kangsuper

Jumat, 19 Mei 2017

Flash Brandcode B11 ~ Fix LCD Buram After Flash



Brandcode B11 BP237_Brandcode_V2.1_20161119
Model Name  : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext   : B11

Brandcode V2.1 diflash pake V1.0, alhasil LCD jadi Burem kemudian gelap, tapi muncul suara.

Bahan:

PASS: bcode-11sip


1. Download Firmware PAC Brandcode B11


2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini


Note :
1. BOOT Volume +
2. Samakan versi
3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot


Cara Flash  Brancode B11 via Research Download

Log Read Firmware Brandcode B11
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- >Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext   : B11
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2329 MiB
Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
Done!




13 komentar:

  1. Balasan
    1. pass bermahar pulsa 10k, silahkan konfirmasi dinomor diatas, thx

      Hapus
    2. OK, done juga, muantab filenya

      Hapus
  2. Gmn cara konfirmasi pulsa 10k bang

    BalasHapus
    Balasan
    1. silahkan sms dinomer yg tertulis diatas, thx

      Hapus
  3. bos kok fil mau di gunakan ada peringatan 'bin packet zise small maybe it has been destruktet

    BalasHapus
    Balasan
    1. silahkan gunakan research download yg kami upload, silahkan cek video flash brandcode b11 yg kami upload diatas, thx

      Hapus
  4. kang ada firmware mivo jazz j2

    BalasHapus
  5. kang di sini kasus nya sudah terlanjur blank hitam file mna yg cocok buat yg sudah terlanjur blank hitam,,,di atas ada 3 pilihan

    BalasHapus
    Balasan
    1. brancode b11 langsung flash gan, coba 1/1 klo gak tau versi awal, tested buat versi yang telah kami coba, thx

      Hapus

Posting Komentar