Lenovo P1ma40 Fix BLUE SCREEN abis Flash

CATATAN : Abis flash pake rom P1ma40_S025_150924_16G_ROW malah jadi BLANK BIRU, ada nada masuk, hp juga standby

Cara : flash dulu pake LK ONLY, bila muncul logo bru exe pake yg full rom
pass :  p1ma40-joss
Bahan :
1. Download Firmware

• TEST LK ONLY (nopassword) atau download disini
• Full ROM Lenovo P1ma40_TRUE_BUATFIX_BLUESCREEN

2. Download SP-Flash-Tool Wajib pake versi SP_Flash_Tool_v5.1352.01 Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass WA / sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Log read info rom lenovo p1ma40
Start  at : [7/25/2018 / 8:12:56 PM]
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D33323862050042F730C0B4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42000562B4C0B2F7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDCA73291E9DCF9F88BF851A63
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Lenovo
ProdName  : P1ma40
ProdModel : Lenovo P1ma40
Device    : P1ma40
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : P1ma40_S_USR_S010_1608241530_MP3V2_16G_ROW_US

SECURITY :
IMEI_SW [1] : 868851020037112
IMEI_SW [2] : 868851020037120
BTMAC Addr  : 000046033501
WiFi MAC    : 000000000000

MODEM :
BaseBand  : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P3_1_lwg_n

EXTRA :
LCD : Not info available :(
LCD Res : 1280x720
TOUCH [0] : FT5446
CAM [0] : ov8865_mipi_raw
CAM [1] : ov8865_mipi_raw_sunny
CAM [2] : hi551_mipi_raw
CAM [3] : hi551avc_mipi_raw
MODEM : wingtech5335_lte_l_lwg_dsds_wt_pa_sky77643_98735a
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:37
Reconnect Power/Cable!

 

Repair Redmi 4A Qualcomm HS-USB Diagnostic 9008

Repair Redmi 4A mode 9008

Hal ini terjadi biasanya karena kesalahan pada waktu flashing, sehingga muncul mode 900E yang mengakibatkan Resmi 4A menjadi Matot.

Bahan :
1. Pinset
2. Firmware Redmi 4A (Pilih ROLEX GLOBAL) DOWNLOAD DISINI
3. Kompi/Lappy 64-BIT (saya tested disini)
4. Miflash terbaru 

Cara kerja :
1. Buka Casing
2. Copot pin Baterai
3. Hubungkan titik TP seperti gambar dengan pinset, atau dengan jumper langsung

4. Buka device manager ( lihat di video di bawah)
5. Posisi pin TP terhubung masukkan kabel usb yang sudah tertancap di PC, sambil lihat port com sudah berubah ke 9008, kalau belum lakukan berulang-ulang sampai terdeteksi 9008
6. Bila sudah terdetek 9008, buka Miflash, refresh, COM sudah muncul
7. Masukkan file, pada folder images (lihat video dibawah)
8. Flash, tunggu sampe Done

Cara Flash Redmi 4A Detect Qualcomm HS-USB Diagnostic 9008

Identify Redmi 4A Rolex
Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 00239F4F
ID_BLOCK_I : 000560E1
ID_BLOCK_L : CF881B37858C7427AE228EF96DD92116
ID_BLOCK_L : ED0B61C0172620FEF9408184F36BB7EA
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!


Brand     : Xiaomi
ProdName  : rolex
ProdModel : Redmi 4A
Device    : rolex
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8937

Done!
Elapsed: 00:00:23

Flash Redmi Note 2 2015056 BI Bahasa Indonesia & Bypass Micloud

Micloud Redmi Note 2   ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx


Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P197

Flash Redmi Note 2 2015056 BI Bahasa Indonesia + Bypass Micloud


Bahan :

1.  Download  Redmi Note 2 2015056 BI DOWNLOAD DISINI
2.  Atau bisa pakai rom redmi note 2 2015052  DOWNLOAD
3.  Download Flash Tool DOWNLOAD DISINI
4.  Driver bila belum punya instal dulu driver mtknya
5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

BACA JUGA :

• Flash Redmi Note 2 2015052 / 2015712 4G BI / Bahasa Indonesia & Bypass Micloud
• Firmware Flash Redmi Note 2 Prime 2015051 BI/Bahasa Indonesia & Bypass Micloud

Flash Redmi Note 2 2015056 via SP Flash Tool

 Log Read Firmware Redmi Note 2 2015056

Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303332473734009EE8B353A27D
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 110100303332473734009EE8B353A27D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : EA8223CB18D145910A9F71A11A44E39F
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P197

[Read Ok] : preloader_lcsh6795_lwt_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2089 MiB
Scatter saved to : G:\andro3\xiaomi\note 2 2015056\MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P197\kangsuper.blogspot.co.id
All done!

