Firmware Mito A780

 Device Brand   : MITO
Device Model   : scx15_sp7715ga
Device CPU     : scx15_sp7715ga
Device IntName : scx15_sp7715gaplus_UUIhvga
Device Version : 4.4.2
Device Compile : 8/25/2015 9:33:32 AM
Device Project : MITO_A780_T07
Device ExtInfo : MITO_A780

Bahan:

1. Download Fimware PAC  Research Download MITO_A780 Download Disini
2. Firmware Mito A780 Flash via Infinity CM2 Download Disini
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. pass: mitoa780ok1

 Error pada research download baca disini


Flash Mito A780 Research Download

Log Read Flash Mito A780 via CM2
 Operation : Read FullFlash [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.14_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

Firmware Size : 336 MiB
Saved to : G:\InfinityBox\CM2SPD\Flash\mito a780 \SC77xx_ANDROID_NAND_b256k\
Done!

Elapsed: 00:07:10

Reconnect Power/Cable!