Flash Sunberry S7 MT6572 Nand

Device Brand   : S7
Device Model   : S7
Device CPU     : MT6572
Device IntName : S7
Device Version : 4.4.2
Device Compile : 3/29/2017 6:35:06 AM
Device Project : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Device ExtInfo : S7
Note : Cek fisik, samakan dengan photo yang kami upload

Bahan :

1. Download  Firmware FULL Sunberry S7 atau Download Disini
2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Flash Sunberry S7 via Flash Tool

Log Read Firmware Sunberry S7
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xFCC4CFBD7459CAB2A42CEEEF5EC45E1B
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
[Read Ok] : preloader_q3_m144_b18_gt019_s7world.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / q3_m144_b18_gt019_s7world / NAND
FW Size : 296 MiB

Brand     : S7
ProdName  : S7
ProdModel : S7
Device    : S7
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Android Info saved
Scatter saved to : D:\sunberry\s7\MT6572_NAND_S7__S7__S7__4.4.2__Q3_HS_GT013_S7_V0.7_M44_B18_20170329

Done!

Flash & Firmware Lava Iris 870

MTKxCPU: MT6735
ProdName: iris870
ProdModel: iris870
Device: iris870
AndroidVer: 6.0
Brand: Lava
MTKxPRJ: alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6
DisplayID: LAVA_iris870_INT_S120_17E04
BoardID: iris870
BuildDate: Thu May 11 10:00:44 CST 2017

Bahan :

pass : 870-irisok

1.  Download  Firmware Scattter Full Lava IRIS 870  atau Download Disini
2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Flash Lava Iris 870 via Flash Tool

Log Read Firmware Lava Iris 870
12:12:39 Connecting...
12:12:39 CPU TYPE:MT6735
12:12:39 Hardware version:CB00
12:12:39 Software version:0000
12:12:39 SecCfgVal :0x00000000
12:12:39 BromVersion :0xFF
12:12:39 BLVersion :0x01
12:12:40 Boot downloading...
12:12:44 EMMC_ID:0x150100513832334D42009594F22573E5
12:12:44 EMMC_PRODUCT_NAME: 0x513832334D42
12:12:44 EMMC_BOOT1_SIZE: 0x00400000
12:12:44 EMMC_BOOT2_SIZE: 0x00400000
12:12:44 EMMC_PRMB_SIZE: 0x00400000
12:12:44 EMMC_GP1_SIZE: 0x00000000
12:12:44 EMMC_GP2_SIZE: 0x00000000
12:12:44 EMMC_GP3_SIZE: 0x00000000
12:12:44 EMMC_GP4_SIZE: 0x00000000
12:12:44 EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
12:12:44 
12:12:44 INT RAM: 128KB SDRAM    EXT RAM: 2GB DRAM
12:12:44 Finding partition.
12:12:44 MTKxCPU: MT6735
12:12:44 ProdName: iris870
12:12:44 ProdModel: iris870
12:12:44 Device: iris870
12:12:44 AndroidVer: 6.0
12:12:45 Brand: Lava
12:12:45 MTKxPRJ: alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6
12:12:45 DisplayID: LAVA_iris870_INT_S120_17E04
12:12:45 BoardID: iris870
12:12:45 BuildDate: Thu May 11 10:00:44 CST 2017
12:12:45 
12:12:45 Empty/useless files we will reduce it.
12:12:45 
12:12:45 Reading  lk.bin .
12:12:45 Reading  boot.img .
12:12:47 Reading  recovery.img .
12:12:49 Reading  logo.bin .
12:12:50 Reading  secro.img .
12:12:51 Reading  trustzone.bin .
12:12:51 Reading  trustzone.bin .
12:12:52 Reading  system.img .
12:19:43 Reading  BPLGUInfo .
12:19:45 Reading  userdata.img .
12:19:47 Reading  cache.img .
12:19:48 
12:19:48 Android_Info.txt create success.
12:19:48 File save path:D:\lava\lava 870\New folder (2)\MT6735_iris870_6.0_Lava_alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6_2018-03-03 13_12_45\
12:19:48 Elapsed time: 00:07:18.