Done!
Elapsed: 00:09:43

Flash Xiaomi HM Note 1W 2013121 Bahasa Indonesia

 pokoknya diback sticker ada tulisan 2013121

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.46
Firmware Xiaomi HM Note 1W 2013121 BI atau Bahasa Indonesia

Bahan :

1.  Download Firmware Stock Rom BI MIUI 7 HM NOTE 1W 2013121 atau Download DISINI
2.  Download Firmware Stock Rom BI MIUI 8 atau Download Disini
3.  Download Firmware Custom BI Pussy Fap HM NOTE 1W 2013121 atau Download Disini
4.  Download Flash Tool DOWNLOAD DISINI
5.  Driver bila belum punya instal dulu driver mtknya
6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
7.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Install Playstore dkk pake INI

Buat yang selalu berhenti waktu flashing di 1%-7% silahkan menggunakan ROM ke-2 MIUI 8 atau dengan cara dibawah ini :
DOWNLOAD DULU FILENYA DISINI atau Download Disini

1. Flash menggunakan file ke-3 yg custom pussy, UNCEK PRELOADER, SYSTEM, CACHE, USERDATA, seperti gambar dibawah :

2. Copy file tadi ke mmc, Masuk Recovery, volume down + on
3. WAJIB Wipe dulu
4. Pilih install from sdcard
5. Done
note : file custom
JANGAN FORMAT VIA FLASH TOOL

BACA JUGA :

• Bypass Micloud & Flash Redmi 4X ~ DONE tested 
• Flash & Bypass Micloud Redmi 4A ~MUST BE DONE!!!
• Flash & Bypass Micloud Redmi 4 Prada (2016090) & Markw (2016060)

Flash Xiaomi HM Note 1W via Flash Tool

Log Read Firmware HM Note 1W
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384732640405015E53035143
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A48384732640405015E53035143
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 6CCDCF5A83C7DAC1AB11ED018BA8AC19
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.46

[Read Ok] : preloader_lcsh92_wet_jb9.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / lcsh92_wet_jb9 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 922 MiB
Scatter saved to : G:\andro3\xiaomi\2013121\bi\MT6592__Xiaomi__HM_NOTE_1W__lcsh92_wet_jb9__4.4.2__ALPS.KK1.MP1.V2.46\

All done!

Repair Lenovo A319 DRAM FAIL 4032

Brand     : Lenovo
ProdName  : A319
ProdModel : Lenovo A319
Device    : A319
AndroidVer: 4.4.2
MTKxCPU   : MT6572
Repair Lenovo A319 BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

Firmware ini hanya khusus untuk repair lenovo a319 yang mengalami DRAM FAIL 4032 setelah flashing done 100%. Setelah flashing selesai a319 tidak bisa hidup kemudian akan di flash lagi tapi muncul notifikasi BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032), sehingga a319 tidak bisa di flash lagi. Bukan untuk a319 yang error pada ic emmc atau hardware.

Bahan :

1.  Download Firmware Repair Lenovo A319 DRAM FAIL 4032 atau download disini
2.  Download Flash Tool DOWNLOAD DISINI
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI), Mahar pulsa 10k

Cara Kerja :

1. Flash menggunakan firmware dalam folder rep dram failed a319, centang semua, klik download
2. Setelah selesai a319 anda akan hidup tapi stuck dilogo
3. Flash lagi menggunakan firmware di dalam folder A319_ROW XXX(tanpa system), uncek preloader
4. Done, hidupkan a319 anda, bila keluar nada loading maka hape anda sudah ok, tunggu loading 10menit.
5. Buat yg diflash tetap tidak mau hidup, centang semua, silahkan flash pake firmware upgrade

Atau lihat Video dibawah untuk jelasnya

Log Read firmware Lenovo A319

[AP] : Initial info read Ok!

Brand     : Lenovo
ProdName  : A319
ProdModel : Lenovo A319
Device    : A319
AndroidVer: 4.4.2
MTKxCPU   : MT6572

MODEM :
BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n

EXTRA :
LCD [0] : ili9806e_dsi_vdo_dijing
LCD [1] : otm8019a_dsi_vdo_dijing
LCD [2] : ili9806c_dsi_vdo_dijing
LCD Res : 800x480
TOUCH [0] : ft6206
TOUCH [1] : GT9XX
CAM [0] : ov5645_mipi_yuv
CAM [1] : gc2035_yuv
CAM [2] : hi257_yuv
MODEM : HUAQIN72_CWET_1A_KK_HSPA_MASTER_0113
LOCALE : en_US zh_CN zh_TW zh_HK ru_RU fr_FR tr_TR in_ID ms_MY vi_VN ar_EG  th_TH el_GR hu_HU ro_RO cs_CZ bg_BG hr_HR sk_SK uk_UA sl_SI bn_IN sr_RS fa_IR hi_IN pt_PT

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!

Finish at : [12/16/2015 / 8:06:13 PM]

Start  at : [12/16/2015 / 8:06:36 PM]
Operation : Read Flash [ v1.39 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473261110177D3B1C172C3
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110177D3B1C172C3
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : Lenovo
ProdName  : A319
ProdModel : Lenovo A319
Device    : A319
AndroidVer: 4.4.2
MTKxCPU   : MT6572


[Read Ok] : preloader_huaqin72_cwet_1a_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / huaqin72_cwet_1a_kk / EMMC
FW Size : 1443 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__Lenovo__Lenovo_A319__A319__4.4.2\

All done!

