kangsuper

Sabtu, 08 Oktober 2016

Firmware Flash Mito T89 V2 T03

 Mito T89 V2 3G T03

Model Name  : sp7731geaplus_k03_whxmito_64_4_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_32_4
Project Ver : LMY47D release-keys
Model Ext   : MITO_T89

Bahan :
1. Download Firmware PAC  Flash Mito T89 V2 3G SC7731 T03 atau Download Disini
2. Download Firmware PAC MITO_T89 v2_3G_201604061542_TN7 atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara  Flash Mito T89 V2 T03


Log Read Firmware Mito T89 T03
 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_whxmito_64_4_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_32_4
Project Ver : LMY47D release-keys
Model Ext   : MITO_T89

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1533 MiB
Saved to : F:\andro3\mito\t89\v2\SP7731GEA_K03_WHXMITO_32_4_scx35_sp7731gea_k03_whxmito_64_4_5.1_LMY47D_release-keys_MITO_T89\
Done!



5 komentar:

  1. kang minta pass nya untuk evercoss at1d

    BalasHapus
  2. flashing sukses, tpi msih sayang-sayangan itu gmna ya ??? solusiiii

    BalasHapus
    Balasan
    1. kmungkinan emmc dah read only, hanya direct ato ganti emmc, klo punya cm2 atau box flash anda bisa cek apakah ic emmc sudah read only?
      klo tanpa box mau cek ya man bisa menerawang aja, salah satunya, stlh flash dan reset, tidak ada yg berubah termasuk walpaper dan sms, tidak hilang. thx

      Hapus

Posting Komentar