kangsuper

Minggu, 03 Januari 2016

FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT




Brand     : AXIOO
ProdName  : PICOpad 7H
ProdModel : PICOpad 7H(GGF1)
Device    : PICOpad 7H
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.44

FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT

FIRMWARE BUAT MTK 6572

  Bahan:

  1. FIRMWARE MTK 6572 DOWNLOAD STOCK ROM AXIOO PICOpad 7H 4.4.2 atau Download Disini
  2. FLASH TOOL DOWNLOAD DISINI
  3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Axioo 7H yang lain

  1. BUAT AXIOO PICOpad 7H MT6582 KELINK INI
  2. BUAT Axioo Picopad S1 atau 7H GGB MT6582


Start  at : [12/25/2015 / 10:19:01 PM]
Operation : Check / Read Info [ v1.39 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : FE014E4D4D433038473F00400015AFB5
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , G80CM
[eMMC] : FLASH_CID : FE014E4D4D433038473F00400015AFB5
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D5000000
[eMMC] : FLASH_UCP : 7504 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : AXIOO
ProdName  : PICOpad 7H
ProdModel : PICOpad 7H(GGF1)
Device    : PICOpad 7H
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.44

MODEM :
BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V72_1_wg_n

EXTRA :
LCD [0] : $(ROCO_CUST_LCM)
LCD Res : $(ROCO_LCM_HEIGHT)x$(ROCO_LCM_WIDTH)
TOUCH [0] : $(ROCO_TP)
CAM [0] : $(ROCO_MAIN_CAM)
CAM [1] : $(ROCO_SUB_CAM)
MODEM : TS_SIM2_3G_900
LOCALE : $(ROCO_LANGUAGE)

Done!
Elapsed: 00:00:13

Start  at : [12/25/2015 / 10:58:54 PM]
Operation : Read Flash [ v1.39 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : FE014E4D4D433038473F00400015AFB5
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , G80CM
[eMMC] : FLASH_CID : FE014E4D4D433038473F00400015AFB5
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D5000000
[eMMC] : FLASH_UCP : 7504 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : AXIOO
ProdName  : PICOpad 7H
ProdModel : PICOpad 7H(GGF1)
Device    : PICOpad 7H
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.44

[Read Ok] : preloader_w706.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / w706 / EMMC
FW Size : 933 MiB
Scatter saved to : G:\andro3\axioo\MT6572__AXIOO__PICOpad_7H(GGF1)__PICOpad_7H__4.4.2__ALPS.KK1.MP7.V1.44\

All done!

Done!
Elapsed: 00:05:25







18 komentar:

  1. lain kali klw untuk dijual langsung ditulis no free, atau for sale!!!
    jangan ud didownload baru pake password, kurang ajar namanya tu.

    BalasHapus
    Balasan
    1. biasakan baca artikel sampai bawah / habis

      Hapus
  2. gk gratis ternyata, untung udah dapet backupnya. moga sukses gan jualannya

    BalasHapus
  3. modal 10k gak masalah jadi nota, penting firmware ada yang upload, tested bang, sip.

    BalasHapus
    Balasan
    1. bisa bantu paswordnya brother.., soalnya nomor konfirmasinya uda ga aktif lg!!

      Hapus
    2. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      Hapus
  4. Thanks Kang, firmwarenya 100000% work. Ndak rugi keluar modal 10k.

    BalasHapus
  5. dari mana lihat mt6582 atw 6572 gan...wkt kubka tabnya gk ada icnya tulisannya spt itu...

    BalasHapus
    Balasan
    1. didalam kaleng gan, coba samakan dg mesin 6582, saya upload gambar board dilink satunya, benernya buka kaleng ato cek pake tool gan, klo hape hidup coba cek pake mtk droid, thx

      Hapus
  6. gan ada gak firmwarenya picopad s2l 7(3g)?

    BalasHapus
  7. sukses thnx berat mas bos ,,maju trus kangsuper n tetap berkarya

    BalasHapus
  8. bayar 10 rb aja ngomel..??? jadi nota ratusan ribu itu hargai jasa orang bertrima kasih kpada yg upload uda sukur ada yg bagi ilmu thanks gan
    boleh request firmware
    PICOpad S1L 7H(73G)
    nomor bentukan PICOpad_S1L_GGF_SW20160121
    versi pita basis MOLY.WR8W1315.MD.WG.MP.V72,2016/01/04 19:50
    DITUNGGU YA GAN THANKS...

    BalasHapus
  9. mohon bantuan kang,frimware axio picopad 7hl dong kang.....

    BalasHapus

Posting Komentar