Flash Polytron R2406 SC7731

Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2406_1300C_V1.0.8_20150918
Model Ext   : POLYTRON_R2406


Bahan :
1. Download Firmware PAC Polytron R2406

•  POLYTRON_R2406_Android4.4.2_1300C_V1.0.8_20150918_20160901_200511 PAC FILE
• Atau Download Disini

2. Download Firmware Polytron R2406 via Infinity CM2 DOWNLOAD DISINI
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Tutorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Polytron R2406 via Research Download

Log Read Firmware Polytron R2406
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2406_1300C_V1.0.8_20150918
Model Ext   : POLYTRON_R2406

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 838 MiB
Saved to : F:\andro3\POLYTRON\r2406\P1923_P1923_4.4.2_POLYTRON_R2406_1300C_V1.0.8_20150918_POLYTRON_R2406\
Done!