Firmware Flash Mito T89 V2 T03

 Mito T89 V2 3G T03

Model Name  : sp7731geaplus_k03_whxmito_64_4_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_32_4
Project Ver : LMY47D release-keys
Model Ext   : MITO_T89

Bahan :
1. Download Firmware PAC  Flash Mito T89 V2 3G SC7731 T03 atau Download Disini
2. Download Firmware PAC MITO_T89 v2_3G_201604061542_TN7 atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara  Flash Mito T89 V2 T03

Log Read Firmware Mito T89 T03
 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_whxmito_64_4_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_32_4
Project Ver : LMY47D release-keys
Model Ext   : MITO_T89

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1533 MiB
Saved to : F:\andro3\mito\t89\v2\SP7731GEA_K03_WHXMITO_32_4_scx35_sp7731gea_k03_whxmito_64_4_5.1_LMY47D_release-keys_MITO_T89\
Done!