kangsuper

Jumat, 29 April 2016

Flash Beyond B97 Flash Tool



Brand     : Beyond
ProdName  :  B97
ProdModel : B97
Device    :  Beyond B97
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

Firmware Beyond B97 Stock rom hanya edit pada build prop ke ZTE Nubia S2.


Bahan :
  1.  Download firmware Beyond B97   DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Beyond B97 via Flash Tool


About Beyond B97




Log Read Firmware Beyond B97
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50305858585810D3B16C8DA081
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX0
[eMMC] : FLASH_CID : FE014E50305858585810D3B16C8DA081
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : C822ADDE9B7CA605CD4CC56E0FCA43BD
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ZTE
ProdName  :  ZTE_Nubia-S2
ProdModel : ZTE_Nubia-S2
Device    :  ZTE_Nubia-S2
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_hexing72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hexing72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 686 MiB
Scatter saved to : G:\andro3\beyond\beyond b97\ok\MT6572__ZTE__ZTE_Nubia-S2___ZTE_Nubia-S2__4.2.2__ALPS.JB3.MP.V1.6\

All done!



Kamis, 28 April 2016

Firmware UUK NOTE 5 Lolipop

U-U-K Model NOTE 5
Brand     : Note5
ProdName  : Note5
ProdModel : Note5
Device    : Note5
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V2.8_MAGC6572.WET.L
UUK Model : NOTE 5

Bahan :
  1.  Download firmware UUK NOTE 5 Flash Tool
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI), Mahar pulsa 10k
Flash UUK NOTE 5 via Flash Tool

 About UUK Note 5

MediaTek Device Info list
Created by Infinity-Box (c) Chinese Miracle II (c) 2016

Modem Version : magc6572_wet_l_hspa_b1b5
Localization  : K_PRODUCT_LOCALES=en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_ZG pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES in_ID
DisplayRes    : 854 x 480

Supported DGT :
ft6xx6_ges

Supported CAM :
gc2035_yuv
gc2145mipi_yuv
ov5645_mipi_yuv
 gc0313_mipi_yuv gc0310mipi_yuv

Supported BootLoader HW :
FlashID [0] CID : 45010053454D303447 , Name : SEM04G , Vendor : 45 , [SANDISK]
FlashID [1] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [2] CID : 1501004E35585A4D42 , Name : N5XZMB , Vendor : 15 , [SAMSUNG]
FlashID [3] CID : 45010053454D303447 , Name : SEM04G , Vendor : 45 , [SANDISK]
FlashID [4] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [5] CID : 90014A483447326111 , Name : H4G2a , Vendor : 90 , [HYNIX]



Log Read Firmware UUK Note 5
Start  at : [4/26/2016 / 7:13:10 PM]
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A0DE750DA9251
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A0DE750DA9251
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : BB5F68F5B153284E9CEF5193240F3ECE
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Note5
ProdName  : Note5
ProdModel : Note5
Device    : Note5
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V2.8_MAGC6572.WET.L

[Read Ok] : preloader_magc6572_wet_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / magc6572_wet_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1381 MiB
Scatter saved to : G:\andro3\uuk note 5\MT6572__Note5__Note5__Note5__5.1__ALPS.L1.MP6.V2.8_MAGC6572.WET.L\

All done!




Selasa, 26 April 2016

Flash Advan T3E BUILD NO: v10-v1.2-jb4.2.2

Brand     : ADVAN
ProdName  : reallytek82_tb_jb5
ProdModel : T3E
Device    : reallytek82_tb_jb5
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : GP832_ADVAN_T3E_D1_V0.5_20131220_Z2
Advan T3E BUILD NO: v10-v1.2-jb4.2.2

Bahan :
  1.  Download firmware Advan T3E BUILD NO: v10-v1.2-jb4.2.2
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Advan T3E via Flash Tool


About advan T3E




Log Read Firmware Advan T3E
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4330344758057B86AB11D1
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758057B86AB11D1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 8336E09577408103AD9E7DA0448757F6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ADVAN
ProdName  : reallytek82_tb_jb5
ProdModel : T3E
Device    : reallytek82_tb_jb5
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : GP832_ADVAN_T3E_D1_V0.5_20131220_Z2

[Read Ok] : preloader_reallytek82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / reallytek82_tb_jb5 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 674 MiB
Scatter saved to : G:\andro3\ADVAN\Advan T3E V10-V1.2-JB4.2.2\MT6582__ADVAN__T3E__reallytek82_tb_jb5__4.2.2__GP832_ADVAN_T3E_D1_V0.5_20131220_Z2\

All done!

Done!
Elapsed: 00:03:57
Reconnect Power/Cable!



