BYPASS FRP & FLASH HM M3

FRP HM M3 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya, thx

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

 Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

Bahan :

A. BYPASS FRP ONLY ukuran PAC 1 MB

• Download Firmware PAC HM M3_V1.4 BYPASS_FRP_ONLY  atau  Download Disini (1MB)
• Download Firmware PAC HM M3  V2.1 BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. ROM PAC FULL HM M3

• Download Firmware PAC HM M3 V1.4 atau  Download Disini

• Download Firmware PAC HM M3 V2.1 atau  Download Disini

 TOOL :

1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
2.  Driver SPD by InfinityBox
3.  Tutorial Flash via research here
4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

• Untuk FRP HM M3 tinggal pake PAC BYPASS FRP ONLY
• Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
• Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
• Boot volume (+)

Cara Bypass FRP HM M3 via Research Download

Cara Flash HM M3 via Research Download

Log Read Firmware HM M3
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1707 MiB
Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
Done!