Flash Polytron R2502 White & Red

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

Bahan :
1. Download Firmware PAC Polytron R2502

•  Download Firmware PAC Polytron R2502 White atau Download Disini

 

•  Download Firmware PAC Polytron R2502 Red atau Download Disini

 

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash Polytron R2502 via Research Download

Log Read Firmware Polytron R2502
Start  at : [3/23/2017 / 8:57:54 PM]
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
 ====  Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1071 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_scx35_sp7731gea_4.4.2_Polytron.B1B8.007.20151102_Polytron_R2502\
Done!

Flash, Firmware & BYPASS FRP Mito A69

Model Name  : s7358_qhd_lmplus_dt_Multi
Model Brand : MITO_A69
Model Device: scx35_s7358_qhd_lm
AndrVersion : 5.1
BaseBand CPU: S7358_QHD_LM
Project Ver : MITO_A69_07-09-2016_V10
Model Ext   : MITO_A69

Bahan:

DOWNLOAD BYPASS FRP ONLY / BYPASS AKUN GOOGLE ~ MITO A69

• Download PAC MITO_A69_V10_BYPASS_FRP ONLY atau Download Disini (1MB)
• Download PAC MITO_A69_V14_BYPASS_FRP ONLY atau Download Disini (1MB)

1. Download Firmware PAC FULL Mito A69 v10 atau Download disini

2. Download Firmware PAC FULL Mito A69 v14 atau Download disini

3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Kerja :

• Untuk FRP tinggal pake PAC BYPASS FRP ONLY
• Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
• Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
• Boot volume (- /+)
• Flash  Mito A69 via research Download, flash aja dgn rom diatas + BYPASS FRP
• Buat mito A69 V08 : MITO_A69_16112016_V08 silah kan pake A69 versi 014 => klo berhenti disystem, flash pake v14 tanpa system, selesai baru flash pake system, DONE

Model Name  : sp7731g_s7358_qhd_lm_oversea
Model Brand : HOTWAV
Model Device: scx35_s7358_qhd_lm
AndrVersion : 6.0
BaseBand CPU: S7358_QHD_LM
CompileDate : 11/19/2016 8:40:13 AM
Project Ver :
Model Ext   : MITO_A69

Cara Flash  Mito A69 via Research Download

Log Read Firmware Mito A69
Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : s7358_qhd_lmplus_dt_Multi
Model Brand : MITO_A69
Model Device: scx35_s7358_qhd_lm
AndrVersion : 5.1
BaseBand CPU: S7358_QHD_LM
Project Ver : MITO_A69_07-09-2016_V10
Model Ext   : MITO_A69
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
Skip [EMP] : FBOOTLOGO
Skip [EMP] : FBOOTLOGO3
Skip [EMP] : FBOOTLOGO4
Skip [EMP] : FBOOTLOGO5
Skip [EMP] : FBOOTLOGO6
Skip [EMP] : FBOOTLOGO7
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1331 MiB
Saved to : E:\andro 1\mito\mito a69\New folder\S7358_QHD_LM_scx35_s7358_qhd_lm_5.1_MITO_A69_07-09-2016_V10_MITO_A69\
Done!

Flash Brandcode B11 ~ Fix LCD Buram After Flash

Brandcode B11 BP237_Brandcode_V2.1_20161119
Model Name  : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext   : B11

Brandcode V2.1 diflash pake V1.0, alhasil LCD jadi Burem kemudian gelap, tapi muncul suara.

Bahan:

PASS: bcode-11sip

1. Download Firmware PAC Brandcode B11

• Firmware Brandcode B11 V2.1 atau Download disini
• Firmware Brandcode B11 V1.0 atau Download disini
• Firmware Brandcode B11 V2.0 atau download disini
• BUAT FIX BLUESCREEN PAKE INI DOWNLOAD B11 FIX BLUESCREEN

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini


Note :
1. BOOT Volume +
2. Samakan versi
3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot


Cara Flash  Brancode B11 via Research Download

Log Read Firmware Brandcode B11
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- >Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext   : B11
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2329 MiB
Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
Done!

