kangsuper

Sabtu, 30 Juli 2016

Flash Advan S45C Build Number : TCS4511A/C11-M3/KitKat4.4


Loading    : ADVAN S45C TCS4511A C11-M3 KITKAT4.4.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : V2
FastCheck  : 0x0035D5CE89
Model Name  : revo_3204
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 2/2/2015 3:51:26 AM
Project Ver : TCS4511_ADVAN_S45C_V2.0_20150202
Model Ext   : S45C
Firmware Advan S45C Build Number : TCS4511A/C11-M3/KitKat4.4

Bahan:

1. Download Fimware PAC  Research Download S45C Build Number : TCS4511A/C11-M3/KitKat4.4 atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Flash Advan S45C Build Number : TCS4511A/C11-M3/KitKat4.4  via Research Download

 Log Read Advan S45C
Operation : Check/Read Info [ v1.18 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : revo_3204
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 2/2/2015 3:51:26 AM
Project Ver : TCS4511_ADVAN_S45C_V2.0_20150202
Model Ext   : S45C

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:15


Flash Redmi Note 2 2015056 BI Bahasa Indonesia

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P197

Flash Redmi Note 2 2015056 BI Bahasa Indonesia


Bahan :
  1.  Download  Redmi Note 2 2015056 BI DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Redmi Note 2 2015056 via SP Flash Tool

 Log Read Firmware Redmi Note 2 2015056

Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303332473734009EE8B353A27D
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 110100303332473734009EE8B353A27D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : EA8223CB18D145910A9F71A11A44E39F
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P197

[Read Ok] : preloader_lcsh6795_lwt_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2089 MiB
Scatter saved to : G:\andro3\xiaomi\note 2 2015056\MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P197\
kangsuper.blogspot.co.id
All done!

Done!
Elapsed: 00:09:43



Flash Asiafone AF9880 DCN


Brand     : alps
ProdName  : a500_emmc
ProdModel : ASIAFONE AF9880
Device    : a500_emmc
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

Bahan :
  1.  Download Firmware Asiafone AF9880 DCN scatter full backup  Download DISINI
  2.  Download Firmware Asiafone AF9880 DCN  Download DISINI
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Asiafone AF9880 DCN Via Flashtool

Log Read Firmware Asiafone AF9880 DCN

Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E503058585858106859F9E721DD
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX0
[eMMC] : FLASH_CID : FE014E503058585858106859F9E721DD
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 51292596F0F669EC038F47C047424824
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : alps
ProdName  : a500_emmc
ProdModel : ASIAFONE AF9880
Device    : a500_emmc
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_a500_emmc.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / a500_emmc / EMMC
Android Info saved
HWConfig Info saved
FW Size : 689 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__alps__ASIAFONE_AF9880__a500_emmc__4.2.2__ALPS.JB3.MP.V1.6\

All done!

Done!
Elapsed: 00:03:48





Kamis, 21 Juli 2016

Flash Huawei Y336-U02 BI Bahasa Indonesia


Firmware Huawei Y336-U02 BI Bahasa Indonesia

Bahan:

1. Download Fimware Huawei Y336-U02 BI Bahasa Indonesia Download Disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



Error pada research download baca disini

Video Flashing Huawei Y336-U02 dengan Research Download

Load PAC Huawei Y336-U02 BI Bahasa Indonesia



Minggu, 17 Juli 2016

Flash Axioo Picophone M1 GEE



Brand     : Axioo
ProdName  : PICOphoneM
ProdModel : PICOphone M1
Device    : PICOphoneM
AndroidVer: 4.2.2
MTKxCPU   : MT6572


Bahan :
  1.  Download Axioo Picophone M1 GEE  Stock Rom Backup CM2 Download Disini
  2.  Download Axioo Picophone M1 GEE  Stock Rom Backup UFI Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Axioo Picophone M1 via Flash Tool



Log read firmware Axioo Picophone M1
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393051CF874DA52171
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393051CF874DA52171
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : Axioo
ProdName  : PICOphoneM
ProdModel : PICOphone M1
Device    : PICOphoneM
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : PICOphoneM1_GEE_SW20140327

[Read Ok] : preloader_bird72_wet_a_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / bird72_wet_a_jb3 / EMMC
FW Size : 538 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__Axioo__PICOphone_M1__PICOphoneM__4.2.2__PICOphoneM1_GEE_SW20140327\

All done!



Jumat, 01 Juli 2016

Flash Alcatel 4035X Bahasa Indonesia



Brand     : TCL
ProdName  : 4035X
ProdModel : 4035X
Device    : SOUL4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1
Flash Alcatel 4035X BI / Bahasa Indonesia

Bahan :
  1.  Download  Firmware Alcatel 4035X
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Flash Alcatel 4035X SP Flash Tool

Log Read Firmware Alcatel 4035X
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201F0B6E069910F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201F0B6E069910F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x7CA3E03B4E81C4AD31729CDCFF53792D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : TCL
ProdName  : 4035X
ProdModel : 4035X
Device    : SOUL4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_soul4.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / soul4 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1215 MiB
Scatter saved to : G:\andro3\ALCATEL MTK\MT6572__TCL__4035X__SOUL4__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:06:26
Reconnect Power/Cable!




Flash Advan S4M Build Number :


Model Name  : n9_sc7715ea_3204
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715EA
Project Ver : WG4026A_S4M_V2_20150309
Model Ext   : S4M

Bahan :

1. Download Fimware PAC  Flash via Research Download Advan S4M

A) ADVAN S4M Build Number : WG4026A/T6_B_M19_V3.2/KITKAT4.4

B) ADVAN S4M Build Number : WG4026C/T6_B_M19_V5.0/KITKAT4.4

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Flash Advan S4M via research download

Tentang Advan S4M



Log Read Firmware Advan S4M
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : n9_sc7715ea_3204
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715EA
Project Ver : WG4026A_S4M_V2_20150309
Model Ext   : S4M

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.45_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 836 MiB
Saved to : G:\InfinityBox\CM2SPD\Flash\advan s4m 7715\SCX15_SP7715EA_Vandroid_4.4.2_WG4026A_S4M_V2_20150309_S4M\
Done!

Elapsed: 00:07:41