kangsuper

Rabu, 31 Agustus 2016

Flash & Reset FRP Coolpad A110 via Flash Tool


Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : Coolpad
ProdName  : A110
ProdModel : A110
Device    : A110
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YL6580.WEG.L

Bahan :
  1.  Download FRP ONLY COOLPAD A110
  2.  Download FRP & Full Firmware COOLPAD A110 
  3.  Download MT6580__Coolpad__A110__5.1__ALPS.L1.MP6.V2_YL6580.WEG.L
  4.  Download Flash Tool DOWNLOAD DISINI
  5.  Driver bila belum punya instal dulu driver mtknya
  6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  7.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
 Cara Kerja :
1. Buat remove verifikasi akun google Coolpad A110 tinggal pake file FRP only (file ke 1), hanya centang pada tab FRP saja seperti video dibawah
2.  Kalau mau full flash Coolpad A110 pake file yang ke 2


Flash Coolpad A110 via Flash Tool

Log Read Firmware Coolpad A110
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507CEA1C5FC72A3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507CEA1C5FC72A3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x2AC4A22653C3A3FB6794FB13DDCCC2C8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Coolpad
ProdName  : A110
ProdModel : A110
Device    : A110
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YL6580.WEG.L

[Read Ok] : preloader_cp3506g.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : lk_bak.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / cp3506g / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1956 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6580__Coolpad__A110__A110__5.1__ALPS.L1.MP6.V2_YL6580.WEG.L\
kangsuper.co.id
All done!



Flash Advan S5J+ Build Number :


Brand     : ADVAN
ProdName  : hct82_cwet_kk
ProdModel : S5J+
Device    : hct82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582

Bahan : 

Download ADVAN-S5J+ Build Number : WG5009/HCT_J11MN_A2/Kitkat4.4 atau DISINI

Download ADVAN-S5J+ Build Number : WG5009/HCT_J11MB_A2/Kitkat4.4 atau DISINI


  1.  Download Flash Tool DOWNLOAD DISINI
  2.  Driver bila belum punya instal dulu driver mtknya
  3.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  4.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Rom S5J+ menurut versi R :
  1.  S5J+_R07 Download Disini
  2.  S5J+_R09 Download Disini
  3.  S5J+_R12 Download Disini
  4.  S5J+_R14 Download Disini
Note buat yang mengalami eror playstore di semua versi S5J+ :
1. Masuk setting => aplikasi => copot pemasangan perbaruan Google playstore dan google service


2. Masuk ke aplikasi playstore => setelan dan matikan perbaruan secara otomatis

3. Restart, done

Flash Advan S5J+ VIA Flash Tool


Log Read Firmware Advan S5J+
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040501A24BA2B17B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501A24BA2B17B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 8D041896AE74397AFE3185A5477F65F8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ADVAN
ProdName  : hct82_cwet_kk
ProdModel : S5J+
Device    : hct82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : WG5009_S5J+_R08_20141203

[Read Ok] : preloader_hct82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hct82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 948 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__ADVAN__S5J+__hct82_cwet_kk__4.4.2__WG5009_S5J+_R08_20141203\

kangsuper.co.id
Done


Senin, 29 Agustus 2016

Flash Aldo AS 8 SC7731


Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : AS8
Device Model   : scx35_sp7731gea_ts18_kechao_8p8
Device CPU     : sp7731gea
Device IntName : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Device Version : 4.4.2
Device Compile : 9/12/2015 10:44:51 AM
Device Project : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Device ExtInfo : AS8

Mohon diperhatikan : Firmware ini hanya untuk ALDO_AS8_V07



Bahan :
1. Firmware PAC ALDO_AS8_V07 DOWNLOAD DISINI
2. Firmware PAC ALDO_AS8_V07 New Pack DOWNLOAD DISINI
3. Firmware Infinity CM2 ALDO_AS8_V07 DOWNLOAD DISINI
4. Download Research Download R2.10
5. Driver SPD by InfinityBox
6. Turorial Flash via research here
7. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