Flash Strawberry S8 SP7731

Strawberry S8
Model Name  : H100
Model Brand : S8
Model Device: H100
AndrVersion : 5.0.1
BaseBand CPU: H100
Project Ver : H100 14B_test-keys
Model Ext   : S8

Bahan:
1. Download Firmware PAC Strawberry S8 atau Download disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash  Strawberry S8 via Research Download

Log Read Firmware  Strawberry S8
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : H100
Model Brand : S8
Model Device: H100
AndrVersion : 5.0.1
BaseBand CPU: H100
Project Ver : H100 14B_test-keys
Model Ext   : S8
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 772 MiB
Saved to : E:\andro 1\strawberry\s8\H100_H100_5.0.1_H100_14B_test-keys_S8\
Done!

Flash Advan S50D Build Number : WG5016/C12_J_V4.0B/KitKat4.4

Model Name  : revo_6408
Model Brand : ADVAN
Model Device: S50D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_HD
Project Ver : WG5016_ADVANS50D_V03_20151105
Model Ext   : S50D

Bahan :
1. Download Firmware PAC S50D V03 Build Number : WG5016/C12_J_V4.0B/KitKat4.4

•  Advan S50D_V0.3 atau Download Disini

2. Download Firmware PAC S50D V01 dan V04

• Advan S50D_V0.1 atau Download Disini
• Advan S50D_V0.4 atau Download Disini

3. Buat yang abis di flash ADVAN S50D Blank putih, pake S50D V05

• Advan S50D V0.5 atau download disini

4. Download Research Download R2.10
5. Driver SPD by InfinityBox
6. Turorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan S50D via Research Download

Log Read Firmware Advan S50D
[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : revo_6408
Model Brand : ADVAN
Model Device: S50D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_HD
Project Ver : WG5016_ADVANS50D_V03_20151105
Model Ext   : S50D

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 890 MiB
Saved to : E:\andro 1\advan\s50d v3\SP7731GEA_HD_S50D_4.4.2_WG5016_ADVANS50D_V03_20151105_S50D\
Done!

Cara Flash Mito A72 SC7731

Model Name  : sp7731geahdrplusoversea
Model Brand : MITO
Model Device: scx35_sp7731gea_hd
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : MITO_A72_ANDROID_5.1_T14_20150825
Model Ext   : MITO_A72

PASS :okmito-a72

1. Download Firmware PAC Mito A72

•  Firmware PAC Mito A72 (T08) atau Download Disini
•  Firmware PAC Mito A72 (T14) atau Download Disini
•  Firmware PAC Mito A72 (T15) atau Download Disini
•  Firmware PAC Mito A72 (T19) REPAC atau Download Disini
•  Firmware PAC Mito A72 (T19) atau Download Disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash Mito A72 via Research Download

Log Read Firmware Mito A72
Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : MITO
Model Device: scx35_sp7731gea_hd
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : MITO_A72_ANDROID_5.1_T14_20150825
Model Ext   : MITO_A72

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1285 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_HDR_scx35_sp7731gea_hd_5.1_MITO_A72_ANDROID_5.1_T14_20150825_MITO_A72\
Done!

Flash Advan S50G V0.1 & V0.2

Model Name  : revo_3204
Model Brand : ADVAN
Model Device: S50G
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : WG5022_S50G_V0.1_20150828
Model Ext   : S50G

Bahan :
1. Download Firmware PAC

•  Advan S50G_V0.1 atau Download Disini
•  Advan S50G_V0.2 atau Download Disini
•  Advan S50G_V0.2_20151112 atau Download Disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan S50G via Research Download

Log Read Firmware Advan S50G
Operation : Read FullFlash

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!


Model Name  : revo_3204
Model Brand : ADVAN
Model Device: S50G
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : WG5022_S50G_V0.1_20150828
Model Ext   : S50G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 839 MiB
Saved to : G:\InfinityBox\CM2SPD\Flash\SP7731GEA_S50G_4.4.2_WG5022_S50G_V0.1_20150828\
Done!

