Flash Mito A91 SP7731CEA T08

Model Name  : A91
Model Brand : MITO
Model Device: A91
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MITO_A91_20161223_648_B1T08
Model Ext   : MITO A91

Bahan :

1.  Download Firmware PAC MITO A91 T08 atau Download Disini
2.  Download Firmware PAC MITO_A91_T12 atau Download Disini
3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
4.  Driver SPD by InfinityBox
5.  Tutorial Flash via research here
6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume +/-
2. Tested buat versi T08

Cara Flash Mito A91 via SPD UPGRADE TOOL

 Log Read Firmware Mito A91
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : A91
Model Brand : MITO
Model Device: A91
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MITO_A91_20161223_648_B1T08
Model Ext   : MITO A91
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1939 MiB
Saved to : E:\andro 1\mito\a91\t08\SP7731CEA_A91_6.0_MITO_A91_20161223_648_B1T08_MITO_A91\
Done!