_Note__Vi_Note__7.0__alps-mp-n0.mp7-V1_vz6750.65.i.n_P175

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 

Read Firmware Flash NOVO Vi Note

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A4950013469215
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xFCC4CFBD995FD024C9B4AD1E51EE11E1
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : NOVO
ProdName  : Vi_Note
ProdModel : Vi_Note
Device    : Vi_Note
AndroidVer: 7.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-n0.mp7-V1_vz6750.65.i.n_P175

[Read Ok] : preloader_p383.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / p383 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3876 MiB
Scatter saved to : D:\ANDROID LAIN2\novo\novo vi note\New folder\MT6755__NOVO__Vi_Note__Vi_Note__7.0__alps-mp-n0.mp7-V1_vz6750.65.i.n_P175\

All done!

Done!
Elapsed: 00:05:34

Samsung S20+ COPY/CLONE | MT6582

 

platform: MT6582, cpu abi: armeabi-v7a
manufacturer: S20+
board: , name: full_q15_tx_g65_s20_emmc64_8_ddr2_b15
brand: S20+, model: S6
build id: LRX21M, version: 5.0.2 Lollipop (DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0_20201202)
build description: full_q15_tx_g65_s20_emmc64_8_ddr2_b15-user 5.0.2 LRX21M 1606912200 release-keys
build version: DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0
lcd: gc9503v_fwvgaj_jiaj_h10_ivo  st7701s_fwvgaj_dw_x01_boe  jd9161aa_fwvgajj_tx_g65_1014boe  jd9161aa_fwvgaj_tx_g66_ivo
screen resolution: 1014 x 480
 lens: dw9714af fm50af
audio: amp_aw8736
touch: focaltech_new  gslX680
modem: dw_q15_b15

preloader_q15_tx_g65_s20_emmc64_8_ddr2_b15.bin

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-452  Scatter File

• BACKUP UFI FULL DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0_20201202
  
