kangsuper

Selasa, 06 Juni 2017

Flash - Repair Aldo AS 9 Blank After Flash


Aldo AS9
Model Name  : sp7731cea_t13_bp236_64_8_dt
Model Brand : SPRD
Model Device: t13_bp236_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : BP236_ALDO_V2.1_20161011
Model Ext   : ALDO

Kasus awal bootloop, di flash pake pac aldo as9 v1.2 malah jadi blank biru tapi muncul suara, seperti ss dibawah :

NOTE : SILAHKAN CEK FISIK ALDO AS9 DENGAN SS DIBAWAH
Bahan :

PASS : as9-21ok



1. Download Firmware PAC Aldo AS9 V2.1 Lolipop 5.1 atau Download Disini
 
                     Aldo AS9 V2.1
2. Download Rom Repair Aldo AS 9 V2.1 BLANK Lolypop atau Download Disini
ASLINYA Project Ver : BP236_ALDO_V2.1_20161203
Fisik As 9 atas ma bawah man beda di stricker QC, merah ma biru, tapi apa man itu yg membedakan???
Rom sama dg v2.1 diatas (NO.1) tapi beda UBOOT, BOOT, dan SPL_LOADER



3. Download Firmware PAC Aldo AS9 V1.2 Marshmellow atau Download Disini

               ALDO AS9 V1.2


4. Download Firmware PAC Aldo AS9 V1.0 Marshmallow 6.0 atau Download Disini
                   Aldo AS9 V1.0

4. Download SPD_Upgrade_Tool_R4.0.0001  Download Disini
5. Driver SPD by InfinityBox
6. Tutorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Flash pake SPD_Upgrade_Tool_R4.0.0001
2. Bila tetap blank silahkan buka setting pada tool upgrade tool, pilih pada tab FLASH OPERATIONS, centang Erase All Flash, flash seperti biasa, done
3. Yang gak tahu versi flash system, user data, ma cache aja, coba satu per satu
4. Untuk V2.1 lolypop yg habis flash dengan v2.1 jadi blank / lcd garis-garis muncul suara, silahkan flash dengan Firmware aldo as9 v2.1 yang ke dua, repair blank, coba dulu pake versi lain, bru pake yg repair

Cara Flash Aldo AS 9 via Research Download



Log Read Firmware Aldo AS 9
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
 ====  Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : sp7731cea_t13_bp236_64_8_dt
Model Brand : SPRD
Model Device: t13_bp236_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : BP236_ALDO_V2.1_20161011
Model Ext   : ALDO
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 3209 MiB
Saved to : E:\andro 1\aldo\as9\v2.1\SP7731CEA_T13_ZX_64_8_t13_bp236_64_8_5.1_BP236_ALDO_V2.1_20161011_ALDO\
Done!





11 komentar:

Posting Komentar