UNTUK ALDO AS8 VERSI YANG LAIN DOWNLOAD DIBAWAH
  1.  ALDO AS8 V03
  2.  ALDO AS8 V06

NOTE :
Versi harus sama





Log Read Firmware Aldo AS8 V.07
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Model Brand : AS8
Model Device: scx35_sp7731gea_ts18_kechao_8p8
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Model Ext   : AS8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.46_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 979 MiB
Saved to : G:\andro3\aldo\AS8\SP7731GEA_scx35_sp7731gea_ts18_kechao_8p8_4.4.2_7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14_AS8\
Done!


SAMA DENGAN LINK DISINI

Flash & FRP Advan i45 Build Number : TCK4531A/S302/Lollipop 5.1

Advan I45 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : i45
Device    : Vandroid
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_RLK6735M.65U.L1_P1
Tested Buat V1.9 dan 2.0

Bahan :
  1.  Download Firmware Advan I45 Build Number : TCK4531A/S302/Lollipop 5.1 v1.9 atau Download Disini
  2. Download Fimware FRP Only atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Cara Kerja :
1. Buat remove verifikasi akun google Advan I45 tinggal pake file FRP only (file ke 2), hanya centang pada tab FRP saja
2.  Kalau mau full flash pake file yang ke 1


 Flash Advan I45 via Flash Tool

Log Read Firmware Advan i45
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4400014530303153EA9401389FAAA82E
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_CID : 4501004453313030380194EA2EA8A29F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFEC7E5116484A02F31496FE1BCA3A7B8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : i45
Device    : Vandroid
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_RLK6735M.65U.L1_P1

[Read Ok] : preloader_rlk6735m_65u_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / rlk6735m_65u_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1773 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6735__ADVAN__i45__Vandroid__5.1__ALPS.L1.MP3.V2_RLK6735M.65U.L1_P1\
kangsuper.blogspot.co.id
All done!



Rabu, 24 Agustus 2016

Firmware Acer Z500 BI Bahasa Indonesia Dual SIM


Brand     : acer
ProdName  : z500_aap_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16
Flash Acer Z500 BI Bahasa Indonesia Dual SIM

Bahan :
  1.  Download firmware stock rom Acer Z500 BI Bahasa Indonesia Dual SIM atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



Log Read Firmware Acer Z500
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265040503A1BBBA61F3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265040503A1BBBA61F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xBBFBB15227D09C6A4B559AB2E428D3B1
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : acer
ProdName  : z500_aap_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_aap_gen1.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / aap_gen1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1218 MiB
Scatter saved to : F:\andro3\ACER\z500 bi dual sim\MT6582__acer__Z500__acer_Z500__4.4.2__ALPS.KK1.MP1.V2.16\
kangsuper.blogspot.co.id 
All done!

Done!
Elapsed: 00:05:56



Firmware Flash Tool IMO MTK

FIRMWARE IMO MTK



Firmaware Imo yang kami upload disini, flash menggunakan SP flash tool.


1. Imo Discovery II

2. Imo Q8

3. Imo S70

4. Imo S78

5. Imo S87
6. Imo S88
7. Imo S89
Silahkan ke link Disini

8. Imo S98
 9. Imo S99

Bahan :
  1.  Download firmware stock rom IMO diatas
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  1 pass buat semua Imo yg kami upload DISINI, Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k




Sabtu, 13 Agustus 2016

Flash AsiaFone AF9899 ( CGN )


Brand     : ASIAFONE
ProdName  : AF9899
ProdModel : AF9899
Device    : AF9899
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

Bahan :

  1.  Download Firmware Asiafone AF9899 (CGN) DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Asiafone AF9899 CGN Via Flashtool

Log Read Firmware AsiaFone AF9899 ( CGN )

Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034472825565E185125
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034472825565E185125
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x7B08506B1E316FAA8EB27C35A1964EC6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ASIAFONE
ProdName  : AF9899
ProdModel : AF9899
Device    : AF9899
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_i31_xfy.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / i31_xfy / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 680 MiB
Scatter saved to : F:\andro3\ASIAFONE\asiafone af9899\MT6582__ASIAFONE__AF9899__AF9899__4.4.2__ALPS.KK1.MP1.V2.16\
kangsuper.blogspot.co.id
 All done!