• BACKUP CM2 MT6582__S20+__S6__q15_tx_g65_s20_emmc64_8_ddr2_b15__5.0.2

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 

Log read firmware Samsung S20+ COPY/CLONE | MT6582

Please "Identify Device" at first, before any other operation.
name: MTK_PLATFORM_CFG
 version: V1.1.1
 platform: MT6582
 project: q15_tx_g65_s20_emmc64_8_ddr2_b15
 storage: EMMC
 bootChannel: MSDC_0
 blockSize: 0x00020000
MTK Preloader file info.
Found 9 supported eMMC CID:
 [Samsung] K7XVMB     1501004B 3758564D 42xxxxxx xxxxxxxx
 [Samsung] K7U00M     1501004B 37553030 4Dxxxxxx xxxxxxxx
 [SanDisk] SEM08G     45010053 454D3038 47xxxxxx xxxxxxxx
 [Micron] P1J95L     FE014E50 314A3935 4Cxxxxxx xxxxxxxx
 [Kingston] V10008     70010056 31303030 38xxxxxx xxxxxxxx
 [SK Hynix] H8G1e     90014A48 38473165 05xxxxxx xxxxxxxx
 [SK Hynix] H8G2d     90014A48 38473264 04xxxxxx xxxxxxxx
 [Toshiba] 008G92     11010030 30384739 32xxxxxx xxxxxxxx
 [Micron] P1J95K     FE014E50 314A3935 4Bxxxxxx xxxxxxxx
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Hold the VOL DOWN to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM4)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6582_S01, Hw ver: 0xCA01, Sw ver: 0x0001
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 1 GiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: V10008 (0x563130303038), rev: 0x06, serial number: 0xA81F3858
Manufacturing date: Sep 2015
CID: 70010056 31303030 3806A81F 3858924F
Capacity: 7.06 GiB(7,579,107,328 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 7.05 GiB(7,566,524,416 bytes)
USB speed: High-Speed
platform: MT6582, cpu abi: armeabi-v7a
manufacturer: S20+
board: , name: full_q15_tx_g65_s20_emmc64_8_ddr2_b15
brand: S20+, model: S6
build id: LRX21M, version: 5.0.2 Lollipop (DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0_20201202)
build description: full_q15_tx_g65_s20_emmc64_8_ddr2_b15-user 5.0.2 LRX21M 1606912200 release-keys
build version: DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0
lcd: gc9503v_fwvgaj_jiaj_h10_ivo  st7701s_fwvgaj_dw_x01_boe  jd9161aa_fwvgajj_tx_g65_1014boe  jd9161aa_fwvgaj_tx_g66_ivo
screen resolution: 1014 x 480
 lens: dw9714af fm50af
audio: amp_aw8736
touch: focaltech_new  gslX680
modem: dw_q15_b15
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Hold the VOL DOWN to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM4)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6582_S01, Hw ver: 0xCA01, Sw ver: 0x0001
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 1 GiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: V10008 (0x563130303038), rev: 0x06, serial number: 0xA81F3858
Manufacturing date: Sep 2015
CID: 70010056 31303030 3806A81F 3858924F
Capacity: 7.06 GiB(7,579,107,328 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 7.05 GiB(7,566,524,416 bytes)
USB speed: High-Speed
platform: MT6582, cpu abi: armeabi-v7a
manufacturer: S20+
board: , name: full_q15_tx_g65_s20_emmc64_8_ddr2_b15
brand: S20+, model: S6
build id: LRX21M, version: 5.0.2 Lollipop (DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0_20201202)
build description: full_q15_tx_g65_s20_emmc64_8_ddr2_b15-user 5.0.2 LRX21M 1606912200 release-keys
build version: DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0
lcd: gc9503v_fwvgaj_jiaj_h10_ivo  st7701s_fwvgaj_dw_x01_boe  jd9161aa_fwvgajj_tx_g65_1014boe  jd9161aa_fwvgaj_tx_g66_ivo
screen resolution: 1014 x 480
 lens: dw9714af fm50af
audio: amp_aw8736
touch: focaltech_new  gslX680
modem: dw_q15_b15
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Hold the VOL DOWN to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected PreLoader USB VCOM Port (COM4)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6582_S01, Hw ver: 0xCA01, Sw ver: 0x0001
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 1 GiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: V10008 (0x563130303038), rev: 0x06, serial number: 0xA81F3858
Manufacturing date: Sep 2015
CID: 70010056 31303030 3806A81F 3858924F
Capacity: 7.06 GiB(7,579,107,328 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 7.05 GiB(7,566,524,416 bytes)
USB speed: High-Speed
platform: MT6582, cpu abi: armeabi-v7a
manufacturer: S20+
board: , name: full_q15_tx_g65_s20_emmc64_8_ddr2_b15
brand: S20+, model: S6
build id: LRX21M, version: 5.0.2 Lollipop (DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0_20201202)
build description: full_q15_tx_g65_s20_emmc64_8_ddr2_b15-user 5.0.2 LRX21M 1606912200 release-keys
build version: DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0
lcd: gc9503v_fwvgaj_jiaj_h10_ivo  st7701s_fwvgaj_dw_x01_boe  jd9161aa_fwvgajj_tx_g65_1014boe  jd9161aa_fwvgaj_tx_g66_ivo
screen resolution: 1014 x 480
 lens: dw9714af fm50af
audio: amp_aw8736
touch: focaltech_new  gslX680
modem: dw_q15_b15
Reading preloader_q15_tx_g65_s20_emmc64_8_ddr2_b15.bin... Done.
Reading mbr... Done.
Reading ebr1... Done.
Reading pro_info... Done.
Reading nvram... Done.
Reading protect_f... Done.
Reading protect_s... Done.
Reading seccfg... Done.
Reading uboot.bin... Done.
Reading bootimg.img... Done.
Reading recovery.img... Done.
Reading sec_ro.img... Done.
Reading misc... Done.
Reading logo.bin... Done.
Reading expdb... Done.
Reading android.img... Done.
Reading cache.img... Done.
Reading usrdata.img... Done.
Files saved to \\D:\ANDROID%20LAIN2\samsung\s20+\MT6582__S20+__S6__q15_tx_g65_s20_emmc64_8_ddr2_b15__5.0.2__DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0\DW_Q15_64V8_B15_FWP_TX_G65_S20+_V1.0_20201202\
Completed in 23 mins 18.758 s

