Flash Axioo PICOphone M4P+ (M3)

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP8_20151209
Model Ext   : PICOphone_M4P_M3


Bahan :

1.  Download Firmware PAC Axioo PICOphone M4P+ (M3) atau  Download Disini
2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
3.  Driver SPD by InfinityBox
4.  Tutorial Flash via research here
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume UP+DOWN

Cara Flash Axioo PICOphone M4P+ (M3) via Research Download

Log Read Firmware Axioo PICOphone M4P+ (M3)
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP8_20151209
Model Ext   : PICOphone_M4P_M3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1974 MiB
Saved to : D:\axioo\m4p m3\m4p+ m3\SP7731GEA_HDR_PICOphone_M4P_M3_5.1_PICOphone_M4P\
Done!