Done!
Elapsed: 00:05:34



Cara Buka FRP Acer Z320 & Z330 VERIFIKASI AKUN GOOGLE

Ketika mengembalikan perangkat ke pengaturan pabrik dengan Factory Reset Protection ( FRP ) fitur diaktifkan , Anda harus memasukkan nama pengguna dan password untuk Akun Google yang terdaftar terakhir untuk mendapatkan kembali akses ke perangkat . Anda tidak akan Mampu mengakses perangkat tanpa mandat yang benar . verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda ( misalnya, jika perangkat hilang atau dicuri ) .
Verifikasi akun google Acer  Z320 & Z330. Untuk bisa menggunakan Acer  Z320 & Z330 yang telah terkunci FRP atau Factory Reset Protection, kita harus melakukan unlock FRP, salah satu cara adalah melakukan restore dari backupan hape normal yg tidak terkunci FRP.
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Tool bisa digunakan untuk FRP Acer  Z320 & Z330
Bahan :

- CLICKFRPZ320.bat DOWNLOAD DISINI atau  DOWNLOAD DISINI

Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Cara :
1. Masuk recovery pencet Volume up + on

2. Pilih Fastboot Mode, pencet on
3. Hape akan masuk ke fastboot mode ditandai dengan stuck logo spt dibawah

4. Colok kabel usb, install driver fastboot, driver ada didalam folder 1clickbat
5. Klik CLICKFRPZ320.bat, proses hanya 1detik hape langsung restart
6. done

Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



Kamis, 11 Agustus 2016

Flash ZTE V830W BI / Bahasa Indonesia Flash Tool


Platform: MT6572, cpu abi: armeabi-v7a
Manufacturer: ZTE
Board: ztenj72_we_72_kk, name: P172F10
Brand: ZTE, model: ZTE V830W
Build id: KOT49H, version: 4.4.2 (DIS-ID-QB18D-P172F10V1.0.0)
Build version: DIS-ID-QB18D-P172F10V1.0.0

ZTE V830W Firmware Indonesia
ZTE V830W BI / Bahasa Indonesia

Bahan :
  1.  Download ZTE V830W BI / Bahasa Indonesia Download Disini atau  Download Disini
  2.  Download ZTE V830W BI / Bahasa Indonesia Scatter Full Download Disini atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Log Read Firmware  ZTE V830W BI / Bahasa Indonesia