 

Flash & Firmware Maimeite NOTE30 PLUS | NOTE 30 +

 

 

 

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : Note30 Plus
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106_M501-Note30_Plus

 pass : not-e30+sip

Bahan :
1. Download ROM Firmware Firmware Maimeite NOTE30 PLUS   Scatter File

•  MT6572__alps__Note30_Plus__x6_v5_x50__4.4.2__HY_W106_M501-Note30_Plus

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

 

Log read firmware Maimeite NOTE30 PLUS

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D42036AD8D0CC31BF
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42036AD8D0CC31BF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBDA33A00652756689ED5478A53
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : Note30 Plus
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106_M501-Note30_Plus

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : D:\ANDROID LAIN2\MAIMEITE\NOTE30 Plus\New folder\MT6572__alps__Note30_Plus__x6_v5_x50__4.4.2__HY_W106_M501-Note30_Plus\

All done!

 

 

 

 

Firmware & Flash Wearnes ZeusPhone ZP-452

 

 

Brand     : K450
ProdName  : ZP_452
ProdModel : ZeusPhone ZP-452
Device    : ZP_452
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10
preloader_rjk301_w_k450_zp_82.bin

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-452  Scatter File

•  MT6582__K450__ZeusPhone_ZP-452__ZP_452__4.4.2__ALPS.KK1.MP1.V2.10

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Log read firmware Wearnes ZeusPhone ZP-452

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201CBC9CE12919D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201CBC9CE12919D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD82173AE34844DDA0025F5A71
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : K450
ProdName  : ZP_452
ProdModel : ZeusPhone ZP-452
Device    : ZP_452
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_rjk301_w_k450_zp_82.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / rjk301_w_k450_zp_82 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 949 MiB
Scatter saved to : D:\ANDROID LAIN2\Wearnes\ZeusPhone_ZP-452\MT6582__K450__ZeusPhone_ZP-452__ZP_452__4.4.2__ALPS.KK1.MP1.V2.10\

All done!
 

 

Firmware & Flash Wearnes ZeusPhone ZP-541

 

 

Brand     : Wearnes
ProdName  : ZeusPhone ZP-541
ProdModel : ZeusPhone ZP-541
Device    : ZeusPhone ZP-541
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ZP-541_1.0_4.4.2_20150602

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-541  Scatter File

•  Download Rom  MT6582__Wearnes__ZeusPhone_ZP-541__ZeusPhone_ZP-541__4.4.2__ZP-541_1.0_4.4.2_20150602

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Log read firmware Wearnes ZeusPhone ZP-541

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 89 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507AB72E85F324B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507AB72E85F324B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDF9A94BB2C05113A7D812DBE4
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Wearnes
ProdName  : ZeusPhone ZP-541
ProdModel : ZeusPhone ZP-541
Device    : ZeusPhone ZP-541
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ZP-541_1.0_4.4.2_20150602

[Read Ok] : preloader_hexing82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hexing82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 955 MiB
Scatter saved to : D:\ANDROID LAIN2\Wearnes\ZeusPhone ZP-541\MT6582__Wearnes__ZeusPhone_ZP-541__ZeusPhone_ZP-541__4.4.2__ZP-541_1.0_4.4.2_20150602\

All done!

 

 

Firmware & Flash Evercoss M55A ~ SP9836A ~ Via Infinity CM2 ONLY !!!

 NO SS

Patch Level    : OPM2.171019.012
Display ID     : EVERCOSS_M55A_V11_8.1_09012019
Ver. Incmt     : 090119
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-12-05
Build Time     : 08.01.2019
Product Model  : M55A
Product Brand  : EVERCOSS
Product Name   : M55A
Product Device : M55A
Product Manfct : EVERCOSS
Product Info   : M55A
Product Board  : sp9863a_1h10
Board Platform : sp9863a

AndroidVer : 8
VlnrLevel : 0x02

SP9863A__EVERCOSS__M55A__8.1.0__EVERCOSS_M55A_V11_8.1_09012019__OPM2.171019.012__M55A

Bahan :
1. Download ROM Firmware Flash Evercoss M55A

• Download Rom Firmware Flash SP9863A__EVERCOSS__M55A__8.1.0__EVERCOSS_M55A_V11_8.1_09012019
• NVRAM_evercoss_m55a
  

