Firmware ADVAN TAB Gallilea SL809ADN V3.0 20201127 ~ via CM2 ONLY Non PAC

Firmware ADVAN TAB Gallilea SL809ADN V3.0 20201127 ~ via CM2 ONLY

Product Brand  : ADVAN
Product Device : ADVAN_TAB_Gallilea
Product Model  : 8003
Product Name   : TAB_Gallilea
Patch Level    : Q00711
Display ID     : ADVAN_TAB_Gallilea_SL809ADN_V3.0_20201127
Ver. Incmt     : 1603359662
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-09-05
Build Time     : 22.10.2020
Product Info   : ADVAN_TAB_Gallilea
Product Manfct : ADVAN
Board Platform : sp9832e
Product Board  : sp9832e_1h10_32b

BOOT VOL +

Bahan :
1. Download ROM Firmware FlashADVAN TAB Gallilea SL809ADN V3.0 20201127

• Download Rom Firmware Flash ADVAN TAB Gallilea SL809ADN V3.0 20201127

2. File only tested via CM2 SPD v214 

• PILIH SC9832E SEPERTI GBR
  
  
  
  

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Operation : Read FW [ v2.14 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info :
Product Brand  : ADVAN
Product Device : ADVAN_TAB_Gallilea
Product Model  : 8003
Product Name   : TAB_Gallilea
Patch Level    : Q00711
Display ID     : ADVAN_TAB_Gallilea_SL809ADN_V3.0_20201127
Ver. Incmt     : 1603359662
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-09-05
Build Time     : 22.10.2020
Product Info   : ADVAN_TAB_Gallilea
Product Manfct : ADVAN
Board Platform : sp9832e
Product Board  : sp9832e_1h10_32b

AndroidVer : 10
VlnrLevel : 0x02

SP9832E__10__ADVAN_TAB_Gallilea_SL809ADN_V3.0_20201127__Q00711__ADVAN_TAB_Gallilea

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : deltanv_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 45%
Read : socko.img
ExtSparse : Compression ratio : 33%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Read : phase.cfg
Read : super.img
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!
Failed to read device! Break additional operation!

Firmware size : 0x86B2B93C ( 2.10 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable! 

 

Firmware RENO9 PRO \ RENO 9 PRO COPY

 

 

Display ID     : V6PK3H9AT_DX_B55_Reno9_Pro_O_WELCOME_HB28_FWA_B1258_ER362H_M01_20230904_1417
SW Version     : 1541594006
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2022-03-16
Build Time     : 9/4/2023 6:17:27 AM
Product Model  : pop
Product Brand  : Reno9 Pro
Product Name   : Reno9 Pro
Product Device : Reno9 Pro
CPU            : armeabi-v7a,armeabi
Product Manfct : Reno9 Pro
Product Info   : Reno9 Pro
SW             : full_v6h1_dx_b55-user 8.1.0 O11019 1693808250 release-keys
Product Board  : Freeme
Board Platform : mt6580

 Firmware RENO9 PRO \ RENO 9 PRO COPY

1. Download ROM Firmware RENO9 PRO \ RENO 9 PRO COPY  Scatter File,

• Download Rom Firmware RENO9 PRO supercopy  Scatter File | MT6580_Reno9_Pro_pop_8.1.0_V6PK3H9AT_DX_B55_Reno9_Pro_O_WELCOME_HB28_FWA_B1258_ER362H_M01_20230904_1417_O11019_Reno9_Pro
  

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 

 

Firmware Apple Promax 14 supercopy | MT6753_apple_Pro_Max14_7.0_NRD90M_droi6753_36g_n

 

Build Time: 11/29/2022 12:31:54 PM
Product Model: Pro_Max14
Product Brand: Apple
Product Name: iPhone
Product Device: iPhone 14 Pro Max
CPU : armeabi-v7a,armeabi
Product Manfct: apple
Board Platform: mt6753
Product Info: droi6753_36g_n
SW : graceltexx-user 9.0 MMB29K G9700FXXU1APFO release-keys
Startegy: 7

 

Bahan :
1. Download ROM Firmware Apple Promax 14 supercopy  Scatter File,

• Download Rom FirmwareApple Promax 14 supercopy  Scatter File | MT6753_apple_Pro_Max14_7.0_NRD90M_droi6753_36g_n
  

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Operation: Read Firmware [ v2.40a2 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Destination: E:\New folder\
Free space: 13.55 Gb
Wait...
[+] Pack FW [Sparse]
[-] Forced Read
 
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: PreLoader USB VCOM Port (COM26)
MODE: PRELOADER PORT; PORT: 26
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337
TYPE: LEGACY  [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
BROM: BROM|BL : 0xFF|0x01 [PRELOADER PORT]
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT231\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6753
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
NAND: DEVICE NOT FOUND
eMMC: OK
eMMC: 150100524331424D42012AD3DEB3AC5D
DAInf: v4.2.155
DA: DRAM ready
DA: BOOT to 2nd DA...
DA: Receiving HW info