Flash Advan S4C Build no: TCK4516A/97055LT_V1.2/OS4.4.2



Brand     : ADVAN
ProdName  : ADVAN
ProdModel : ADVAN S4C
Device    : ADVAN
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : TCK4516_S4C_KK_V1.8_20140726
Advan S4C Build no: TCK4516A/97055LT_V1.2/OS4.4.2

Advan S4C OS4.4.2 bila sudah flash pada JB silahkan lakukan firmware upgrade, indikasi klo pake jb kamera jadi error,
-pake v09 kamera belakang tidak tampil,
-pake v10 tidak dapat terhubung kekamera

Bahan :
  1.  Download firmware Advan S4C Build no: TCK4516A/97055LT_V1.2/OS4.4.2
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
 Flash Advan S4C via Flash tool
 
about Advan S4C KK

Log Read Firmware S4C
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D43303447580EC32C7F1147
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447580EC32C7F1147
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 081651023244EF16795B5A1FD336777D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ADVAN
ProdName  : ADVAN
ProdModel : ADVAN S4C
Device    : ADVAN
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : TCK4516_S4C_KK_V1.8_20140726

[Read Ok] : preloader_wt97055.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt97055 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : G:\andro3\ADVAN\ADVAN S4C KITKAT\MT6572__ADVAN__ADVAN_S4C__ADVAN__4.4.2__TCK4516_S4C_KK_V1.8_20140726\

All done!

Done!
Elapsed: 00:04:26



Sabtu, 23 April 2016

Firmware Advan S4E Build Number : WG4009 W10 V3.0 JB4.2.2

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : ADVAN S4E
Device    : Vandroid
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1
Advan S4E Build Number : WG4009/W10_V3.0/JB4.2.2

Bahan :
  1.  Download firmware stock rom Advan S4E Build Number : WG4009/W10_V3.0/JB4.2.2
  2.  Build lain download dibawah
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Advan S4E Build lain :

Flash Advan S4E Via SP Flash Tool

Log Read Firmware Advan S4E
Operation : Read Flash [ v1.45 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E3958524D420096D6C26051C7
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D420096D6C26051C7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
[eMMC] : FLASH_UCP : 1792 MiB [eMMC 2 GiB]
DEV RID    : AA7F1D5EDD4A729B14A166468F7A1EDF
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : ADVAN S4E
Device    : Vandroid
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_vanzo72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / vanzo72_wet_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 665 MiB
Scatter saved to : G:\andro3\ADVAN\s4e wg4009 w10 v3.0 jb4.2.2\MT6572__ADVAN__ADVAN_S4E__Vandroid__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:04
Reconnect Power/Cable!



FLash Aldo F68


Aldo F68 CPU RDA 8810


Bahan :
1. Firmware Aldo F68 DOWNLOAD HERE 
2. Kalau belum punya fastboot driver dll, Download Here

Pass : http://kangsuper.blogspot.co.id

 Cara Kerja :
1. extact isi zip fasboot bukan folder tapi isinya ke DRIVE C:\ (intinya biar enak aja)
2. masuk fastboot volume up + down on terus colok kabel, seperti gambar dibawah
3. pilih enter fastboot
4. colok ke pc install driver, arahkan ke folder driver tadi yg dicopy ke c:\driver cari dlm folder
5. masuk ms dos promt/command promt
6. copykan system.img dan userdata.img ke C:\
6. ketik fastboot flash system system.img => enter
 7. done

Bila juga mau flash user data juga ketikkan
fastboot flash userdata userdata.img =>enter

About Aldo F68


Firmware Sky Call N801s



Firmware sky call n801s spd 8810_6820

backup bin file CPU SPD                     






pass  :  kangsuper


Silahkan Flash menggunakan Volcano, MCN, Miraclebox, cm2 dll, yang support flash bin file.
BACKUP DULU GAN.


About Sky Call N801s


Jumat, 22 April 2016

Firmware TIGER G+G KF-398 spd 8810_6820


Firmware TIGER G+G KF-398 spd 8810_6820

backup bin file CPU SPD


pass : kangsuper


Silahkan Flash menggunakan Volcano, MCN, Miraclebox, cm2 dll, yang support flash bin file.
BACKUP DULU GAN.


Cara Flash Advan S5J Build Number S5J V1.3 JB 4.2.2

Advan Vandroid S5J Build Number S5J V1.3 JB 4.2.2

  1. Firmware  S5J Build Number S5J V1.3 JB 4.2.2 & Tool jadi satu DOWNLOAD HERE atau Disini
  2. Tool DFU
  3. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
ROM VERSI LAIN :

Driver silahkan install  BRCM_WinUSB_ADB_Jungo_MTP_RNDIS_Driver_1.05.exe

Tutorial Flash Advan S5J V1.3 JB 4.2.2




Flash Imo S89 Flash Tool

Brand     : IMO
ProdName  : imo_s89
ProdModel : IMO S89
Device    : imo_s89
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1.2


Bahan :
  1.  Download firmware stock rom IMO S89 V06 dan IMO S89 V08
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash IMO S89 Flash Tool