2. File only tested via CM2 SPD v211

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

-BOOT VOLUME +

Log Read Firmware Evercoss M55A

Operation : Read FW [ v2.11 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : OPM2.171019.012
Display ID     : EVERCOSS_M55A_V11_8.1_09012019
Ver. Incmt     : 090119
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-12-05
Build Time     : 08.01.2019
Product Model  : M55A
Product Brand  : EVERCOSS
Product Name   : M55A
Product Device : M55A
Product Manfct : EVERCOSS
Product Info   : M55A
Product Board  : sp9863a_1h10
Board Platform : sp9863a

AndroidVer : 8
VlnrLevel : 0x02

SP9863A__EVERCOSS__M55A__8.1.0__EVERCOSS_M55A_V11_8.1_09012019__OPM2.171019.012__M55A

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : deltanv_l.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
ExtSparse : Compression ratio : 92%
Read : vendor.img
ExtSparse : Compression ratio : 83%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 38%
Read : phase.cfg
Read : u-boot-spl.bin

Firmware size : 0xCB6EB604 ( 3.18 GiB )
Android Info saved : _Android_info.txt

Firmware CLONE Samsung G920F (HDC) | MT6582 FAKE | preloader_hedy72_w_kk.bin MT6572

 

 

Brand     : Samsung
ProdName  : Lite
ProdModel : SM-G920F (HDC)
Device    : HDC
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : HDC.KK1.MP7.V1.22

preloader_hedy72_w_kk.bin

Bahan :
1. Download ROM Firmware CLONE Samsung G920F (HDC)   Scatter File

•  Download Rom MT6582__Samsung__SM-G920F_(HDC)__HDC__5.0.2__HDC.KK1.MP7.V1.22

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 

Read Firmware Flash Copy Samsung G920F (HDC)

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473AF00A23CD5263
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473AF00A23CD5263
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD2B0B4087F9563E30BE7DC92E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Samsung
ProdName  : Lite
ProdModel : SM-G920F (HDC)
Device    : HDC
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : HDC.KK1.MP7.V1.22

[Read Ok] : preloader_hedy72_w_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hedy72_w_kk / EMMC
Android Info saved
HWConfig Info saved
FW Size : 824 MiB
Scatter saved to : D:\ANDROID LAIN2\samsung\New folder\MT6582__Samsung__SM-G920F_(HDC)__HDC__5.0.2__HDC.KK1.MP7.V1.22\

All done! 

Firmware & Flash HI CORE LENS DC1 | MT6580

 

Patch Level    : LMY47I
Display ID     : ALF_S4507_WZ_V195B-B_Lens DC1_V1.0.1_20160606
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-03-01
Build Time     : 06.06.2016
Product Model  : Lens DC1
Product Brand  : alps
Product Name   : full_magc6580_we_l
Product Device : magc6580_we_l
Product Manfct : alps
Board Platform : mt6580
Product Info   : magc6580_we_l

Bahan :
1. Download ROM Firmware HI CORE LENS DC1  Scatter File

•  Download Rom  MT6580__alps__Lens_DC1__5.1__ALF_S4507_WZ_V195B-B_Lens_DC1_V1.0.1_20160606__LMY47I__magc6580_we_l

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Read Firmware Flash HI CORE LENS DC1 | MT6580

 

Log read firmware

 Operation : Read Firmware [ v2.16 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 44000145313031532DA801360B33B04D
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 45010044533130313601A82D4DB0330B
        EMMC: VEN : SANDISK | OEM : 01 | DEV : DS1016
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : BB86D488D289AEEF5442AA617CF32E5

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : LMY47I
Display ID     : ALF_S4507_WZ_V195B-B_Lens DC1_V1.0.1_20160606
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-03-01
Build Time     : 06.06.2016
Product Model  : Lens DC1
Product Brand  : alps
Product Name   : full_magc6580_we_l
Product Device : magc6580_we_l
Product Manfct : alps
Board Platform : mt6580
Product Info   : magc6580_we_l

MT6580__alps__Lens_DC1__5.1__ALF_S4507_WZ_V195B-B_Lens_DC1_V1.0.1_20160606__LMY47I__magc6580_we_l

Read : preloader.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img

FW Size  : 1.80 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\hi core\New folder (2)\MT6580__alps__Lens_DC1__5.1__ALF_S4507_WZ_V195B-B_Lens_DC1_V1.0.1_20160606__LMY47I__magc6580_we_l\

Done!

