Flash Brandcode B73 Nand

Brand     : Brandcode
ProdName  : B73
ProdModel : B73
Device    : Brandcode
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Bahan :

 Download Firmware Brandcode :

•   Download Firmware Brandcode B73 v1.4 KK4.4.2 atau Download Disini

 
Versi Lain Brancode B73

•   Download Firmware Brandcode B73 4.2.2   atau Download Disini
•   Download Firmware Brandcode_B73_MT6572_yuanda72_cwet_lca atau Download Disini

1.  Download Flash Tool DOWNLOAD DISINI
2.  Driver bila belum punya instal dulu driver mtknya
3.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

note :
bila tidak tahu versinya, buart jaga2, uncheck uboot/lk

Cara Flash Tablet Brandcode B73 via Flash Tool

Log Read Firmware Brandcode B73
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 009800BC009000660076001600080000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : 2F811F793DCFD6539D00E2FFFD8D7A80
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
[Read Ok] : preloader_yuanda72_cwet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img
[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
FW Size : 319 MiB
Brand     : Brandcode
ProdName  : B73
ProdModel : B73
Device    : Brandcode
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1
Android Info saved
Scatter saved to : E:\andro 1\brandcode\b73\nand\New folder\MT6572_NAND_Brandcode__B73__Brandcode__4.4.2__ALPS.KK1.MP7.V1

Flash Asiafone AF9977

Asiafone AF9977
Brand     : alps
ProdName  : cp706_ailifeng
ProdModel : AF9977
Device    : cp706_ailifeng
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

File yang kami upload disini dengan board CP-706-MB-V4.0-168, silahkan cek di bagian atas di board anda.
Bahan :

PASS : afok-9977

1.  Download Firmware Tablet AsiaFone AF9977 atau Download Disini
2.  Download Flash Tool DOWNLOAD DISINI
3.  Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Tablet Asiafone AF9977 via Flash Tool

Log Read Firmware Asiafone AF9977
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E43617264202635A9305613F1
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264202635A9305613F1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 2937E061EDFC08B00E6293ABE572CC86
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : cp706_ailifeng
ProdModel : AF9977
Device    : cp706_ailifeng
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_cp706_ailifeng.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / cp706_ailifeng / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 954 MiB
Scatter saved to : E:\andro 1\asiafone\9977\MT6572__alps__AF9977__cp706_ailifeng__4.4.2__ALPS.KK1.MP7.V1\

All done!

Flash - Repair Aldo AS 9 Blank After Flash

Aldo AS9
Model Name  : sp7731cea_t13_bp236_64_8_dt
Model Brand : SPRD
Model Device: t13_bp236_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : BP236_ALDO_V2.1_20161011
Model Ext   : ALDO

Kasus awal bootloop, di flash pake pac aldo as9 v1.2 malah jadi blank biru tapi muncul suara, seperti ss dibawah :

NOTE : SILAHKAN CEK FISIK ALDO AS9 DENGAN SS DIBAWAH
Bahan :

PASS : as9-21ok

1. Download Firmware PAC Aldo AS9 V2.1 Lolipop 5.1 atau Download Disini
 
                     Aldo AS9 V2.1
2. Download Rom Repair Aldo AS 9 V2.1 BLANK Lolypop atau Download Disini
ASLINYA Project Ver : BP236_ALDO_V2.1_20161203
Fisik As 9 atas ma bawah man beda di stricker QC, merah ma biru, tapi apa man itu yg membedakan???
Rom sama dg v2.1 diatas (NO.1) tapi beda UBOOT, BOOT, dan SPL_LOADER

3. Download Firmware PAC Aldo AS9 V1.2 Marshmellow atau Download Disini

               ALDO AS9 V1.2


4. Download Firmware PAC Aldo AS9 V1.0 Marshmallow 6.0 atau Download Disini

                   Aldo AS9 V1.0

4. Download SPD_Upgrade_Tool_R4.0.0001  Download Disini
5. Driver SPD by InfinityBox
6. Tutorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Flash pake SPD_Upgrade_Tool_R4.0.0001
2. Bila tetap blank silahkan buka setting pada tool upgrade tool, pilih pada tab FLASH OPERATIONS, centang Erase All Flash, flash seperti biasa, done
3. Yang gak tahu versi flash system, user data, ma cache aja, coba satu per satu
4. Untuk V2.1 lolypop yg habis flash dengan v2.1 jadi blank / lcd garis-garis muncul suara, silahkan flash dengan Firmware aldo as9 v2.1 yang ke dua, repair blank, coba dulu pake versi lain, bru pake yg repair

Cara Flash Aldo AS 9 via Research Download

Log Read Firmware Aldo AS 9
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
 ====  Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : sp7731cea_t13_bp236_64_8_dt
Model Brand : SPRD
Model Device: t13_bp236_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : BP236_ALDO_V2.1_20161011
Model Ext   : ALDO
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 3209 MiB
Saved to : E:\andro 1\aldo\as9\v2.1\SP7731CEA_T13_ZX_64_8_t13_bp236_64_8_5.1_BP236_ALDO_V2.1_20161011_ALDO\
Done!