[zegobit] winusb, version: 1.0.3.2, date: 12-18-2015
Please "Identify Device" at first, before any other operation.
BROM version: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.71 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Scanning BootROM or Preloader port... Done.
 Detected PreLoader USB VCOM Port (COM8)
Sending download agent...
USB speed: USB_HIGH_SPEED
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 SRAM size: 128 KiB
DRAM size: 512 MiB
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x48344731640400), rev: 0x05, serial number: 0x03A2E719
Manufacturing date: Sep 1998
CID: 90014A48 34473164 040503A2 E719913B
Capacity: 3.65 GiB(3,921,674,240 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 3.64 GiB(3,909,091,328 bytes)
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: ZTE
board: ztenj72_we_72_kk, name: P172F10
brand: ZTE, model: ZTE V830W
build id: KOT49H, version: 4.4.2 (DIS-ID-QB18D-P172F10V1.0.0)
build description: ztenj72_we_72_kk-user 4.4.2 KOT49H eng.dongxiaoyong.20140924.181029 release-keys
build version: DIS-ID-QB18D-P172F10V1.0.0
lcd: ili9806e_fwvga_dsi_vdo_m453_txd nt35512_fwvga_dsi_vdo_m453
screen resolution: 854 x 480
main camera: t8ev5_yuv t8ev5sjc_yuv
 lens: sensordrive
front camera: gc2145_yuv at2250_yuv
audio: amp_6323pmic_spk
touch: msg2138a_fwvga
modem: ztenj72_we_72_kk_hspa_18
BROM version: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.71 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Scanning BootROM or Preloader port... Done.
 Detected PreLoader USB VCOM Port (COM8)
Sending download agent...
USB speed: USB_HIGH_SPEED
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 SRAM size: 128 KiB
DRAM size: 512 MiB
BL Secure ver: 0x02
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x48344731640400), rev: 0x05, serial number: 0x03A2E719
Manufacturing date: Sep 1998
CID: 90014A48 34473164 040503A2 E719913B
Capacity: 3.65 GiB(3,921,674,240 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 3.64 GiB(3,909,091,328 bytes)
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: ZTE
board: ztenj72_we_72_kk, name: P172F10
brand: ZTE, model: ZTE V830W
build id: KOT49H, version: 4.4.2 (DIS-ID-QB18D-P172F10V1.0.0)
build description: ztenj72_we_72_kk-user 4.4.2 KOT49H eng.dongxiaoyong.20140924.181029 release-keys
build version: DIS-ID-QB18D-P172F10V1.0.0
lcd: ili9806e_fwvga_dsi_vdo_m453_txd nt35512_fwvga_dsi_vdo_m453
screen resolution: 854 x 480
main camera: t8ev5_yuv t8ev5sjc_yuv
 lens: sensordrive
front camera: gc2145_yuv at2250_yuv
audio: amp_6323pmic_spk
touch: msg2138a_fwvga
modem: ztenj72_we_72_kk_hspa_18
Reading preloader_ztenj72_we_72_kk.bin... Done.
Reading mbr... Done.
Reading ebr1... Done.
Reading pro_info... Done.
Reading nvram... Done.
Reading protect_f... Done.
Reading protect_s... Done.
Reading seccfg... Done.
Reading lk.bin... Done.
Reading boot.img... Done.
Reading recovery.img... Done.
Reading secro.img... Done.
Reading misc... Done.
Reading logo.bin... Done.
Reading expdb... Done.
Reading system.img... Done.
Reading cache.img... Done.
Reading userdata.img... Done.
Reading fat.img... Done.
Files saved to \\%BACKUPS%\ZTE\ZTE%20V830W\DIS-ID-QB18D-P172F10V1.0.0\
Completed in 17 mins 13.687 s



Senin, 08 Agustus 2016

Flash Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M


Brand     : ADVAN
ProdName  : hct72_cwet_kk
ProdModel : ADVAN S4+
Device    : hct72_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : P968_S4+_MT6572M_MB_V1.0_4.4.2_B2_V0.1_20140613

Bahan :
  1.  Download Firmware Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M atau Download DISINI
  2.  Download Firmware Advan S4+ scatter full backup atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Advan S4+ via Flash Tool
Log read Firmware Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7901004D4D4330344745075C5CC03109
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x79 , OEM : 0100
[eMMC] : FLASH_INF : [NOT_IN_BASE] , G40CM
[eMMC] : FLASH_CID : 7901004D4D4330344745075C5CC03109
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : E097A3C9CA21DE29A646470818C4F695
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : ADVAN
ProdName  : hct72_cwet_kk
ProdModel : ADVAN S4+
Device    : hct72_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : P968_S4+_MT6572M_MB_V1.0_4.4.2_B2_V0.1_20140613

[Read Ok] : preloader_hct72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hct72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 809 MiB
Scatter saved to : G:\andro3\ADVAN\S4+ BUILD P968 HTC-MBC1-A2 MT6572M