EMMC:
CID: 150100524331424D42012AD3DEB3C25D
VEN: Samsung OEM: 0 ID: 524331424D42 [RC1BMB] PRV: 0x01
SNN: 718528179 [0x2AD3DEB3] MF: 12/2015
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00400000 [ 4.00 MB ]
USER: 0xE8F800000 [ 58.24 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337
TYPE: LEGACY  [MTK]
RNID: A14E434366547F82B4DF0CCF62DD760F
DA: STATUS: BLANK FLASH; BSTYLE: EMMC FLASH BOOT

DA: USB: HIGH-SPEED
Boot done [0]

Reading...
Ok
Patch Level: NRD90M
Display ID: NRD90M test-keys
SW Version: 1669724403
Ver. CodeName: REL
Ver. Release: 7.0
Sec. Patch: 2022-01-05
Build Time: 11/29/2022 12:31:54 PM
Product Model: Pro_Max14
Product Brand: Apple
Product Name: iPhone
Product Device: iPhone 14 Pro Max
CPU : armeabi-v7a,armeabi
Product Manfct: apple
Board Platform: mt6753
Product Info: droi6753_36g_n
SW : graceltexx-user 9.0 MMB29K G9700FXXU1APFO release-keys
Startegy: 7
 
Firmware ID: MT6753_apple_Pro_Max14_7.0_NRD90M_droi6753_36g_n
 
Read: preloader.bin
Read: proinfo.img
Read: nvram.bin
Read: lk.bin
Read: boot.img
Read: recovery.img
Read: logo.bin
Read: secro.img
Read: tz.img
Read: tz.img
Read: system.img
ExtSparse: Compression ratio: 9%
Read: cache.img
Read: userdata.img
 
FW Size: 2.30 GB
Android Info saved: _Android_info.txt
Scatter: MT6753_Android_scatter.txt
Saved: E:\New folder\MT6753_apple_Pro_Max14_7.0_NRD90M_droi6753_36g_n\
Verify device config...
Finished

Verify firmware [MT6753_apple_Pro_Max14_7.0_NRD90M_droi6753_36g_n]...
Finished

Done: 00:06:19

 

Firmware Samsung A04e A042F Scatter File

 

Product Brand: samsung
Product Device: a04e
Product Model: SM-A042F
Product Name: a04exx
SW : samsung/a04exx/a04e:12/SP1A.210812.016/A042FXXU1AVJ2:user/release-keys
Patch Level: SP1A.210812.016
Display ID: SP1A.210812.016.A042FXXU1AVJ2
SW Version: A042FXXU1AVJ2
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2022-10-01
Build Time: 10/6/2022 6:49:28 AM
Product Info: a04e
SW : a04exx-user 12 SP1A.210812.016 A042FXXU1AVJ2 release-keys
Product Manfct: samsung
Product Board: a04e
Board Platform: mt6765
Startegy: 3
Firmware ID: MT6765_samsung_SM-A042F_12_SP1A.210812.016.A042FXXU1AVJ2_SP1A.210812.016_a04e

 

Bahan :
1. Download ROM Firmware Samsung A04e A042F Scatter File,

• Download Rom Firmware Samsung A04e A042F Scatter File | MT6765_samsung_SM-A042F_12_SP1A.210812.016.A042FXXU1AVJ2_SP1A.210812.016_a04e
  

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

 Note :

CM2

-Uncek Forced Brom

-PORT : BOTH P & P

-CHECK LOCAL SLA

 

Operation: Identify Device [ v2.40a2 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] AutoEMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[+] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: PreLoader USB VCOM Port (COM100)
MODE: PRELOADER PORT; PORT: 100
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN  [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
BROM: BROM|BL : 0xFF|0x03 [PRELOADER PORT]
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT231\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: Reset Interface
PTFN: MTK USB Port (COM55)
MODE: BOOTROM; PORT: 55
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN  [RAPHAEL]
MEID: 8857919ED5F11458F77662D7F77B3681
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SOCID: 7F4A7B5ABD1E2FE2BE37566A4D708B3D72A8D876E7FB4ACDC76D99BA6137D294
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: FF: Look for EMI
BROM: FF: EMI found
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT231\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
DA: SYNC
DA: MODE: BROM
DA: EXT_RAM NOT initialized

EMMC:
CID: 150100345836324D420038C6D03889ED
VEN: Samsung OEM: 0 ID: 345836324D42 [4X62MB] PRV: 0x00
SNN: 952553528 [0x38C6D038] MF: 8/2022

EMI: FireFly preloader_hs04.bin with 9 memory type(s) supported
EMI: Init EMI from INTERNAL DB
EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC:
CID: 150100345836324D420038C6D03889ED
VEN: Samsung OEM: 0 ID: 345836324D42 [4X62MB] PRV: 0x00
SNN: 952553528 [0x38C6D038] MF: 8/2022
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x01000000 [ 16.00 MB ]
USER: 0x747C00000 [ 29.12 GB ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN  [RAPHAEL]
RNID: C8B1A097B48FB87E6559C720447480B1
MEID: 8857919ED5F11458F77662D7F77B3681

DA: USB: HIGH-SPEED
Boot done [1]