About Imo S89

Log Read Firmware Imo S89
Start  at : [4/20/2016 / 1:21:51 AM]
Operation : Read Flash [ v1.45 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 4B000115303055357D6B024D7560607C
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004B355530304D026B7D7C606075
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 779E9FB54A992E8FBBC1994964F8FF02
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : IMO
ProdName  : imo_s89
ProdModel : IMO S89
Device    : imo_s89
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1.2

[Read Ok] : preloader_amoi89_wet_jb2.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / amoi89_wet_jb2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 692 MiB
Scatter saved to : G:\andro3\imo\imo s98\MT6589__IMO__IMO_S89__imo_s89__4.2.1__ALPS.JB2.MP.V1.2\

All done!

Done!
Elapsed: 00:03:45
Reconnect Power/Cable!

Finish at : [4/20/2016 / 1:25:37 AM]



Flash Gstar 718


Brand     : JTY
ProdName  : jkt_gstar718_wcdma
ProdModel :  Gstar718
Device    : jkt_gstar718_wcdma
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : Gstar718_gstar_0838_2518_V1.0_ID_20141118

Maaf file yang saya upload ini ada virusnya dihilangkan virusnya tidak bisa mungkin karena emmcnya dah corrupt, karena tidak ada yang upload maka saya upload, buat yang matot atau booloop, yang telanjur diflash atau repair malah matot atau bootloop. Tinggal scan aja pake cm2 ato tool lainnya.

NO PASSWORD
Bahan :
  1.  Download firmware stock rom GSTAR 718 DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
Flash GSTAR 718 Flashtool
About Gstar 718


Log read firmware gstar 718

Start  at : [4/19/2016 / 10:12:50 PM]
Operation : Read Flash [ v1.45 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D4201822BC2AFA0DF
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D4201822BC2AFA0DF
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : B9FA6571BF24718ED6D3B7C7A0029BCC
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : JTY
ProdName  : jkt_gstar718_wcdma
ProdModel :  Gstar718
Device    : jkt_gstar718_wcdma
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : Gstar718_gstar_0838_2518_V1.0_ID_20141118

[Read Ok] : preloader_jkt_gstar718_wcdma.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / jkt_gstar718_wcdma / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 824 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\VIRUS\MT6572__JTY___Gstar718__jkt_gstar718_wcdma__4.4.2__Gstar718_gstar_0838_2518_V1.0_ID_20141118\

All done!




Kamis, 21 April 2016

Cara Flash Oppo Mirror 3 Oppo 3001

NO PASSWORD
Flash salah satu obat buat yang terserang virus ataupun bootloop, ataupun penyakit lain.

Bahan :
1. Firmware Oppo Mirror 3 3001 DOWNLOAD HERE atau Kesini
2. Recovery Oppo Mirror 3 3001 Download Here
3. Kalau belum punya fastboot driver dll, Download Here

Cara Kerja Buat yg hilang recoverynya:
1. extact isi zip fasboot bukan folder tapi isinya ke DRIVE C:\ (intinya biar enak aja)
2. copy recovery.img ke c:\
3. masuk fastboot volume up + on
4. colok ke pc install driver, arahkan ke folder driver tadi yg dicopy ke c:\driver cari dlm folder
5. masuk ms dos promt/command promt
6. ketik  fastboot oem unlock => enter
7. ketik fastboot flash recovery recovery.img => enter

8. recovery sudah terinstall, matikan hape
9. copy file Mirror3EX_11.A.09_OTA_INT_009_all_150505.zip ke mmc
10. masuk recovery mode Volume down + on
11. pilih bahasa, mau bahasa cina silahkan klo bisa
12. pilih install from sd
 13. pilih Mirror3EX_11.A.09_OTA_INT_009_all_150505.zip, flashing berjalan

14. Flashing selesai
15. tinggal reboot
16. done


NOTE:
Bila masih stuck logo setelah di flash, masuk fastboot lagi kemudian ketikkan di command promt

fastboot -w

tunggu sampai selesai




Sabtu, 16 April 2016

Tutorial Flash Research Download

Tutorial Flash Research Download
1. Tool Flash Research Download R2.10 Download Here
2.  Tool SPD_Upgrade_Tool_R4.0.0001 Download Here
3. Install Driver SPD by InfinityBox Download Here

1. Buka research download

2. Pilih File pac
3. tekan tombol volume up + down bersamaan terus colok kabel
4. driver terinstall
5. Start

 Lihat Video flashing research download

Bila terjadi eror : BISA CEK DISINI EROR PADA RESEARCH DOWNLOAD
1. Waktu melakukan Flash berhenti pada Backup NV, hasil hape menjadi bergetar,
cara:
- buka tab backup
- hilangkan centangan file backup, (resiko imei hilang)
- flash lagi


Note :