Done!
Elapsed: 00:06:22

Flash Redmi Note 2 2015052 / 2015712 4G BI / Bahasa Indonesia & Bypass Micloud

Micloud Redmi Note 2 ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

Tested buat Note 2 MTK BUILD 2015052 & 20150712
Buat micload note 2 mtk juga ok, Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

 Xiaomi redmi note 2 (2015052)  mtk 4G/LTE,
1. Firmware tidak BI., tapi semua lengkap termasuk playstore dkk.
2. Firmware BI lengkap dg Playstore DKK
Bahan :

1. Firmware  No bi, firmware stock rom redmi note 2 2015052 /2015712  DOWNLOAD DISINi
2. Firmware BI redmi note 2 2015052 /2015712 DOWNLOAD
3. Download Flash Tool DOWNLOAD DISINI
4. Driver bila belum punya instal dulu driver mtknya 
5. Untuk tutorial flash via Flash tool bisa dilihat DISINI 
Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



NOTE : 
1. PAKE FLASH TOOL  BATRAY DICOPOT
2. PAKE MI FLASH, Masuk Fastboot Volume down + on
3. Setelah flash selesai, setting BI, trus seting negara ke Hongkong
4. Untuk Firmware BI, bisa pake Miflash spt video dibawah, atau menggunakan flash tool, scatter ada didalam folder images
5. Untuk Bypass Micloud tinggal Flash aja, micloud akan terbypass

BACA JUGA :

• Flash Redmi Note 2 2015056 BI Bahasa Indonesia & Bypass Micloud
• Firmware Flash Redmi Note 2 Prime 2015051 BI/Bahasa Indonesia & Bypass Micloud
• Flash & Bypass Micloud Redmi 5S (2015711) & 5S PLUS (2016070)

 Flash Redmi Note 2 via Flash tool

About Redmi Note 2 2015052

 Log Read Firmware Redmi Note 2 2015052

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6795
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] Helio[X10]|MT6795_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053445731364701B70E4778A203
DA Stat : v3.2 on BBID : 0x92
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G61WD
[eMMC] : FLASH_CID : 45010053445731364701B70E4778A203
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

MODEM :
BaseBand  : MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P27_1_ltg_n

EXTRA :
LCD [0] : nt35596_fhd_dsi_vdo_tianma
LCD [1] : nt35596_fhd_dsi_vdo_auo
LCD [2] : nt35532_fhd_dsi_vdo_boe
LCD Res : 1920x1080
TOUCH [0] : ft5346
TOUCH [1] : atmel336t
CAM [0] : s5k3m2_mipi_raw
CAM [1] : s5k3m2_2nd_mipi_raw
CAM [2] : ov5670_mipi_raw
CAM [3] : ov5670_2nd_mipi_raw
CAM [4] : ov5670_flt_2nd_mipi_raw
MODEM : STOM_MODEM =lcsh6795_lwt_l_lttg_open_market_5m lcsh6795_lwt_l_lwg_open_market_5m
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

Finish at : [1/25/2016 / 2:13:22 AM]

Start  at : [1/25/2016 / 2:13:35 AM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6795
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] Helio[X10]|MT6795_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053445731364701B70E4778A203
DA Stat : v3.2 on BBID : 0x92
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G61WD
[eMMC] : FLASH_CID : 45010053445731364701B70E4778A203
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

MediaTek MT67xx [x64] : Normalize settings Ok

[Read Ok] : preloader_lcsh6795_lwt_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
FW Size : 1554 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\normal\MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129\

All done!

ANDROMAX Z EG680 FIX KAMERA & SENTER

NO PASS / FREE

ANDROMAX Z EG680 FIX KAMERA & SENTER

Kebanyakan setelah diflash karena rom gak cocok, kamera menjadi hilang dimenu, dan senter gak bisa dipake. Flash aja pake CWM njar juga nongol lagi kamera ma senter di Andromax Z kamu.

1.  Download firmwarenya DISINI atau Disini
2.  Download Flash Toolnya DOWNLOAD DISINI
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5.  DOWNLOAD CWM dan FLASH VIA FLASHTOOL 
6.  Copy file ke mmc FLASH VIA CWM

CEK KAMERA

CEK SENTER

Chinese Miracle II  [MTK module] v 1.40

Start  at : [2/10/2016 / 2:40:37 AM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 484A019064324738A5010304DBB0E1C6
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040301A5C6E1B0DB
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : Smartfren
ProdName  : eg980ae
ProdModel : EG680
Device    : eg980ae
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.EVDO.MP.V1.7

[Read Ok] : preloader_eg980ae.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / eg980ae / EMMC
FW Size : 734 MiB
Scatter saved to : F:\android2\andromax\EG680\MT6589__Smartfren__EG680__eg980ae__4.2.1__ALPS.JB2.EVDO.MP.V1.7\

All done!

Done!
Elapsed: 00:03:39
Reconnect Power/Cable!

Finish at : [2/10/2016 / 2:44:17 AM]