Reading...
Ok
Product Brand: samsung
Product Device: a04e
Product Model: SM-A042F
Product Name: a04exx
SW : samsung/a04exx/a04e:12/SP1A.210812.016/A042FXXU1AVJ2:user/release-keys
Patch Level: SP1A.210812.016
Display ID: SP1A.210812.016.A042FXXU1AVJ2
SW Version: A042FXXU1AVJ2
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2022-10-01
Build Time: 10/6/2022 6:49:28 AM
Product Info: a04e
SW : a04exx-user 12 SP1A.210812.016 A042FXXU1AVJ2 release-keys
Product Manfct: samsung
Product Board: a04e
Board Platform: mt6765
Startegy: 3
Firmware ID: MT6765_samsung_SM-A042F_12_SP1A.210812.016.A042FXXU1AVJ2_SP1A.210812.016_a04e

Verify firmware [MT6765_samsung_SM-A042F_12_SP1A.210812.016.A042FXXU1AVJ2_SP1A.210812.016_a04e]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020


NVRAM: TITAN_M04_S0MP1_K65V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC10_6M_A03S_GBL_PR_SP_V4_P7
NVRAM: Items: 0xBE Size: 0x0ACBD8 State: Ok
WiFi MAC: AA0036004400
BlTh MAC: DE2E468E0EC3
IMEI[1]: 6AFA585E8CBCF93
IMEI[2]: BB3B994F42CBE1C

Verify device config...
Ok
Loaders Ok

Backup [20] to C:\InfinityBox\CM2MT231\backup\MT6765__8857919ED5F11458F77662D7F77B3681\
[5] Read: NVRAM
[26] Read: NVDATA
[32] Read: PROINFO
[12] Read: LK
[25] Read: NVCFG
[16] Read: PROTECT1
[1] Read: PGPT
[37] Read: PERSIST
[0] Read: PRELOADER
[2] Read: EFS
[3] Read: SEC_EFS
[31] Read: PERSISTENT
Done 12 files
Compress: C:\InfinityBox\CM2MT231\backup\MT6765__8857919ED5F11458F77662D7F77B3681\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT231\backup\MT6765__8857919ED5F11458F77662D7F77B3681.7z
Exist [8857919ED5F11458F77662D7F77B3681]

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]
 
Scan preloader...
Preloader:
EMI: MT6765 preloader_hs04.bin with 9 memory type(s) supported
[00] eMMC LP_DDR4X ID: 150100445836384D42   Ven: Samsung   | Dev: DX68MB RAM: [ 3.00 GB ]
[01] eMMC LP_DDR4X ID: 150100445036444142   Ven: Samsung   | Dev: DP6DAB RAM: [ 4.00 GB ]
[02] eMMC LP_DDR4X ID: 150100444336444D42   Ven: Samsung   | Dev: DC6DMB RAM: [ 4.00 GB ]
[03] eMMC LP_DDR4X ID: 150100345836324D42   Ven: Samsung   | Dev: 4X62MB RAM: [ 3.00 GB ]
[04] eMMC LP_DDR4X ID: 150100445036444242   Ven: Samsung   | Dev: DP6DBB RAM: [ 4.00 GB ]
[05] eMMC LP_DDR4X ID: 13014E473243323139   Ven: Micron    | Dev: G2C219 RAM: [ 4.00 GB ]
[06] eMMC LP_DDR4X ID: 150100445636444242   Ven: Samsung   | Dev: DV6DBB RAM: [ 4.00 GB ]
[07] eMMC LP_DDR4X ID: 150100445036384D42   Ven: Samsung   | Dev: DP68MB RAM: [ 3.00 GB ]
[08] eMMC LP_DDR4X ID: 13014E473243323133   Ven: Micron    | Dev: G2C213 RAM: [ 4.00 GB ]
Preloader saved: C:\InfinityBox\CM2MT231\backup\preloader\preloader_hs04.bin
Verify C:\InfinityBox\CM2MT231\backup\preloader\preloader_hs04.bin [f7f17857]...
Exist
Done: 00:01:17
 

 

 

Firmware Welcome S30 ~ MT6580__Android__S30__10.0__preloader_aeon6580_weg_l_l300

 NOSS

 

Brand     : Android
ProdName  : S30
ProdModel : S30
Device    : S30
AndroidVer: 10.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_WEG.L_P73
preloader_aeon6580_weg_l_l300.bin

 

 Bahan :
1. Download ROM Firmware Welcome S30 | MT6580  Scatter File

• MT6580__Android__S30__10.0__preloader_aeon6580_weg_l_l300

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004938553030410486968880416B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , A00U8
[eMMC] : FLASH_CID : 1501004938553030410486968880416B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD86A79EE546B5A3923791E06A
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Android
ProdName  : S30
ProdModel : S30
Device    : S30
AndroidVer: 10.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_WEG.L_P73

[Read Ok] : preloader_aeon6580_weg_l_l300.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / aeon6580_weg_l_l300 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1494 MiB
Scatter saved to : F:\New folder\New folder\MT6580__Android__S30__S30__10.0__ALPS.L1.MP6.V2_WEG.L_P73\

All done!