kangsuper

Senin, 03 Desember 2018

Flash & BYPASS FRP Mito A67


FRP Mito A67  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Model Name  : sp7731c_1h10_oversea
Model Brand : A67
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : A67

BAHAN :

A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware SP7731C_MITO_A67_RAM512_6.0_V05_BYPASS_FRP_ONLY  atau  Download Disini (1MB)
  2. Download Firmware SP7731C_MITO_A67_RAM512_6.0_V01_BYPASS_FRP_ONLY  atau  Download Disini (1MB)
  3. Download Firmware SC7731C_MITO_A67_RAM1G_7.0_BYPASS_FRP_ONLY  atau  Download Disini (1MB)
 B. Firmware PAC FULL
  1. Download PAC SP7731C_MITO_A67_RAM512_6.0_V01 atau Download disini
  2. Download PAC SP7731C_MITO_A67_RAM512_6.0_V05 atau Download disini
  3. Download PAC SC7731C_MITO_A67_RAM1G_7.0 atau Download disini


Tool :
  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass WA / sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Cara Kerja :
  • Untuk FRP Mito A67 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+)
  • Sinyal Aman
Cara Flash Bypass FRP Mito A67 via Research download 


 Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_oversea
Model Brand : A67
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : A67

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_360x640.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2147 MiB
Saved to : E:\mito\mito a67\v05\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_A67\
Done!

Elapsed: 00:15:13




3 komentar:

Posting Komentar