Cara Hapus Protect BlackBerry ID pada Blackberry 10



Hali ini bisa terjadi jika BlackBerry Anda menjalankan BlackBerry 10 OS versi 10.3.2 atau yang lebih baru, BlackBerry Protect dirancang untuk memberikan perlindungan anti-pencurian untuk perangkat.
Saat Anda mengaktifkan BlackBerry Protect di perangkat, orang lain tidak bisa melakukan yang berikut ini tanpa mengetahui BlackBerry ID Anda.
Anda dapat mematikan fitur anti-pencurian dengan mematikan BlackBerry Protect di perangkat. Anda harus memasukkan BlackBerry ID untuk mematikan BlackBerry Protect. Anda juga bisa mematikan fitur anti-pencurian dengan menghapus perangkat dari akun BlackBerry Protect, kecuali perangkat ditandai sebagai dicuri.

Sehingga apabila BlackBerry Protect dihidupkan dan ada seseorang yang mencoba menyetel perangkat Anda dengan BlackBerry ID yang berbeda, perangkat menjadi tidak dapat digunakan.

 Mohon digunakan dengan bijak, jangan digunakan pada perangkat Blackberry hasil curian, karena resiko anda akan tanggung sendiri.
Sewaktu BB 10  fitur perlindungan anti pencurian aktif maka anda hanya akan mentok pada menu email dan password seperti gambar dibawah diatas.

 Karena anda lupa email maupun password anda tidak akan bisa masuk ke menu. Untuk bisa mengaktifkan kembali blackberry 10 anda maka harus melakukan flashing. Banyak yang share tentang bagaimana membuka anti thief blackberry 10.


Berikut langkah-langkah dan juga bahan yang digunakan untuk mengaktifkan kembali Blackberry 10 anda:

Bahan :
Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 1. File Autoloader Blackberry Z3 STJ100-1 dan STJ100-2 khusus buat anti thief
2. File Autoloader Blackberry Q10 SQN100-1/2/3/4/5/6/7 khusus buat anti thief

3. File Autoloader Blackberry Q5 SQR100-1/2/3 khusus buat anti thief

4. File Autoloader Blackberry Z30 STA100-1/2/3/4/5/6 khusus buat anti thief 

5. File Autoloader Blackberry Q30 SQW100-1/2/3 khusus buat anti thief

CARANYA :
1. Download autoloader 1 dan 2, sesuai dengan type BB anda
2. Install Drivernya Download driver Blackberry 10 (minimun xp sp3, install driver only)
3. Jalankan Autoloader ke-1 dulu, selesai, hape restart masih terkunci
4. Jalankan Autoloader ke-2, selesai hape restart sudah tidak terprotect
Untuk lengkapnya silahkan kunjungi link DISINI TUTORIAL BB Z10

Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


Minggu, 07 Agustus 2016

Flash Polytron R2506


Model Name  : great_a900f
Model Brand : POLYTRON
Model Device: great_a900f
AndrVersion : 4.4.2
BaseBand CPU: GREAT_A900F
Project Ver : Polytron_R2506_A900B_V03_2015.10.21
Model Ext   : POLYTRON R 2506

Bahan :
1. Download Firmware PAC Polytron R2506
2. Download Firmware Polytron R2506 via Infinity CM2 DOWNLOAD DISINI
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini




Log Read Fimware Polytron R2506
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : great_a900f
Model Brand : POLYTRON
Model Device: great_a900f
AndrVersion : 4.4.2
BaseBand CPU: GREAT_A900F
Project Ver : Polytron_R2506_A900B_V03_2015.10.21
Model Ext   : POLYTRON R2506

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1140 MiB
Saved to : G:\andro3\POLYTRON\R2506 7731\GREAT_A900F_great_a900f_4.4.2_Polytron_R 2506_A900B_V03_2015.10.21_POLYTRON_R2506\
kangsuper.blogspot.co.id
Done!

Elapsed: 00:05:30