kangsuper

Jumat, 24 April 2020

Flash Evercoss GENPRO S50 Matot Abis Flash ~ SCATTER FILE


Catatan: GENPRO S50 sebelum di flash LOGO abis Flash MATOT
salah ROM

Tested Flash via UFI

Bahan :
1. Download Firmware Evercoss GENPRO S50 Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k


Log Flash GENPRO S50 Via UFI

Please "Identify Device" at first, before any other operation.
name: MTK_PLATFORM_CFG
 version: V1.1.2
 platform: MT6737M
 project: len6737m_35_n
 storage: EMMC
 bootChannel: MSDC_0
 blockSize: 0x00020000
MTK Preloader file info.
Found 4 supported eMMC CID:
 [Samsung] R21BMB     15010052 3231424D 42xxxxxx xxxxxxxx
 [Samsung] RX1BMB     15010052 5831424D 42xxxxxx xxxxxxxx
 [SK Hynix] HBG4e     90014A48 42473465 05xxxxxx xxxxxxxx
 [SK Hynix] HBG4a2     90014A48 42473461 32xxxxxx xxxxxxxx
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port(30 s)... Done.
 Detected MTK USB Port (COM18)
 Connection status: EHCI:HUB:HUB:USB 1.16 Full-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.1, date: 1-5-2012
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6735M_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0x05, BL ver: 0x00
 Secure config: 0x01
 SRAM size: 128 KiB
DRAM size: 3 GiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: HBG4e (0x484247346505), rev: 0x07, serial number: 0x98265CE9
Manufacturing date: Oct 2015
CID: 90014A48 42473465 05079826 5CE9A2B7
Capacity: 29.14 GiB(31,285,313,536 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 29.13 GiB(31,272,730,624 bytes)
USB speed: Full-Speed
Switching to USB High-Speed...
 Scanning DA USB High-Speed port... Done.
 Detected DA USB VCOM Port (COM19)
 Connection status: EHCI:HUB:HUB:USB 1.16 High-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Writing preloader at 0x00000000, size: 117.51 KiB... Done.
Writing lk at 0x01C80000, size: 422.92 KiB... Done.
Writing boot at 0x01D80000, size: 8.47 MiB... Done.
Writing recovery at 0x02D80000, size: 10.89 MiB... Done.
Writing logo at 0x03D80000, size: 1.23 MiB... Done.
Writing secro at 0x05200000, size: 132 KiB... Done.
Writing tee1 at 0x06000000, size: 170 KiB... Done.
Writing tee2 at 0x06500000, size: 170 KiB... Done.
 Unsparsing image... Done.
Writing system at 0x0B800000, size: 3.23 GiB... Done.
 Unsparsing image... Done.
Writing cache at 0xDA000000, size: 400 MiB... Done.
 Unsparsing image... Done.
Writing userdata at 0xF3000000, size: 1.50 GiB... Done.
Completed in 8 mins 13.390 s


 

Tidak ada komentar:

Posting Komentar