 

Firmware HOTWAV M5 | MT6739__ragentek__M5__8.1.0__T685_T6_S2_DUBAI_2+16_V13_20190122__O11019__M5

 

Patch Level    : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2019-01-05
Build Time     : 25.01.2019
Product Model  : M5
Product Brand  : HOTWAV
Product Manfct : ragentek
Product Info   : M5
Display ID     : T685_T6_S2_DUBAI_2+16_V13_20190122
Product Name   : M5
Product Device : M5
Product Board  : T685
Product Board  : t685_t6_dubai_pcba_39_o1
Board Platform : mt6739
preloader_t685_t6_dubai_pcba_39_o1

T685_T6_S2_DUBAI_2+16_V15_20201019

pass: m5-hotwavok

Bahan :
1. Download ROM Firmware HOTWAV M5  Scatter File

•  Download Rom MT6739__ragentek__M5__8.1.0__T685_T6_S2_DUBAI_2+16_V13_20190122__O11019__M5

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Read Firmware Flash HOTWAV M5

 

Log Read Firmware Flash HOTWAV M5

Operation : Read Firmware [ v2.16 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     CODE : Zion
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 2E2D8FABE4CC814C082F1FC0802C4302CE40C75EEC1EAD1BB3688BC53BF2F802
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A48414732655073C73392E424B
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG2e
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 573918C9C3E1DA7AF8BE1CA1CEB8F9A

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2019-01-05
Build Time     : 25.01.2019
Product Model  : M5
Product Brand  : HOTWAV
Product Manfct : ragentek
Product Info   : M5
Display ID     : T685_T6_S2_DUBAI_2+16_V13_20190122
Product Name   : M5
Product Device : M5
Product Board  : T685
Product Board  : t685_t6_dubai_pcba_39_o1
Board Platform : mt6739

MT6739__ragentek__M5__8.1.0__T685_T6_S2_DUBAI_2+16_V13_20190122__O11019__M5

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 41%
Read : system.img
ExtSparse : Compression ratio : 18%
Read : cache.img
Read : userdata.img

FW Size  : 2.14 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\InfinityBox\CM2MT2 v216\Backup\MT6739__ragentek__M5__8.1.0__T685_T6_S2_DUBAI_2+16_V13_20190122__O11019__M5\

Done!
Elapsed: 00:04:40

Firmware Flash CLONE Huawei Nova 7 PRO | COPY/CLONE l MT6580__alps__nova_7_Pro__nova_7_Pro__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

 

Brand     : alps
ProdName  : nova_7_Pro
ProdModel : nova 7 Pro
Device    : nova_7_Pro
AndroidVer: 5.1
CU_SWVer  : V1.1.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

 V207IF3_HDPLUS1600_L_V1.0_1_8_20201021_2131_V1.1.0_B125_CX_K25P_WELCOME_NOVA_7PRO

 pass :  now-a7proboss

 

Bahan :
1. Download ROM Firmware CLONE Huawei Nova 7 PRO  Scatter File

•  Download Rom MT6580__alps__nova_7_Pro__nova_7_Pro__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Read Firmware Flash Copy Huawei Nova 7 PRO

 

Log read info Firmware Flash CLONE Huawei Nova 7 PRO | COPY/CLONE 

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D420037EC544E92FB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D420037EC544E92FB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDE0555BEBA95AE75A390D0B49
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName  : nova_7_Pro
ProdModel : nova 7 Pro
Device    : nova_7_Pro
AndroidVer: 5.1
CU_SWVer  : V1.1.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

SECURITY :
IMEI_SW [1] : 35767
IMEI_SW [2] : 35767
BTMAC Addr  : 123456789C48
WiFi MAC    : 20720D390371

MODEM :
BaseBand  : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P8_1_wg_n