Flash Advan S4i TCS4036A/C22B/Kitkat4.4

 Advan S4i TCS4036A/C22B/Kitkat4.4

Model Name  : n9_sc7715ga_0402
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : TCS4036_ADVAN_S4i_V4.0_20151012
Model Ext   : S4i


TCS4036_ADVAN_S4i_V4.0_20151012
TCS4036_ADVAN_S4i_V5.0_20151123

Bahan :
1. Download Firmware PAC

•  Advan S4i TCS4036A/C22B/Kitkat4.4 V4 atau Download V4 Disini
•  Advan S4i TCS4036A/C22B/Kitkat4.4 V5 atau Download V5 Disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan S4i via Research Download

Log Read Firmware Advan S4i
Operation : Read FullFlash [ v1.16 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
 ====  Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!
[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : n9_sc7715ga_0402
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : TCS4036_ADVAN_S4i_V4.0_20151012
Model Ext   : S4i
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img
AndroidInfo created
Firmware Size : 343 MiB
Saved to : G:\andro3\ADVAN\advan s4i\SCX15_SP7715GA_[NAND_b256k]_Vandroid_4.4.2_TCS4036_ADVAN_S4i_V4.0_20151012_S4i\
Done!

Firmware Maxtron Amor Flash tool

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

1.  Download Firmware Maxtron Amor
2.  Download Flash Tool DOWNLOAD DISINI
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Amor via Flash tool

Log Read Firmware Maxtron Amor
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048603A2668090F1
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A2668090F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 115404C62466D68A621B88FE17633564
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 690 MiB
Scatter saved to : G:\andro3\maxtron\amor\MT6572__Maxtron__AMOR__himax_s451_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Firmware Flash Maxtron Apollo & Apollo V12 ~ MTK

  Maxtron Apollo

Brand     : YUSUN
ProdName  : Maxtron-Apollo
ProdModel : Maxtron-Apollo
Device    : Maxtron-Apollo
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.6

Bahan:

1. Firmware Maxtron  Apollo

• MT6582__YUSUN__Maxtron-Apollo__Maxtron-Apollo__4.2.2__ALPS.JB5.MP.V1.6 atau download disini

2. Firmware Maxtron  Apollo V12

• MT6580_MAXTRON_APOLLO_V12_20170807_SIGN atau download disini
  
  

3. TOOL

1. Download Flash Tool DOWNLOAD DISINI
2. Driver bila belum punya instal dulu driver mtknya
3. Untuk tutorial flash via Flash tool bisa dilihat DISINI 
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Baca juga  :

• Flash & Firmware Maxtron V15 SPD
• BYPASS FRP & FLASH Maxtron V13 ~ Cepat dan Simple

Flash Maxtron Apollo via Flash Tool

Log Read Firmware Maxtron Apollo
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D42017DE4CC91B033
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42017DE4CC91B033
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567FAED00849F93171ED3576207
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : YUSUN
ProdName  : Maxtron-Apollo
ProdModel : Maxtron-Apollo
Device    : Maxtron-Apollo
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.6

[Read Ok] : preloader_huaqin82_wet_b2d_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / huaqin82_wet_b2d_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 548 MiB
Scatter saved to : F:\andro3\maxtron\apollo\MT6582__YUSUN__Maxtron-Apollo__Maxtron-Apollo__4.2.2__ALPS.JB5.MP.V1.6\

All done!

Firmware Flash Gpad Excellent 4 Tab

 Tab Gpad Excellent 4
Brand     : Gpad
ProdName  : ratech72_wet_rlk_jb3
ProdModel : Gpad Excellent 4 Tab
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : Gpad.Excellent.4.Tab.V04

Bahan :

1.  Firmware Gpad Excellent 4 Tab V.04
2.  Download Flash Tool DOWNLOAD DISINI
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k 

Flash Gpad Excellent 4 Tab via Flash tool

Log Read Firmware Gpad Excellent 4 Tab
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201721CD83F418B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201721CD83F418B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : EA6E8066A433E6D547D5FD16B7E70F9F
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Gpad
ProdName  : ratech72_wet_rlk_jb3
ProdModel : Gpad Excellent 4 Tab
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : Gpad.Excellent.4.Tab.V04

[Read Ok] : preloader_ratech72_wet_rlk_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 821 MiB
Scatter saved to : F:\andro3\gpad\excellent 4 tab\New folder\MT6572__Gpad__Gpad_Excellent_4_Tab__ratech72_wet_rlk_jb3__4.2.2__Gpad.Excellent.4.Tab.V04\

All done!