EXTRA :
LCD : Not info available :(
LCD Res : M_HEIGHT=1600xM_WIDTH=720
TOUCH [0] : STOM_KERNEL_TOUCHPANEL=gsl915
CAM [0] : STOM_HAL_IMGSENSOR=imx190s_mipi_raw
CAM [1] : gc2355s_mipi_raw
CAM [2] : ov9762_mipi_raw
CAM [3] : ov9760_mipi_raw
CAM [4] : imx190_mipi_raw
CAM [5] : ov5648_mipi_raw
CAM [6] : ov9760m_mipi_raw
CAM [7] : ov9762m_mipi_raw
CAM [8] : gc2385mipi_raw
CAM [9] : ov8865_mipi_raw
MODEM : STOM_MODEM=hct6580_we_a_l_hspa_b1b2b4b5b8_coclk_RTM7289-5_2sim_hotplug_v199F
LOCALE : K_PRODUCT_LOCALES=en_US es_ES ar_EG fa_IR pt_BR pt_PT fr_FR ru_RU tr_TR el_GR vi_VN my_ZG es_US tl_PH th_TH de_DE de_AT in_ID ms_MY zh_CN it_IT it_CH km_KH hi_IN bn_BD pl_PL

Done!
Elapsed: 00:00:19

Firmware NOTE 10 / 10+ N-SERIES | MTK6763 FAKE | MT6572__alps__note10+__x6_v5_x50__4.4.2__HY_W116_M405_Z

 

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : note10+
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_M405_Z

FIX LCD GARIS - GARIS 

pass :    note-10plus

Bahan :
1. Download ROM Firmware NOTE 10+  Scatter File

•  Download Rom MT6572__alps__note10+__x6_v5_x50__4.4.2__HY_W116_M405_Z
•  Download MT6572__alps__note10+__x6_v5_x50__4.4.2__HY_W116_M405_Z_NEW_V2

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

•  UNTUK YG NOTE_10_10+_x6_v5_x50__4.4.2_HY_W106_W20_Z DOWNLOAD DISINI
  

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

Cara Flash note10+

 

Log Read Firmware NOTE 10+ N-SERIES

 Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D00093E37F0AFD7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00093E37F0AFD7
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567FD64406997876C206FBBFB5D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : note10+
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_M405_Z

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 808 MiB
Scatter saved to : D:\ANDROID LAIN2\n-series\note 10+\New folder\MT6572__alps__note10+__x6_v5_x50__4.4.2__HY_W116_M405_Z\

All done!

Done!
Elapsed: 00:04:07

 

 

Firmware Flash Infinix X5515F | MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0

 

Patch Level    : O11019
Display ID     : X5515F-H398F-O-180531V89
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 31.05.2018
Product Brand  : Infinix
Product Name   : H398
Product Device : Infinix-X5515F
Product Model  : Infinix X5515F
Product Manfct : INFINIX MOBILITY LIMITED
Product Board  : x5515c_h398
Board Platform : mt6739

MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019

Bahan :
1. Download Firmware  Infinix X5515F scatter file

•  Download Rom Firmware MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019
• NVRAM INFINIX X5515F
  

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Read Firmware Flash Infinix X5515F

Log Read Firmware Infinix X5515F

Operation : Read Firmware [ v2.16 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Zion
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
BROM : SOCID : 7A2A873AF6742F68A891E853B471F701702C2B74E16FF977F89F52370E98A494
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514536334D42033DD2D22B45F1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 90D5A5FD600D86403414241E115C6FDF

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : X5515F-H398F-O-180531V89
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 31.05.2018
Product Brand  : Infinix
Product Name   : H398
Product Device : Infinix-X5515F
Product Model  : Infinix X5515F
Product Manfct : INFINIX MOBILITY LIMITED
Product Board  : x5515c_h398
Board Platform : mt6739

MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 21%
Read : system.img
ExtSparse : Compression ratio : 45%
Read : cache.img
Read : userdata.img

FW Size  : 2.11 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\InfinityBox\CM2MT2 v216\Backup\MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019\